Activities of Kateřina KONEČNÁ related to 2022/0094(COD)
Shadow reports (1)
REPORT on the proposal for a regulation of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products, amending Regulation (EU) 2019/1020 and repealing Regulation (EU) 305/2011
Amendments (17)
Amendment 335 #
Proposal for a regulation
Article 1 – paragraph 1 – introductory part
Article 1 – paragraph 1 – introductory part
This Regulation establishes harmonised rules for the making available on the market and direct installation and de- installation of construction products, regardless of whether undertaken in the framework of a service or not, by establishing:
Amendment 473 #
Proposal for a regulation
Article 3 – paragraph 1 – point 71 a (new)
Article 3 – paragraph 1 – point 71 a (new)
(71 a) ‘recyclability’ means the management and processing of waste by design, based on separate collection, sorting in separate streams, recycling at commercial scale, and use of recycled materials to replace the same virgin materials in new products.
Amendment 545 #
Proposal for a regulation
Article 5 – title
Article 5 – title
Product performance and information requirements
Amendment 546 #
Proposal for a regulation
Article 5 – paragraph 1
Article 5 – paragraph 1
1. All products covered by this Regulation shall, prior to their placing on the market or direct installation, satisfy the generic, directly applicable product information requirements set out in Annex I Part D and the product performance requirements laid down in Annex I Part B and C as specified for the respective product family or category in accordance with paragraph 2. The product requirements laid down in Annex I Part B and C are only applicable where they have been specified in accordance with paragraph 2.
Amendment 552 #
Proposal for a regulation
Article 5 – paragraph 2
Article 5 – paragraph 2
2. In order to specify the product requirements set out in Annex I Part B, C and D, the Commission is empowered to supplement this Regulation, by means of delegated acts in accordance with Article 87, by specifying, for particular product families and categories, these product requirements and by laying down the corresponding assessment methods. Once the Commission has specified these product requirements by delegated acts, iIt may issue standardisation requests which aim at the elaboration of voluntary harmonised standards providing presumption of conformity with these mandatory product requirements as specified by these delegated acts.
Amendment 587 #
Proposal for a regulation
Article 7 – paragraph 8
Article 7 – paragraph 8
8. Member States may ban the destruction of surplus and unsold products and of products taken back in accordance with Article 22(2), point (j) and Article 26 or make the destruction of these products dependent on their prior making available on a national brokering platform for non- commercial use of products.
Amendment 616 #
Proposal for a regulation
Article 13 – paragraph 1 – point a
Article 13 – paragraph 1 – point a
(a) verify the product’s compliance with the product requirements of Annex I Part B and C to the extent that they have been specifiedor by delegated acts in accordance with Article 5(2), and with the product requirements of Annex I Part D;
Amendment 656 #
Proposal for a regulation
Article 18 – paragraph 1
Article 18 – paragraph 1
Markings other than the CE marking, including private ones, may be affixed on a product only if they do not cover or refer to harmonised technical specifications or to product requirements or essential characteristics or assessment methods included in the harmonised zone. These restrictions shall not apply to the EU Ecolabel and other state commissioned type I-ecolabels (ISO14024)
Amendment 677 #
Proposal for a regulation
Article 19 – paragraph 6
Article 19 – paragraph 6
6. An economic operator mayshall inform authorities of any likely infringement of this Regulation it becomes aware of. Where this economic operator considers that non-conforming products present a risk to human safety or to the environment, it shall immediately inform the competent authorities of the Member States in which it made the product available thereof, giving details, in particular, of the non- compliance and of any corrective measures taken.
Amendment 694 #
Proposal for a regulation
Article 22 – paragraph 2 – subparagraph 1 – point b
Article 22 – paragraph 2 – subparagraph 1 – point b
(b) under the conditions set out in point (a)(i) and (ii) give preference to recyclable materials and materials gained from re-use and recycling;
Amendment 696 #
Proposal for a regulation
Article 22 – paragraph 2 – subparagraph 1 – point h
Article 22 – paragraph 2 – subparagraph 1 – point h
(h) design products in such a way that re-use, remanufacturing and recycling are facilitated, namely by facilitating the separation of components and materials at de-installation, deconstruction and demolition and at the later stage of recycling and avoiding mixed, blended or intricate materials, unless remanufacturing and recycling are risky for human safety or the environment. In this case the manufacturer shall refrain from such design and warn against remanufacturing and recycling in accordance with the following point;
Amendment 753 #
Proposal for a regulation
Article 61 – paragraph 4 – point c
Article 61 – paragraph 4 – point c
(c) a product placed on the market, due to its physical condition, is likely to cause a serious risk.
Amendment 827 #
Proposal for a regulation
Article 84 – paragraph 3 a (new)
Article 84 – paragraph 3 a (new)
3 a. In spite of paragraphs 1 and 2, Member States shall always be allowed to use officially recognised ENISO 14024 ecolabels as a selection criteria in line with Directive 2014/24/EU article 43.
Amendment 867 #
Proposal for a regulation
Annex I – Part A – point 1 – point 1.3 – paragraph 2 – introductory part
Annex I – Part A – point 1 – point 1.3 – paragraph 2 – introductory part
The construction works and any part of them shall be designed, constructed, used, maintained and demolished in such a way that they, throughout their life cycle, do not present acute or chronic threat to the health and safety of workers, occupants or neighbors as a result of any of the following:
Amendment 874 #
Proposal for a regulation
Annex I – Part A – point 1 – point 1.5 – paragraph 2 – point a
Annex I – Part A – point 1 – point 1.5 – paragraph 2 – point a
(a) does not create immediate or chronic risks for the human health;
Amendment 908 #
Proposal for a regulation
Annex I – Part D – point 1 – point 1.3 – introductory part
Annex I – Part D – point 1 – point 1.3 – introductory part
1.3. Transport, installation, maintenance, de- installation, deconstruction and demolition rules:
Amendment 910 #
Proposal for a regulation
Annex I – Part D – point 1 – point 1.3 – point a – introductory part
Annex I – Part D – point 1 – point 1.3 – point a – introductory part
(a) Safety during transport, installation, maintenance, de- installation, deconstruction and demolition: