449 Amendments of Maria Veronica ROSSI
Amendment 7 #
2023/2066(INI)
Draft opinion
Paragraph 1
Paragraph 1
1. Observes that disparities across the EU have been exacerbated by mass and uncontrolled immigration, the COVID- 19 pandemic, the war of aggression against Ukraine and the current rise in living costs and have negatively affected children and their families in terms of income, access to employment, living and security conditions, education and skills and access to care;
Amendment 35 #
2023/2066(INI)
Draft opinion
Paragraph 2 a (new)
Paragraph 2 a (new)
2a. Stresses the important role of parents in the education of their children and therefore the need to devote sufficient time to them. Calls on the Member States to introduce measures to support parents who spend part or all of their time on bringing up their children, such as better consideration of maternity and paternity leave in the calculation of pension rights and support for reintegration into employment;
Amendment 124 #
2023/0226(COD)
Proposal for a regulation
Recital 10
Recital 10
(10) The legal framework for NGT plants should share the objectives of the Union GMO legislation to ensure a high level of protection of human and animal health and of the environment and the good functioning of the internal market for the concerned plants and products, while addressing the specificity of NGT plants. This legal framework should enable theallow for flexibility and adaptation to ensure the continued yet monitored development and placing on the market of plants, food and feed containing, consisting of or produced from NGT plants and other products containing or consisting of NGT plants (‘NGT products’) so as to contribute to the innovation and sustainability objectives of the European Green Deal and the Farm to Fork, Biodiversity and Climate Adaptation strategies and to enhance the competitiveness ofin order to enhance the competitiveness and profitability of companies especially small and medium- sized enterprises in the Union agri-food sector at Union and world level.
Amendment 182 #
2023/0226(COD)
Proposal for a regulation
Recital 18
Recital 18
(18) Since the criteria for considering that a NGT plant is equivalent to naturally occurring or conventionally bred plants are unrelated to the type of activity that requires the deliberate release of the NGT plant, a declaration of the category 1 NGT plant status made prior to its deliberate release for any other purpose than placing on the market in the territory of the Union should also be valid for the placing on the market of related NGT products. In view of the high uncertainty existing at the field trial stage about the product reaching the market and the likely involvement of smaller operators in such releases, the verification procedure of category 1 NGT plant status prior to field trials should be conducted by national competent authorities as this would be less administratively burdensome for operators, and a decision should be taken at Union level only in case there are comments to the verification report by other national competent authorities. Where the verification request is submitted prior to the placing on the market of NGT products, the procedure should be conducted at Union levelin consultation with the Commission and the European Food Safety Authority (‘the Authority’) only if there are reasoned objections by other Member States in order to ensure effectiveness of the verification procedure and consistency of the category 1 NGT plant status declarations.
Amendment 188 #
2023/0226(COD)
Proposal for a regulation
Recital 18 a (new)
Recital 18 a (new)
(18a) With a view to effectively selecting new varieties that help the agricultural sector to increase food security and sustainability and to adapt to and ensure resilience to the consequences of climate change, the specific nature of polyploid plants – those containing more than two genomes – needs to be considered. This is the case, for instance, with wheat, potato, sugar beet, banana, kiwi, peanut, rapeseed, etc. For polyploid plants, the maximum number of genetic modifications allowed for inclusion in category 1 NGT should be proportionate to the number of genomes they contain.
Amendment 255 #
2023/0226(COD)
Proposal for a regulation
Recital 26
Recital 26
(26) Category 2 NGT plants and products, in order to be released into the environment or placed on the market, should remain subject to a consent or authorisation in accordance with Directive 2001/18/EC or Regulation (EC) No 1829/2003. However, given the wide variety of those NGT plants, the amount of information necessary for the risk assessment will vary on a case-by-case basis. The Authority, in its scientific opinions on plants developed through cisgenesis and intragenesis48 and on plants developed through targeted mutagenesis49 recommended flexibility in data requirements for the risk assessment of these plants. Based on the Authority’s ‘Criteria for risk assessment of plants produced by targeted mutagenesis, cisgenesis and intragenesis’ (50 ), considerations on the history of safe use, familiarity for the environment and the function and structure of the modified/inserted sequence(s) should assist in determining the type and amount of data required to perform the risk assessment of those NGT plants. It is therefore necessary to establish general principles and criteria for the risk assessment of these plants, while providing for flexibility and possibility to adapt risk assessment methodologies to scientific and technical progress. As per EFSA’s considerations in the above-mentioned document on criteria for risk assessment, the concept and utility of the history of safe use should be clarified, giving recognition of safety records in third countries. _________________ 48 EFSA GMO Panel (EFSA Panel on Genetically Modified Organisms), Mullins E, Bresson J-L, Dalmay T, Dewhurst IC, Epstein MM, Firbank LG, Guerche P, Hejatko J, Moreno FJ, Naegeli H, Nogué F, Sánchez Serrano JJ, Savoini G, Veromann E, Veronesi F, Casacuberta, J, Fernandez Dumont A, Gennaro A, Lenzi, P, Lewandowska A, Munoz Guajardo IP, Papadopoulou N and Rostoks N, 2022. Updated scientific opinion on plants developed through cisgenesis and intragenesis. EFSA Journal 2022;20(10):7621, 33 pp. https://doi.org/10.2903/j.efsa.2022.7621. 49 EFSA GMO Panel (EFSA Panel on Genetically Modified Organisms), Naegeli H, Bresson J-L, Dalmay T, Dewhurst IC, Epstein MM, Firbank LG, Guerche P, Hejatko J, Moreno FJ, Mullins E, Nogué F, Sánchez Serrano JJ, Savoini G, Veromann E, Veronesi F, Casacuberta J, Gennaro A, Paraskevopoulos K, Raffaello T and Rostoks N, 2020. Applicability of the EFSA Opinion on site-directed nucleases type 3 for the safety assessment of plants developed using site-directed nucleases type 1 and 2 and oligonucleotide-directed mutagenesis. EFSA Journal 2020;18(11):6299, 14 pp. https://doi. org/10.2903/j.efsa.2020.6299. 50 EFSA GMO Panel (EFSA Panel on Genetically Modified Organisms), Mullins E, Bresson J-L, Dalmay T, Dewhurst IC, Epstein MM, Firbank LG, Guerche P, Hejatko J, Moreno FJ, Naegeli H, Nogué F, Rostoks N, Sánchez Serrano JJ, Savoini G, Veromann E, Veronesi F, Fernandez A, Gennaro A, Papadopoulou N, Raffaello T and Schoonjans R, 2022. Statement on criteria for risk assessment of plants produced by targeted mutagenesis, cisgenesis and intragenesis. EFSA Journal 2022;20(10):7618, 12 pp. https://doi.org/10.2903/j.efsa.2022.7618.
Amendment 305 #
2023/0226(COD)
Proposal for a regulation
Recital 36
Recital 36
Amendment 339 #
2023/0226(COD)
Proposal for a regulation
Recital 40 a (new)
Recital 40 a (new)
(40a) NGT plants and products imported into the Union shall be subject to the same obligations as those originating in the Union.
Amendment 410 #
2023/0226(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 6
Article 3 – paragraph 1 – point 6
(6) ‘breeders’ gene poolgene pool for breeding purposes’ means the total genetic information available in one species and other taxonomic species with which it can be cross-bred, including by using advanced techniques such as embryo rescue, induced polyploidy and bridge crosses;
Amendment 414 #
2023/0226(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 6 a (new)
Article 3 – paragraph 1 – point 6 a (new)
(6a) 'Polyploidy’ means the presence of more than two genomes in a single cell;
Amendment 486 #
2023/0226(COD)
Proposal for a regulation
Article 5 – title
Article 5 – title
Status of category 1 NGT plants and category 1 NGT products
Amendment 506 #
2023/0226(COD)
Proposal for a regulation
Article 5 – paragraph 3
Article 5 – paragraph 3
3. The Commission is empowered to adopt delegated acts in accordance with Article 26 amending the criteria of equivalence of NGT plants to conventional plants laid down in Annex I in order to adapt them to scientific and technological progress as regards the types and, extent, dimensions and number of modifications which can occur naturally or through conventional breeding.
Amendment 567 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 7
Article 6 – paragraph 7
7. The other Member States and the Commission may make commentreasoned objections to the verification report with regard to whether the criteria set out in Annex I have been met within 20 days from the date of receipt of that report.
Amendment 571 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 7
Article 6 – paragraph 7
7. The other Member States and the Commission may make commentsreasoned scientific opinion to the verification report within 20 days from the date of receipt of that report.
Amendment 580 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 8
Article 6 – paragraph 8
8. In the absence of any commentreasoned objections from a Member State or the Commission, within 10 working days from the expiry of the deadline referred to in paragraph 7, the competent authority that prepared the verification report shall adopt a decision declaring whether the NGT plant is a category 1 NGT plant. It shall transmit the decision without undue delay to the requester, the other Member States and to the Commission.
Amendment 581 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 8
Article 6 – paragraph 8
8. In the absence of any comments from a Member State or the Commissionreasoned objections from the Commission or Member States, within 10 working days from the expiry of the deadline referred to in paragraph 7, the competent authority that prepared the verification report shall adopt a decision declaring whether the NGT plant is a category 1 NGT plant. It shall transmit the decision without undue delay to the requester, the other Member States and to the Commission.
Amendment 587 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 9
Article 6 – paragraph 9
9. In cases where a commentreasoned objection is made by another Member State or by the Commission by the deadline referred to in paragraph 7, the competent authority that prepared the verification report shall forward the comment(s) to the Commissionupon request make the reasoned objections available to the other Member States without undue delay.
Amendment 589 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 9
Article 6 – paragraph 9
9. In cases where a commentreasoned objection is made by another Member State or by the Commission by the deadline referred to in paragraph 7, the competent authority that prepared the verification report shall forward the comment(s) toobjections and their justifications to the Member States and the Commission without undue delay.
Amendment 596 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 10
Article 6 – paragraph 10
10. The Commission, after having consulted the European Food Safety Authority (‘the Authority’), shall prepare a draft decision declaring whether the NGT plant is a category 1 NGT plant within 45 working days from the date of receipt of the comment(s), taking the latterreasoned objections and their justifications, taking that information into account. The decision shall be adopted in accordance with the procedure referred to in Article 28(2).
Amendment 599 #
2023/0226(COD)
Proposal for a regulation
Article 6 – paragraph 10
Article 6 – paragraph 10
10. The Commission, after having consulted the European Food Safety Authority (‘the Authority’), shall prepare a draft decision declaring whether the NGT plant is a category 1 NGT plant within 45 working days from the date of receipt of the comment(s)reasoned objections, taking the latter into account. The decision shall be adopted in accordance with the procedure referred to in Article 28(2).
Amendment 707 #
2023/0226(COD)
Proposal for a regulation
Article 10 – title
Article 10 – title
Amendment 933 #
2023/0226(COD)
Proposal for a regulation
Article 24 – paragraph 1
Article 24 – paragraph 1
Member States and the European Commission shall take appropriate measures to avoid the unintended presence of category 2 NGT plants in products not subject to Directive 2001/18 or Regulation 1829/2003.
Amendment 1001 #
2023/0226(COD)
2a. The report shall also address progress achieved regarding regulatory cooperation with trade partners and include information on the impact of divergent legislative approaches in third countries on EU international trade. In that regard, the following elements should be included in the report: - progress achieved in developing (private- public) Databases on NGT plants at global or third country level, in order to foster open dialogue with third countries. - overview of outcome of risk assessment (including environmental) in main trade partners’ countries, and how this can feed into the EU regulatory framework.
Amendment 1008 #
2023/0226(COD)
Proposal for a regulation
Article 30 – paragraph 4
Article 30 – paragraph 4
4. No sooner than two years after the publication of the first report referred to in paragraph 1 the Commission shall carry out an evaluation of the implementation of this Regulation and its impact on human and animal health, the environment, consumer information, the functioning of the internal market, and economic, environmental and social sustainability. The analysis should also cover the successes and limitations of the Regulation and include proposals to enable fair access of farmers to NGT 1 products.
Amendment 1051 #
2023/0226(COD)
Proposal for a regulation
Annex I – paragraph 1
Annex I – paragraph 1
A NGT plant is considered equivalent to conventional plants when it differs from the recipient/parental plant by no more than 20 genetic modifications of the types referred to in points 1 to 5, in any DNA sequence sharing sequence similarity with the targeted site that can be predicted by bioinformatic toolsplants obtained by means of conventional selection methods when it contains only the genetic modifications referred to in points 1 to 5 and when it differs from the recipient/parental plant by no more than 20 genetic modifications, excluding off-target modifications, of the types referred to in points 1, 2 and 4, in the targeted site or sites in the monoploid genome.
Amendment 1064 #
2023/0226(COD)
Proposal for a regulation
Annex I – point 1
Annex I – point 1
(1) targeted substitution or insertion of no more than 20 nucleotides;
Amendment 1071 #
2023/0226(COD)
Proposal for a regulation
Annex I – point 2
Annex I – point 2
(2) targeted deletion of any number of nucleotides;
Amendment 1079 #
2023/0226(COD)
Proposal for a regulation
Annex I – point 3 – point a
Annex I – point 3 – point a
(a) targeted insertion of a contiguous DNA sequence existing in the breeder’s gene pool;
Amendment 1081 #
2023/0226(COD)
Proposal for a regulation
Annex I – point 3 – point a
Annex I – point 3 – point a
(a) targeted insertion of a contiguous DNA sequence existing in the breeder’s gene pool;
Amendment 1088 #
2023/0226(COD)
Proposal for a regulation
Annex I – point 3 – point b
Annex I – point 3 – point b
(b) targeted substitution of an endogenous DNA sequence with a contiguous DNA sequence existing in the breeder’s gene pool;
Amendment 1101 #
2023/0226(COD)
Proposal for a regulation
Annex I – point 5
Annex I – point 5
(5) any other targeted modification of any size, on the condition that the resulting DNA sequences already occur (possibly with modifications as accepted under points (1) and/or (2)) in a species from the breeders’ gene pool on the condition that the genetic modification does not interrupt an endogenous gene.
Amendment 1177 #
2023/0226(COD)
Proposal for a regulation
Annex III – Part 1 – paragraph 1 – point 3
Annex III – Part 1 – paragraph 1 – point 3
(3) tolerance/resistance to abiotic stresses, including those created or exacerbated by climate change conditions;
Amendment 1187 #
2023/0226(COD)
Proposal for a regulation
Annex III – Part 2
Annex III – Part 2
Amendment 1120 #
2023/0131(COD)
Proposal for a regulation
Article 70
Article 70
Amendment 1170 #
2023/0131(COD)
Proposal for a regulation
Article 71 – paragraph 2 – point a
Article 71 – paragraph 2 – point a
(a) nineten years for orphan medicinal products other than those referred to in points (b) and (c);
Amendment 1173 #
2023/0131(COD)
Proposal for a regulation
Article 71 – paragraph 2 – point b
Article 71 – paragraph 2 – point b
Amendment 1210 #
2023/0131(COD)
Proposal for a regulation
Article 71 – paragraph 3
Article 71 – paragraph 3
3. Where a marketing authorisation holder holds more than one orphan marketing authorisations for the same active substance, those authorisations shall not benefit from separate market exclusivity periods whose duration is outlined in paragraph 2. The duration of theeach market exclusivity period shall start from the date when the firstcorresponding orphan marketing authorisation was granted in the Union.
Amendment 1220 #
2023/0131(COD)
Proposal for a regulation
Article 72
Article 72
Amendment 81 #
2023/0124(COD)
Proposal for a regulation
Recital 1
Recital 1
(1) The conditions for placing and making available on the market of detergents and surfactants for detergents have been harmonised through Regulation (EC) No 648/2004 of the European Parliament and of the Council29 . _________________ 29 Regulation (EC) No 648/2004 of the European Parliament and of the Council of 31 March 2004 on detergents (OJ L 104, 8.4.2004, p. 1).
Amendment 95 #
2023/0124(COD)
Proposal for a regulation
Recital 19
Recital 19
(19) In order to safeguard the functioning of the internal market and to ensure that the objective of providing a high level of protection of health and the environment is achieved, it is necessary to establish that detergents and surfactants from third countries entering the Union market also comply with this Regulation. In particular, it is necessary to ensure that appropriate conformity assessment procedures have been carried out by manufacturers with regard to those products. It is also necessary to lay down rules for importers to ensure that the detergents and surfactants they place on the market comply with those requirements and that the documentation drawn up by manufacturers and, where relevant, the CE marking areis available for inspection by the competent national authorities. Provision should also be made for importers to ensure that a product passport is available for those products.
Amendment 101 #
2023/0124(COD)
Proposal for a regulation
Recital 24
Recital 24
Amendment 103 #
2023/0124(COD)
Proposal for a regulation
Recital 28
Recital 28
(28) Fragrance substances are organic compounds with characteristic, usually pleasant, odours, which are widely used in detergents but also in many other products such as perfumes and other perfumed cosmetics. Those substances could cause an allergic reaction upon contact, especially to sensitised persons, even when contained in low concentrations. Therefore, it is important to provide information on the presence of individual allergenic fragrances in detergents so that sensitised persons can avoid contact with the substance to which they are allergic. It is therefore necessary to lay down strict requirements for the labelling of allergenic fragrances. However, those substances could also trigger a labelling requirement under Regulation (EC) No 1272/2008. Specific labelling requirements should therefore be established that would apply only when the labelling thresholds under Regulation (EC) No 1272/2008 are not met. This will not only prevent the unnecessary burden for economic operators but also ensure that end-users receive this information presented in a clear manner thus providing a high level of protection of human health even for sensitised persons. As the fragrance allergens established in Regulation (EC) No 1223/2009 are directly applicable to detergents under this Regulation, the same transition periods should apply to both cosmetic and detergent products.
Amendment 107 #
2023/0124(COD)
Proposal for a regulation
Recital 31
Recital 31
(31) Digital labelling could improve the communication of labelling information both by avoiding overcrowded physical labels and by allowing users to rely on various reading options available only for digital formats, such as increased font, automatic search, loud speakers or translation into other languages. Providing digital labels could also lead to a more efficient management of the labelling obligations by economic operators, by facilitating the update of labelling information, reducing labelling costs and permitting a more targeted information of users. Therefore, economic operators should be allowed to provide certain labelling information only through the digital label subject to certain conditions to ensure a high level of protection of detergents’ users.
Amendment 111 #
2023/0124(COD)
Proposal for a regulation
Recital 32
Recital 32
(32) To avoid imposing an unnecessary administrative burden for economic operators and since, in most cases, the digital label is onlyften complementary to the physical one, economic operators should be able to decide whether to use digital labels or provide all the information on a physical label only. The choice to provide a digital label should rest with manufacturers and importers, who are responsible for providing the accurate set of labelling information.
Amendment 114 #
2023/0124(COD)
Proposal for a regulation
Recital 33
Recital 33
(33) Digital labelling could also create challenges for the vulnerable population groups with no or insufficient digital skills and lead to an accentuation of the digital divide. For this reason, the specific information to be provided only in a digital label should reflect the current state of the digitalisation of the society and the particular situation of detergents users. In addition, all the labelling information concerning the protection of health and the environment, as well as minimum use instructions of detergents, should remain on the physical label, to enable all end- users to make informed choices before buying the detergent and to ensure its safe handling.
Amendment 116 #
2023/0124(COD)
Proposal for a regulation
Recital 34
Recital 34
Amendment 122 #
2023/0124(COD)
Proposal for a regulation
Recital 36
Recital 36
(36) Given the current development of the digital skills, economic operators should also provide the labelling information by alternative means to end- users when they cannot access the digital label. This obligation should be imposed as a safety measure to reduce any potential risks by the unavailability of the labelling information, in particular as regards refilled detergents, where all the information may be provided in a digital label.
Amendment 124 #
2023/0124(COD)
Proposal for a regulation
Recital 37
Recital 37
(37) Since detergents have the same use and present the same risks irrespective of the format in which they are made available on the market, economic operators making detergents available on the market in a refill format should ensure that these comply with the same requirements as the pre-packaged ones. In addition, consumers should receive the required labelling information also when opting for refilled detergents. A physical copy of the label should always be visible at the refill station. The refill sale of detergents should, therefore, be explicitly covered by this Regulation in order to ensure a high level of protection of health and the environment and a level playing field for economic operators.
Amendment 128 #
2023/0124(COD)
Proposal for a regulation
Recital 44
Recital 44
(44) It is crucial to make clear to both manufacturers and users that by creating the product passport for detergent or surfactant and, where relevant, by affixing the CE marking, the manufacturer declares that the detergent or surfactant is in conformity with all applicable requirements and that the manufacturer takes full responsibility thereof.
Amendment 131 #
2023/0124(COD)
Proposal for a regulation
Recital 45
Recital 45
(45) Where certain information is provided only digitally, it is necessary to clarify that this information needs to be provided separately and clearly distinguished from each other but through a single data carrier. This will facilitate the work of market surveillance authorities but also provide clarity to end users regarding the different pieces of information that are available to them in a digital format.
Amendment 139 #
2023/0124(COD)
Proposal for a regulation
Article 1 – paragraph 1
Article 1 – paragraph 1
1. This Regulation establishes rules for the free movement of detergents and surfactants in the internal market while, at the same time, ensuring a high degree of protection of health and the environment.
Amendment 143 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 11 – introductory part
Article 2 – paragraph 1 – point 11 – introductory part
(11) ‘surfactant’ means any surface- active organic substance or mixture used in detergents, which has surface-active properties and which consists of one or more hydrophilic and one or more hydrophobic groups of such a nature and size that it is capable to perform allof fulfilling both of the following actionscriteria:
Amendment 144 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 11 – indent 1
Article 2 – paragraph 1 – point 11 – indent 1
– to reduces the surface tension of water below 45 mN/m; (at a concentration of 0.5 wt% at 20 °C)
Amendment 146 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 11 – indent 2
Article 2 – paragraph 1 – point 11 – indent 2
Amendment 147 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 11 – indent 3
Article 2 – paragraph 1 – point 11 – indent 3
– to form emulsions and/or microemulsions and/or micelless a clear micellar solution or a translucent microemulsion or stable emulsion without separation of insoluble matter when mixed with water at a concentration of 0.5 wt% and left to stand for one hour at 20°C;
Amendment 149 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 11 – indent 4
Article 2 – paragraph 1 – point 11 – indent 4
Amendment 152 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 16
Article 2 – paragraph 1 – point 16
Amendment 153 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 19
Article 2 – paragraph 1 – point 19
(19) ‘economic operator’ means the manufacturer, the authorised representative, the importer or the distributor;
Amendment 154 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 24
Article 2 – paragraph 1 – point 24
Amendment 158 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 34
Article 2 – paragraph 1 – point 34
Amendment 175 #
2023/0124(COD)
Proposal for a regulation
Article 2 – paragraph 1 – point 34 a (new)
Article 2 – paragraph 1 – point 34 a (new)
(34 a) 'model' means a combination of the product name along with the unique formula (as per the provisions for the Unique Formula Identifier (UFI), irrespective of whether a UFI code is required under Annex VIII to the CLP);
Amendment 205 #
2023/0124(COD)
Proposal for a regulation
Article 7 – paragraph 2 – subparagraph 2 – point c
Article 7 – paragraph 2 – subparagraph 2 – point c
Amendment 211 #
2023/0124(COD)
Proposal for a regulation
Article 7 – paragraph 3
Article 7 – paragraph 3
3. Manufacturers shall keep the technical documentation and the product passport for 105 years after the detergent or the surfactant covered by that documentation or product passport has been placed on the market.
Amendment 219 #
2023/0124(COD)
Proposal for a regulation
Article 8
Article 8
Amendment 222 #
2023/0124(COD)
Proposal for a regulation
Article 8 – paragraph 3 – subparagraph 2 – point b
Article 8 – paragraph 3 – subparagraph 2 – point b
(b) keep the product passport and technical documentation at the disposal of national market surveillance authorities for 105 years after the detergent or surfactant covered by those documents has been placed on the market;
Amendment 225 #
2023/0124(COD)
Proposal for a regulation
Article 9 – paragraph 2 – point b
Article 9 – paragraph 2 – point b
Amendment 229 #
2023/0124(COD)
Proposal for a regulation
Article 9 – paragraph 4
Article 9 – paragraph 4
4. Importers shall indicateWhen placing a detergent or surfactant on the market, importers shall indicate on the label of the detergent or surfactant their name, registered trade name or registered trade mark and the postal and email address ats which they can be contacted on the label of the detergent or surfactant. The contact details shall be in a language easily understood by end-users and market surveillance authoritiesell as email address or website address or phone number at which they can be contacted.
Amendment 231 #
2023/0124(COD)
Proposal for a regulation
Article 9 – paragraph 8
Article 9 – paragraph 8
8. Importers that consider or have reason to believe that a detergent or surfactant which they have placed on the market is not in conformity with this Regulation shall immediately takeinform the manufacturer and shall cooperate with the manufacturer and the competent authorities to ensure that the corrective measures necessary to bring that detergent or surfactant into conformity, to withdraw it or to recall it, as appropriate, are taken. Furthermore, where importers consider or have reason to believe that a detergent or surfactant which they have placed on the market presents a risk to health or to the environment, they shall immediately inform the manufacturer and the competent national authorities of the Member States in which they made the detergent or surfactant available on the market to that effect, giving details, in particular, of any non-compliance and of any corrective measures taken.
Amendment 235 #
2023/0124(COD)
Proposal for a regulation
Article 10 – paragraph 2 – point b
Article 10 – paragraph 2 – point b
Amendment 239 #
2023/0124(COD)
Proposal for a regulation
Article 10 – paragraph 3
Article 10 – paragraph 3
3. Where a distributor considers or has reason to believe that a detergent or surfactant is not in conformity with this Regulation, the distributor shall not make the detergent or surfactant available on the market until it has been brought into conformity. Furthermore, where the detergent or surfactant presents a risk to health or the environment, the distributor shall inform the manufacturer and, where relevant, the authorised representative or the importer to that effect as well as the market surveillance authorities.
Amendment 241 #
2023/0124(COD)
Proposal for a regulation
Article 10 – paragraph 5
Article 10 – paragraph 5
5. Distributors that consider or have reason to believe that a detergent or a surfactant which they have made available on the market is not in conformity with this Regulation shall make immediately inform the manufacturer or importer, as applicable, and shall cooperate with the manufacturer or importer and the competent authorities to ensure that the corrective measures necessary to bring that detergent or surfactant into conformity, to withdraw it or to recall it, as appropriate, are taken. Furthermore, where distributors consider or have reason to believe that a detergent or surfactant which they have made available on the market presents a risk to health or to the environment, they shall immediately inform the competent national authorities of the Member States in which they made the detergent or surfactant available on the market to that effect, giving details, in particular, of any non-compliance and of any corrective measures taken.
Amendment 244 #
2023/0124(COD)
Proposal for a regulation
Article 12 – paragraph 1 – point a
Article 12 – paragraph 1 – point a
(a) to ensure that the package bears his or her name, registered trade name or registered trade mark and postal address as well as email address or website address or phone number at which they can be contacted preceded by the words ‘packaged by’ or ‘repackaged by’;
Amendment 252 #
2023/0124(COD)
Proposal for a regulation
Article 15 – paragraph 1
Article 15 – paragraph 1
1. Detergents and surfactants that are made available on the market in individual packaging or in a refill format shall be accompanied by a label. physical or digital label. The data carrier through which the digital label is accessible to the end-user shall be visible on the label or at the refill station. A physical copy of the label should always be visible at the refill station.
Amendment 253 #
2023/0124(COD)
Proposal for a regulation
Article 15 – paragraph 2
Article 15 – paragraph 2
Amendment 258 #
2023/0124(COD)
Proposal for a regulation
Article 15 – paragraph 3 – subparagraph 1 – point b
Article 15 – paragraph 3 – subparagraph 1 – point b
(b) the manufacturer’s and where relevant, the importer’s name, registered trade name or registered trade mark and the postal and email address ats which they can be contacted. The postal address shall indicate a single point at which the manufacturerell as email address or website address or phone number at which they can be contacted;.
Amendment 263 #
2023/0124(COD)
Proposal for a regulation
Article 16 – paragraph 1 – subparagraph 1 – point a
Article 16 – paragraph 1 – subparagraph 1 – point a
(a) on a physical label; or
Amendment 271 #
2023/0124(COD)
Proposal for a regulation
Article 16 – paragraph 2
Article 16 – paragraph 2
2. By way of derogation from paragraph 1, where detergents are made available on the market directly to an end- user in a refill format, the label elements set out in Article 15(3) and (4) may be provided in a digital label only, with the exception of dDosage information for consumer laundry detergents as set out in point 1 and 2 of part BD of Annex V, which needs to should be provided also on a physical label.
Amendment 280 #
2023/0124(COD)
Proposal for a regulation
Article 17 – paragraph 3
Article 17 – paragraph 3
3. Where economic operators provide a digital label, the data carrier shall be accompanied by the statement ‘More comprehensive information on the product is available online’Please scan for more information’, or by a similar statement or pictogram.
Amendment 284 #
2023/0124(COD)
Amendment 291 #
2023/0124(COD)
Proposal for a regulation
Article 18 – paragraph 2 – point a
Article 18 – paragraph 2 – point a
(a) it shall correspond to a specific batchmodel of the detergent or surfactant;
Amendment 297 #
2023/0124(COD)
Proposal for a regulation
Article 18 – paragraph 2 – point f
Article 18 – paragraph 2 – point f
(f) it shall be accessible to end-users, market surveillance authorities, customs authorities, the Commission and other economic operators, taking into account the need to protect confidential business information and trade secrets;
Amendment 301 #
2023/0124(COD)
Proposal for a regulation
Article 18 – paragraph 2 – point g
Article 18 – paragraph 2 – point g
(g) it shall be available for a period of 105 years after the detergent or surfactant is placed on the market, also in cases of an insolvency, a liquidation or a cessation of activity in the Union of the economic operator that created the product passport;
Amendment 311 #
2023/0124(COD)
Proposal for a regulation
Article 19 – paragraph 1 – point b
Article 19 – paragraph 1 – point b
(b) all information included in the product passport shall be based on open standards developed with an interoperable format and shall be machine readable, structured and searchable; , taking into account the need to protect confidential business information and trade secrets;
Amendment 315 #
2023/0124(COD)
Proposal for a regulation
Article 20 – paragraph 1
Article 20 – paragraph 1
1. BNo later than 60 months after entry into force of the implementing acts defining technical requirements for the digital product passport and the data carrier and the establishment of the EU registry for the unique product identifier and the unique operator identifier, economic operators shall upload, before placing a detergent or surfactant on the market, economic operators shall upload, in the registry established under Article 12(1) of Regulation (EU) …/… on Ecodesign for Sustainable Products the unique product identifier and the unique operator identifier for the detergent or surfactant.
Amendment 327 #
2023/0124(COD)
Proposal for a regulation
Article 25 – paragraph 1 – point a
Article 25 – paragraph 1 – point a
Amendment 331 #
2023/0124(COD)
Proposal for a regulation
Article 26 – paragraph 7
Article 26 – paragraph 7
7. Where individual risk-based concentration limits for fragrance allergens are established in Regulation (EC) No 1223/2009 of the European Parliament and of the Council46 , the Commission shall adopt delegated acts in accordance with Article 27 amending Annex V in order to adapt the limit of the allergenic fragrances listed in Annex III to that Regulation accordingly. The transition periods established in Regulation (EC) No 1223/2009 shall also apply to detergents under this Regulation. _________________ 46 Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products (OJ L 342, 22.12.2009, p. 59).
Amendment 338 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 1 – paragraph 1 – point b – introductory part
Annex II – point 1 – paragraph 1 – point b – introductory part
(b) shall belong to both of the following:Risk Group I as defined by Directive 2000/54/EC – biological agents at work.
Amendment 341 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 1 – paragraph 1 – point b – point i
Annex II – point 1 – paragraph 1 – point b – point i
Amendment 342 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 1 – paragraph 1 – point b – point ii
Annex II – point 1 – paragraph 1 – point b – point ii
Amendment 348 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 5
Annex II – point 5
5. When placed on the market, detergents containing micro-organisms shall have a standard plate count equal to or greater than 1x105 colony-forming units (CFUs) per ml in accordance with ISO 4833-1:2014, but not limited to, ISO 4833-1:2014, ISO 21149 method or equivalent.
Amendment 350 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 6
Annex II – point 6
6. The minimum shelf life of a detergent containing micro-organisms shall not be lower than 24 months and the microbial count shall not decrease by more than 10 % every 12 months in accordance with ISO 4833-1:2014during this shelf life, the CFU count must remain equal to or greater than 1x105.
Amendment 351 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 7
Annex II – point 7
7. Micro-organisms contained in detergents that are placed on the market in a spray format shall pass the acute inhbe evaluation toxicity test in accordance with the test method B.2., described in Part B of the Annex to Regulation (EC) No 440/2008ed using appropriate non-animal approaches to ensure consumer safety of the end product.
Amendment 353 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 8
Annex II – point 8
Amendment 356 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 9
Annex II – point 9
Amendment 357 #
2023/0124(COD)
Proposal for a regulation
Annex II – point 11
Annex II – point 11
Amendment 362 #
2023/0124(COD)
Proposal for a regulation
Annex V – Part A – point 4
Annex V – Part A – point 4
4. If added at concentrations exceeding 0,01 % by weight, the allergenic fragrances that are listed in entries 45, 67- 92 and [X] to [X] of Annex III to Regulation (EC) No 1223/2009, shall be labelled using the system referred to in Article 33 of that Regulation. The first sentence shall not apply to allergenic fragrances that meet the labelling thresholds under Regulation (EC) No 1272/2008. For the placing on the market and making available on the market of detergents, the same transitional periods apply as for cosmetic products as defined in Regulation (EC) No 1223/2009.
Amendment 366 #
2023/0124(COD)
Proposal for a regulation
Annex V – Part B – point 1 – point a
Annex V – Part B – point 1 – point a
(a) the recommended quantities and/or dosage instructions expressed in millilitres or grams appropriate to a standard washing machine load, for soft, medium and hard water hardness levels and making provision for one or two cycle washing processes, or the recommended dosage instructions, expressed in number of units (e.g. tablets, capsules, sheets), corresponding to a standard washing machine load, adjusting the standard dosage, where relevant, for soft, medium, and hard water hardness,
Amendment 372 #
2023/0124(COD)
Proposal for a regulation
Annex V – Part B – point 3
Annex V – Part B – point 3
3. The label of consumer automatic dishwasher detergents shall indicate the standard dosage expressed in grams or millilitres or number of tabletsunits (e.g. tablets or capsules) for the main washing cycle for normally soiled tableware in a fully loaded 12 place settings dishwasher, adjusting the standard dosage, where relevant, for soft, medium, and hard water hardness.
Amendment 378 #
2023/0124(COD)
Proposal for a regulation
Annex V – Part D – paragraph 1 – point b
Annex V – Part D – paragraph 1 – point b
(b) the recommended quantities based on medium/average water hardness and different degrees of fabric soiling; and
Amendment 380 #
2023/0124(COD)
Proposal for a regulation
Annex V – Part D – paragraph 1 – point c
Annex V – Part D – paragraph 1 – point c
(c) an indication of the washing machinreference load.
Amendment 32 #
2023/0105(COD)
Proposal for a directive
Recital 2
Recital 2
(2) Council Directive 2001/110/EC20 lays down definitions, names, common rules on composition, quality and labelling requirements for honey. _________________ 20 Council Directive 2001/110/EC of 20 December 2001 relating to honey (OJ L 10, 12.1.2002, p. 47).
Amendment 36 #
2023/0105(COD)
Proposal for a directive
Recital 3
Recital 3
(3) In light of the close link between the quality of honey and its origin and the need for the consumer not to be misled regarding the quality of the product, Directive 2001/110/EC lays down rules on the labelling of the origin where the honey has been harvested. In particular, Article 2(4) of that Directive requires the country or countries of origin where the honey has been harvested to be indicated on the label and provides that, if honey originates in more than one Member State or third country, the mandatory indication of the countries of origin may be replaced by one of the following, as appropriate: ‘blend of EU honeys’, ‘blend of non-EU honeys’, ‘blend of EU and non-EU honeys’. The different rules adopted on this basis by Member States may have misled consumers and may have hindered the functioning of the internal market. In the light of the objectives of the Green Deal and of the Farm to Fork Strategy’s objective of strengthening consumers in making informed choices, including on the geographic origin of their food, and in the interest to preserve the efficient functioning of the internal market throughout the Union through a harmonisation of the labelling rules, it is appropriate to revise the rules for honey origin labelling and provide that the country or countries of origin should be mentioned on the packagingin decreasing order on the packaging. Given the particular interest shown by consumers in the geographical origin of honey in relation to its characteristics and quality, and the need for complete transparency in this sector, the country or countries of origin where the honey was harvested must appear on the label in the same field of vision as the product indication. In light of the reduced size of the packs containing only a single portion of honey (breakfast packs) and the resulting technical difficulties, it is therefore appropriate to exempt those packs from the obligation of listing all individual countries of origin, where the honey originates in more than one country.
Amendment 51 #
2023/0105(COD)
Proposal for a directive
Recital 3 a (new)
Recital 3 a (new)
(3a) Noting that the 2023 reports of DG Health – JRC – and of OLAF on the adulteration of honey ‘EU coordinated action ‘From the Hives’’ and ‘EU coordinated action to deter certain fraudulent practices in the honey sector – Analytical testing results of imported honeys’ show a very high proportion of imported honeys suspected of having been adulterated and confirm a range of cases of fraud in the honey sector; Given that some operators use ‘customised’ sugar syrups that are very difficult to detect even with the most sophisticated analytical techniques; Deploring the lack of official and validated analytical methods to detect new types of adulteration with sugar syrups, meaning that national authorities are unable to identify certain honeys as having been produced fraudulently; Stressing that a significant amount of honeys are present in the honey market that have been adulterated via the addition of sugar syrups either during honey production or at a certain stage in the packaging process.
Amendment 60 #
2023/0105(COD)
Proposal for a directive
Recital 3 b (new)
Recital 3 b (new)
(3b) Recognising that the term ‘filtered honey’ used in Directive 2001/110 is misunderstood by consumers, who confuse this industrial filtration with filtration carried out by beekeepers after extracting their honey to remove wax particles and other foreign elements from honey. Consequently, filtered honeys as defined in Directive 2001/110/EC should no longer be authorised for marketing under the name ‘honey’ and the definition of ‘filtered honey’ should be removed from the text of the Directive. Noting that the removal by filtration of a part or all of the pollen and figurative elements present in honey and a filter mesh size of less than 100 µm no longer enables correct identification of the geographical and/or botanical origin of a honey. This makes it much more difficult to distinguish between sugar syrup, or a blend of honey and syrup, and honey. Industrial filtration makes it impossible to trace honey using an analytical approach such as melissopalynology. Emphasising that Annex II to Directive 2001/110 should be amended to specify the permitted level of filtration, i.e. which should not significantly alter the density and pollen spectrum of honey, but rather removes most of the foreign substances present in honey.
Amendment 68 #
2023/0105(COD)
(3c) Pointing out that both the definition of honey in Directive 2001/110 EC and that of the Codex Alimentarius clearly specify the work done by bees in the hive after they have harvested their crop, which they transform by combining it with their own specific materials, deposit, dehydrate, store, and leave to ripen in the combs of the hive. Dehydration followed by ripening are operations carried out by bees. Outside the European Union, some countries accept that the work of bees in the production of honey is limited to harvesting nectar secretions from plants or honeydew. Unripe honeys produced in this way have a moisture content well in excess of the 20% threshold laid down in Directive 2001/110/EC. Operators work with heated vats under a vacuum to limit the boiling temperature of the water in the honey. However, this process degrades the final product by depleting its flavourings and enzymes. Insisting that the Honey Directive should prohibit this vacuum evaporation process for honeys.
Amendment 74 #
2023/0105(COD)
Proposal for a directive
Recital 3 d (new)
Recital 3 d (new)
(3d) Noting with concern that heat treatment above 40 °C (± 5 °C) causes degradation of certain constituents of honey. The indicators currently used, namely HMF and the diastase index, make it possible to assess the significant degradation of honeys, but do not make it possible to show the degradation of more sensitive honey constituents, such as invertase. The consumer must be able to distinguish between honeys that have not been exposed to treatments involving heating above 40°C (± 5°C) and other honeys. The words ‘virgin honey or unheated honey’ must therefore appear on the label. In order to check that the honey has not been degraded by heat treatment, a minimum threshold must be set for the honey’s invertase content as this is a much more sensitive enzyme that degrades very quickly at high temperatures.
Amendment 97 #
2023/0105(COD)
Proposal for a directive
Recital 7
Recital 7
(7) Therefore, considering, in particular, that consumers are increasingly aware of health concerns linked to the consumption of sugar, it is appropriate to revise the rules on the use of statements on sugar for fruit juices to allow consumers to make informed choices. It is therefore appropriate to reintroduce, without a time limitation, the possibility for the industry to use the statement indicating that no fruit juices contain added sugars or, on the contrary, that the fruit juices do contain added sugars.
Amendment 101 #
2023/0105(COD)
Proposal for a directive
Recital 7 a (new)
Recital 7 a (new)
(7a) Considering the objective of the Farm to Fork Strategy to empower consumers in making informed choices, including on the origin of food, and in the interest of preserving the efficient functioning of the internal market across the Union by harmonising labelling rules, in line with the requirements applicable to fresh fruit and in accordance with consumer expectations, there should be mandatory labelling of the place of origin of fruit used for the production of fruit juices and other similar products intended for human consumption.
Amendment 104 #
2023/0105(COD)
Proposal for a directive
Recital 9
Recital 9
Amendment 107 #
2023/0105(COD)
Proposal for a directive
Recital 10
Recital 10
(10) In accordance with Annex I to Directive 2001/112/EC, fruit nectars may contain added sugars and/or honey. In order to support the production and marketing of fruit, while taking into account the need to stimulate product reformulation to reduce the amount of sugars present in fruit nectars, the proportion of sugars and/or honey that may be added to fruit nectars that are naturally low in acidity and palatable should be lowered.
Amendment 112 #
2023/0105(COD)
Proposal for a directive
Recital 13 a (new)
Recital 13 a (new)
(13a) In the light of the Farm to Fork Strategy’s objective of strengthening consumers in making informed choices, including on the origin of their food, and in the interest of preserving the efficient functioning of the internal market across the Union by harmonising labelling rules, in line with the requirements applicable to fresh fruit and in accordance with consumer expectations, there should be mandatory labelling of the place of origin of fruit used for the production of fruit jams, jellies and marmalades and sweetened chestnut purée intended for human consumption.
Amendment 137 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 – point 1 a (new)
Article 1 – paragraph 1 – point 1 a (new)
Directive 2201/110/EC
Article 2 – paragraph 2 – subparagraph 1
Article 2 – paragraph 2 – subparagraph 1
(1a) Article 2(2), subparagraph 1 is replaced by the following: "(2) the product names referred to in Annex I, points 2 and 3, shall apply onexclusively to the products defined thereinin that Annex and shall be used in trade to designate them. TheseSuch names may be replaced by the simple product name "honey", exceptsave in the case of filtered honey, comb honey, chunk honey or cut comb in honey and baker's honey. honey with cut comb and baker's honey. Or. it (02001L0110)
Amendment 141 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 – point 1
Article 1 – paragraph 1 – point 1
Directive 2001/110/EC
Article 2 – paragraph 2 – point b a (new)
Article 2 – paragraph 2 – point b a (new)
in Article 2(2), the following point is added: ‘(ba) with the exception of honeys intended for industrial use, these names may be supplemented by indications of the absence of significant heat treatment. The term referring to the absence of significant heat treatments, such as “raw honey” or “unheated honey”, may be included on the label on the front of the commercial packaging of honey if no heat treatment has degraded highly sensitive enzymes such as invertase, from collection to packaging, in accordance with the conditions laid down in Annex II, points 6 (Diastase Index and hydroxymethylfurfural content) and 7 (invertase index).’
Amendment 146 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 – point 2 – introductory part
Article 1 – paragraph 1 – point 2 – introductory part
(2) in paragraph 4, points (a) and (b) are replaced by the following and points (c) and (d) are added:
Amendment 156 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 – point 2
Article 1 – paragraph 1 – point 2
Directive 2001/110/EC
Article 2 – paragraph 4 – point a
Article 2 – paragraph 4 – point a
(a) The country of origin where the honey has been harvested shall be indicated on the label and on the front of the packaging next to the product’s trade name. If the honey originates in more than one country, the countries of origin where the honey has been harvested shall be indicated on the front label of packs containing more than 25 g in descending order;
Amendment 173 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 – point 2
Article 1 – paragraph 1 – point 2
Directive 2001/110/EC
Article 2 – paragraph 4 – point b
Article 2 – paragraph 4 – point b
(b) For the purpoExcept in the cases of Regulation (EU) No 1169/2011 and in particular Articles 12 to 15 thereof, the particulars to be indicated according to point (a) of this paragraph shall be considered as mandatory particulars in accordance with Article 9 of that Regulation.’honey intended for industrial use, those names may be supplemented by information concerning the honey’s: – floral or vegetable origin, if the product comes wholly or mainly from the indicated origin and presents the organoleptic, physico-chemical and microscopic characteristics of the indicated origin and possesses its organoleptic, physico-chemical and microscopic characteristics; – regional, territorial or topographical origin, if the product comes entirely from the indicated source; – specific quality criteria.
Amendment 180 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 a (new)
Article 1 – paragraph 1 a (new)
Directive 2001/110/EC
Article 3
Article 3
Article 3 In the case of filtered honey and baker's honey, bulk containers, packs and trade documents shallis amended as follows: ‘Article 3 In the case of honey intended for industrial use, intermediate bulk containers, packaging and sales documentation must clearly indicate the full product name, as referred to in Annex I, point 2(b)(viii), and point 3.’ established in point 3 of the annex’ Or. it (02001L0110)
Amendment 198 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 a (new)
Article 1 – paragraph 1 a (new)
Amendment 216 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 b (new)
Article 1 – paragraph 1 b (new)
Directive 2001/110/EC
Annex II – paragraph 3
Annex II – paragraph 3
Amendment 223 #
2023/0105(COD)
Proposal for a directive
Article 1 – paragraph 1 c (new)
Article 1 – paragraph 1 c (new)
Directive 2001/110/EC
Annex II – paragraph 6 a (new)
Annex II – paragraph 6 a (new)
In Annex II, a new paragraph 6a is added: ‘6a. Invertase index (Gontarski unit) for ‘raw honeys’ or ‘unheated honeys’. Determined after processing and blending. – generally not less than 50 U/kg – honeys with a low natural enzyme content, not less than 25 U/kg.’
Amendment 230 #
2023/0105(COD)
Proposal for a directive
Article 2 – paragraph 1 – point 1 – point a
Article 2 – paragraph 1 – point 1 – point a
Directive 2001/112/EC
Article 3 – introductory part
Article 3 – introductory part
Amendment 233 #
2023/0105(COD)
Proposal for a directive
Article 2 – paragraph 1 – point 1 – point b a (new)
Article 2 – paragraph 1 – point 1 – point b a (new)
Directive 2001/112/EC
Article 3 – paragraph 3 a (new)
Article 3 – paragraph 3 a (new)
(ba) The following paragraph 3a is inserted: '3a.For products covered by Annex I, the country of origin where the fruit was harvested must be indicated on the label of packs. If the fruit used to made these products originates from more than one country, the countries of origin where the fruit was harvested shall be indicated on the label of packs. If the products are made from two or more species of fruit, the countries of origin where the fruit was harvested shall be indicated on the label of packs.
Amendment 266 #
2023/0105(COD)
Proposal for a directive
Annex I – paragraph 1 – point 1 – point a
Annex I – paragraph 1 – point 1 – point a
Directive 2001/112/EC
Annex I – part I – point 6
Annex I – part I – point 6
Amendment 273 #
2023/0105(COD)
Proposal for a directive
Annex I – paragraph 1 – point 1 – point b – point i – indent 1
Annex I – paragraph 1 – point 1 – point b – point i – indent 1
Council Directive 2001/112/EC
Annex I – part II – point 2 – indent 3
Annex I – part II – point 2 – indent 3
— For fruit juice, fruit juices from concentrate, concentrated fruit juices, reduced-sugar fruit juice and reduced- sugar fruit juices from concentrate: restored flavour, pulp and cells;;
Amendment 279 #
2023/0105(COD)
— For products defined in Part I, points 1 to 65 of Part I, in order to regulate acidic taste: lemon and/or lime juice and/or concentrated lemon and/or lime juice, up to 3 g per litre of juice, expressed as anhydrous citric acid;;
Amendment 280 #
2023/0105(COD)
Proposal for a directive
Annex I – paragraph 1 – point 1 – point b – point i – indent 4
Annex I – paragraph 1 – point 1 – point b – point i – indent 4
Directive 2001/112/EC
Annex I – part II – point 2 – indent 10
Annex I – part II – point 2 – indent 10
Amendment 285 #
2023/0105(COD)
Proposal for a directive
Annex I – paragraph 1 – point 1 – point b – point ii – indent 2
Annex I – paragraph 1 – point 1 – point b – point ii – indent 2
Directive 2001/112/EC
Annex I – part II – point 3 – indent 14
Annex I – part II – point 3 – indent 14
Amendment 294 #
2023/0105(COD)
Proposal for a directive
Annex I – paragraph 1 – point 2
Annex I – paragraph 1 – point 2
Directive 2001/112/EC
Annex III – Part I – point ha (new)
Annex III – Part I – point ha (new)
Amendment 295 #
2023/0105(COD)
Proposal for a directive
Annex I – paragraph 1 – point 2 a (new)
Annex I – paragraph 1 – point 2 a (new)
Directive 2001/112/EC
Annex V – row 20 a (new)
Annex V – row 20 a (new)
(2a) The following row shall be added to Annex V: 'Common name of the fruit: blood orange Botanical name: Citrus × sinensis Minimum Brix levels: 10"
Amendment 317 #
2023/0105(COD)
Proposal for a directive
Annex II – paragraph 1 – point 1 – point a
Annex II – paragraph 1 – point 1 – point a
Council Directive 2001/113/EC
Annex I – part I – indent 2 – subparagraph 4 – indent 5
Annex I – part I – indent 2 – subparagraph 4 – indent 5
– 1090 g for passion fruit.;
Amendment 67 #
2023/0085(COD)
Proposal for a directive
Recital 9 a (new)
Recital 9 a (new)
(9 a) Within the same context, the healthcare sector should be recognized as a relevant player in reducing the environmental pollution. It would therefore be essential for companies and healthcare professionals and beneficial for patients to establish a proper regulatory framework for using claims relating to biodegradability, sustainability, circularity and origin of the product’s components, both for medicinal products (according to Directive 2001/83) and medical devices (according to Regulations 2017/745).
Amendment 173 #
2023/0085(COD)
Proposal for a directive
Recital 64
Recital 64
(64) When setting penalties and measures for infringements, the Member States should foresee that, based on the gravity of the infringement, the level of fines should effectively deprive the non- compliant trader from the economic benefit derived from using the misleading or unsubstantiated explicit environmental claim or non-compliant environmental labelling scheme, including in cases of repeated infringements. The measures for infringements foreseen by the Member States should therefore also include confiscation of the relevant product from the trader or revenues gained from the transactions affected by this infringement or a temporary exclusions or prohibitions from placing products or making available services on the Union market. The gravity of the infringement should be the leading criterion for the measures taken by the enforcement authorities. The maximum amount of fines should be dissuasive and set at least at the level of 4% of the trader’s total annual turnover in the Member State or Member States concerned in case of widespread infringements with a Union dimension that are subject to coordinated investigation and enforcement measures in accordance with Regulation (EU) 2017/239488 . _________________ 88 Regulation (EU) 2017/2394 of the European Parliament and of the Council of 12 December 2017 on cooperation between national authorities responsible for the enforcement of consumer protection laws and repealing Regulation (EC) No 2006/2004 (OJ L 345, 27.12.2017, p. 1).
Amendment 177 #
2023/0085(COD)
(67) Where based on the results of the monitoring and evaluation of this Directive the Commission finds it appropriate to propose a review of this Directive, the feasibility and appropriateness of further provisions on mandating the use of common method for substantiation of explicit environmental claims, the extension of prohibition of environmental claims for products containing hazardous substances except where their use is considered essential for the societysafe and improves the sustainability of the product, or further harmonisation as regards requirements on the substantiation of specific environmental claims on environmental aspects or environmental impacts should also be considered.
Amendment 187 #
2023/0085(COD)
Proposal for a directive
Article 1 – paragraph 1
Article 1 – paragraph 1
1. This Directive applies to explicit environmental claims made by traders about products or traders in business-to- consumer commercial practices. It does not apply to environmental claims made in business-to-business commercial practices.
Amendment 208 #
2023/0085(COD)
Proposal for a directive
Article 1 – paragraph 2 – point o a (new)
Article 1 – paragraph 2 – point o a (new)
(o a) Regulations (EU) 2021/2115, 2021/2116, 2021/2117 of the European Parliament and of the Council, and legislative acts based on these Regulations;
Amendment 216 #
2023/0085(COD)
Proposal for a directive
Article 1 – paragraph 2 – point o b (new)
Article 1 – paragraph 2 – point o b (new)
(o b) Regulation (EU) 2012/1151 of the European Parliament and of the Council;
Amendment 218 #
2023/0085(COD)
Proposal for a directive
Article 1 – paragraph 2 – point o c (new)
Article 1 – paragraph 2 – point o c (new)
(o c) Directive (EU) 2018/2001 of the European parliament and on the Council on the promotion of the use of energy from renewable sources;
Amendment 538 #
2023/0085(COD)
Proposal for a directive
Article 8 – paragraph 2 – point d
Article 8 – paragraph 2 – point d
(d) the requirements for the environmental labelling scheme have been developed by experts that can ensure their scientific robustness and have been submitted for consultation to a heterogeneous group of stakeholders, that apply or are impacted by them or to their representatives, that has reviewed them and ensured their relevance from a societal perspective;
Amendment 619 #
2023/0085(COD)
Proposal for a directive
Article 10 – paragraph 3
Article 10 – paragraph 3
3. The verification and certification requirements shall apply to traders that are microenterprises within the meaning of Commission Recommendation 2003/361/EC only if they so request. In order to avoid unproportionate costs and burdens for microenterprises and SMEs, Member States shall put in place an alternative ad-hoc verification scheme.
Amendment 664 #
2023/0085(COD)
Proposal for a directive
Article 10 – paragraph 9 a (new)
Article 10 – paragraph 9 a (new)
9 a. Member States may set up procedures to prioritise the verification of existing environmental claims made before the entry into force of this Directive and may introduce a transitional period during which existing environmental claims, submitted for verification, can still be used.
Amendment 729 #
2023/0085(COD)
Proposal for a directive
Article 15 – paragraph 3
Article 15 – paragraph 3
3. Where, further to the evaluation referred to in the first subparagraph, the competent authorities find that the substantiation and communication of the explicit environmental claim or the environmental labelling scheme does not comply with the requirements laid down in this Directive, they shall notify the trader making the claim about the non- compliance and require that trader to take all appropriate corrective action within 360 days to bring the explicit environmental claim or the environmental labelling scheme into compliance with this Directive or to cease the use of and references to the non-compliant explicit environmental claim. Such action shall be as effective and rapid as possible, while complying with the principle of proportionality and the right to be heard.
Amendment 746 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 2
Article 17 – paragraph 2
Amendment 748 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 2 – point a
Article 17 – paragraph 2 – point a
Amendment 749 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 2 – point b
Article 17 – paragraph 2 – point b
Amendment 751 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 2 – point c
Article 17 – paragraph 2 – point c
Amendment 752 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 2 – point d
Article 17 – paragraph 2 – point d
Amendment 754 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 2 – point e
Article 17 – paragraph 2 – point e
Amendment 757 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 2 – point g
Article 17 – paragraph 2 – point g
Amendment 765 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 3 – subparagraph 1
Article 17 – paragraph 3 – subparagraph 1
Amendment 766 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 3 – subparagraph 1 – point a
Article 17 – paragraph 3 – subparagraph 1 – point a
Amendment 768 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 3 – subparagraph 1 – point b
Article 17 – paragraph 3 – subparagraph 1 – point b
Amendment 770 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 3 – subparagraph 1 – point c
Article 17 – paragraph 3 – subparagraph 1 – point c
Amendment 771 #
2023/0085(COD)
Proposal for a directive
Article 17 – paragraph 3 – subparagraph 2
Article 17 – paragraph 3 – subparagraph 2
Amendment 786 #
2023/0085(COD)
Proposal for a directive
Article 20 – paragraph 3
Article 20 – paragraph 3
3. Member States shall provide the information referred to in paragraph 1 to the Commission on an biannual basis.
Amendment 795 #
2023/0085(COD)
Proposal for a directive
Article 21 – paragraph 3 – point b
Article 21 – paragraph 3 – point b
(b) facilitating transition towards toxic free environment by considering introducing, on the basis of an impact assessment, a prohibition of environmental claims for products containing hazardous substances except where their use is considered essential for the society in line with the criteria to be developed by the Commisssafe and improves the sustainability of the product, in compliance with the relevant Union and national legislations;
Amendment 816 #
2023/0085(COD)
Proposal for a directive
Article 25 – paragraph 1 – subparagraph 2
Article 25 – paragraph 1 – subparagraph 2
They shall apply those measures from [OP please insert the date = 2436 months after the date of entry into force of this Directive].
Amendment 69 #
2023/0042(COD)
Proposal for a regulation
Recital 7
Recital 7
(7) The REPowerEU Communication13 outlined a plan to make the Union independent from Russian fossil fuels well before the end of this decade. The Communication highlights the importance, among others, of further increasing the efficiency and reducing fossil consumption in the transport sector, where electrification can be combined with the use of fossil-free renewable fuels, including hydrogen to replace fossil fuels. __________________ 13 Communication from the Commission to the European Parliament, the European Council, the Council, the European Economic and Social Committee and the Committee of the Regions, REPowerEU Plan, COM(2022)230 final of 18.5.2022.
Amendment 74 #
2023/0042(COD)
Proposal for a regulation
Recital 8
Recital 8
(8) In order to contribute to the reduction in net greenhouse gas emissions of at least 55 % by 2030 compared to 1990 and in conformity with the energy efficiency first principle, it is necessary to strengthenassess the reduction requirements set out in Regulation (EU) 2019/1242 for heavy-duty vehicles, by an intensive use of carbon neutral fuels. A clear pathway also needs to be set for further reductions beyond 2030 to contribute to achieving the climate neutrality objective by 2050.
Amendment 77 #
2023/0042(COD)
Proposal for a regulation
Recital 8 a (new)
Recital 8 a (new)
(8a) Strengthening CO2 emission reduction requirements for heavy-duty vehicles and rolling-out the necessary recharging and refuelling infrastructure will play a key role in reducing the emissions of the entire heavy-duty vehicles fleet to zero as soon as possible and by 2050 at the very latest, but it should also be complemented by other initiatives aiming at accelerating a modal shift from road to rail and increasing rail freight.
Amendment 82 #
2023/0042(COD)
Proposal for a regulation
Recital 9
Recital 9
(9) The strengthened CO2 emission reduction requirements should incentivise an increasing share of zero-emission vehicles being deployed on the Union market whilst providing benefits to users and citizens in terms of air quality and energy savings, as well as ensuring that innovation in the automotive value chain can be maintained. Zero-emission vehicles currently include battery electric vehicles, fuel-cell and other hydrogen-powered vehicles, and technological innovations are continuing.
Amendment 84 #
2023/0042(COD)
Proposal for a regulation
Recital 9 a (new)
Recital 9 a (new)
(9a) Following consultation with stakeholders, at the latest one year after the entry into force of the regulation, the Commission should make a proposal for registering heavy-duty vehicles running exclusively on CO2 neutral fuels for compliance purposes in conformity with EU law and with the Union’s climate neutrality objective.
Amendment 92 #
2023/0042(COD)
Proposal for a regulation
Recital 10
Recital 10
(10) Against that background, new strengthened CO2 emission reduction targets should be set for new consistent with the avy-duty vehicles for the period 2030 onwards. Those targets should be set at a level that will deliver a strong signal to accelerateailability of enabling conditions, namely sufficiently dense network of alternative fuels infrastructure, with the aim of promoting the uptake of zero-emission vehicles on the Union market and to stimulate innovation in zero-emission technologies in a cost- efficient way.
Amendment 109 #
2023/0042(COD)
Proposal for a regulation
Recital 15
Recital 15
(15) Due to the heterogeneous structure of the total truck fleet, it is not possible to fully predict whether for all niche uses, technological developments will be quick enough to ensure that zero-emission tailpipe technology isand that vehicles powered by carbon neutral fuels are a viable choice. This may include uses such as long-haul heavy- duty vehicles in specific territorial morphology and meteorological circumstances, coaches and lorries for critical security and safety applications that cannot be fulfilled by zero-emission tailpipe technologies. The vehicles in question should constitute a limin adequated share of the entire heavy-duty vehicle fleet, on the basis of typology of missions. In view of such considerations, some margin in the 204028 target should be left to accommodate developments in technology yet to occur. For this reason it is vital to consider the full life-cycle CO2 emissions from heavy-duty vehicles at Union level. Therefore, at the latest one year after the entry into force of the Regulation, the Commission should evaluate the possibility of developing a common Union methodology for the assessment and the consistent data reporting of the full life-cycle CO2 emissions of heavy-duty vehicles placed on the Union market. Where appropriate, the Commission should adopt follow-up measures, including legislative proposals.
Amendment 123 #
2023/0042(COD)
Proposal for a regulation
Recital 17
Recital 17
(17) With the stricter Union fleet-wide targets from 2030 onwards, manufacturers will have to deploy significantly more zero-emission vehicles on the Union market. In that context, the incentive mechanism for zero- and low-emission vehicles (‘ZLEV’) would no longer serve its original purpose and would risk undermining the effectiveness of Regulation (EU) 2019/1242. The ZLEV incentive mechanism should therefore be removed as of 20340.
Amendment 139 #
2023/0042(COD)
Proposal for a regulation
Recital 21 – paragraph 5
Recital 21 – paragraph 5
Vocational vehicles, such as garbage trucks, tippers or concrete mixers, should continue to be exempted from the calculation of average specific CO2 emissions of manufacturers. On the other hand, zero-and-Low emission vocational vehicles could be used for the purpose of this Regulation and for the purpose of determining manufacturer's compliance with its specific CO2 emissions targets.
Amendment 143 #
2023/0042(COD)
Proposal for a regulation
Recital 23
Recital 23
Amendment 161 #
2023/0042(COD)
Proposal for a regulation
Recital 28
Recital 28
(28) The zero- and low-emission factor should last be applied for the reporting period of the year 20239, because it is no longer considered necessary after that time as an incein order to contivnue to promote the market entrance of zero-emission vehicles in HDV sector.
Amendment 173 #
2023/0042(COD)
Proposal for a regulation
Recital 29
Recital 29
Amendment 175 #
2023/0042(COD)
Proposal for a regulation
Recital 30
Recital 30
(30) Furthermore, in order to strengthen the development of new zero-emission technologies powered by carbon neutral fuels in specialized small- and medium- sized companies, it should also be possible to transfer zero-emission and vehicles powered by carbon neutral fuels between non-connected entities.
Amendment 188 #
2023/0042(COD)
Proposal for a regulation
Recital 42 a (new)
Recital 42 a (new)
(42a) This regulation aims to accelerate the transition towards carbon neutral mobility in a technologically neutral way. As a complement to the efforts towards an increasing availability of zero emission vehicles, a mechanism based on a carbon correction factor is introduced to duly account the contribution from the use of sustainable renewable transport fuels including biofuels, biomass fuels as well as RFNBOs when assessing the compliance with CO2 emissions reductions of newly registered heavy-duty vehicles.
Amendment 194 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 2 – point a
Article 1 – paragraph 1 – point 2 – point a
Regulation (EU) 2019/1242
Article 2 – paragraph 1 – subparagraph 1 – point b
Article 2 – paragraph 1 – subparagraph 1 – point b
(b) N1, which do not fall under Regulation (EU) 2019/631, N22 with a technically permissible maximum laden mass above 5 tons and N3;
Amendment 197 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 2 – point a
Article 1 – paragraph 1 – point 2 – point a
Regulation (EU) 2019/1242
Article 2 – paragraph 1 – subparagraph 1 – point c
Article 2 – paragraph 1 – subparagraph 1 – point c
(c) O3 and O4. It shall also apply, for the purposes of this Regulation, to zero-and-low emission vocational vehicles.
Amendment 209 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 3 – point g
Article 1 – paragraph 1 – point 3 – point g
Regulation (EU) 2019/1242
Article 3 – paragraph 3 – point g – point 11
Article 3 – paragraph 3 – point g – point 11
(a) a heavy-duty motor vehicle with not more than 51 g/(t∙km) or 51 g/(p∙km) of CO2 emissions as determined in accordance with Article 9 of Regulation (EU) 2017/2400 and vehicles powered by renewable fuels;
Amendment 229 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 3 – point i
Article 1 – paragraph 1 – point 3 – point i
Regulation (EU) 2019/1242
Article 3 – paragraph 1 – point 23 a (new)
Article 3 – paragraph 1 – point 23 a (new)
(23a) “CO2 Neutral Fuel” means a biofuel, biogas, biomass fuel, Renewable liquid and gaseous transport Fuel of Non Biological Origin (RFNBO) or a Recycled Carbon Fuel (RCF), as defined by Directive 2018/2001, where the emissions of the fuel in use e(u) can be taken to be net zero, meaning that the CO2 equivalent of the carbon incorporated in the chemical composition of the fuel in use e(u) is of biogenic origin, or has been avoided being emitted as CO2 into the atmosphere or has avoided its existing fate;
Amendment 235 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 3 – point i
Article 1 – paragraph 1 – point 3 – point i
Regulation (EU) 2019/1242
Article 3 – paragraph 1 – point 23 b (new)
Article 3 – paragraph 1 – point 23 b (new)
(23b) ‘CO2 Neutral Fuel’ means a renewable and/or synthetic fuel as defined by Directive 2018/2001 including biofuel, biogas, biomass fuel, Renewable liquid and gaseous transport Fuel of Non Biological Origin – RFNBO or Recycled Carbon Fuel – RCF, where the emissions of the fuel in use (eu) can be taken to be net zero, meaning that the CO2 equivalent of the carbon incorporated in the chemical composition of the fuel in use eu is of biogenic origin and/or has been avoided being emitted as CO2 into the atmosphere or has been captured from ambient air or has avoided its existing fate. Other renewable and/or synthetic fuels not listed in Directive 2018/2001 can fulfil this definition provided that they meet the above criteria and the sustainability criteria of said Directive and associated delegated acts. A mixture of two or more CO2 Neutral Fuels is considered a CO2 Neutral Fuel;
Amendment 245 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 3 – point i
Article 1 – paragraph 1 – point 3 – point i
Regulation (EU) 2019/1242
Article 3 – paragraph 1 – point 23 c (new)
Article 3 – paragraph 1 – point 23 c (new)
(23c) ‘Carbon Correction Factor (CCF)’ means a factor which applies a correction to the CO2 tailpipe emissions of vehicles for compliance assessment, to reflect the GHG emission intensity and the share of CO2 Neutral Fuels, as defined in paragraph 79 of this article;
Amendment 250 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 3 – point j
Article 1 – paragraph 1 – point 3 – point j
Regulation (EU) 2019/1242
Article 3 – paragraph 2
Article 3 – paragraph 2
Amendment 258 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EU) 2019/1242
Article 3a – paragraph 1 – point (b)
Article 3a – paragraph 1 – point (b)
(b) for all vehicle sub-groups for the reporting periods of the years 2030 to 2034 by 4530 %, including vehicles 100% powered by carbon neutral fuels.
Amendment 273 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EU) 2019/1242
Article 3a – paragraph 1 – point c
Article 3a – paragraph 1 – point c
(c) for all vehicle sub-groups for the reporting periods of the years 2035 to 2039 by 65 %,45%, including vehicles 100% powered by carbon neutral fuels.
Amendment 290 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EU) 2019/1242
Article 3a – paragraph 1 – point d
Article 3a – paragraph 1 – point d
(d) for all vehicle sub-groups for the reporting periods of the years 2040 onwards by 970%, including vehicles 100% powered by carbon neutral fuels.
Amendment 326 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EU) 2019/1242
Article 3b – paragraph 1
Article 3b – paragraph 1
1. For vehicles referred to in point 4.2 of Annex I, manufacturers shall comply with the minimum shares of zero-emission vehicles in their fleet of new heavy-duty vehicles as laid down in point 4.3 of Annex I. For new urban buses the share of zero- emissions vehicles shall be 80% as from the reporting period of the year 2030 and 100% as from the reporting period of the year 20305.;
Amendment 336 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
2. Member States may decide to exclude from the obligation under this Article a limited share of the urban buses registered in each reporting period, confirming that the purpose of the vehicle cannot be equally served by a zero-emission vehicle or vehicles powered by carbon neutral fuels and it is thus in the public interest to register a non- zero emission vehicle to fulfil that purpose, due to socio-economic cost-benefit in view of specific territorial morphology or meteorological circumstances.
Amendment 364 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 5
Article 1 – paragraph 1 – point 5
Regulation (EU) 2019/1242
Article 4 – paragraph 5 – point a
Article 4 – paragraph 5 – point a
(a) the data reported for the manufacturer’s new heavy-duty vehicles registered in the preceding reporting period including zero-and-low emission vocational vehicles; and;
Amendment 368 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 5 a (new)
Article 1 – paragraph 1 – point 5 a (new)
Regulation (EU) 2019/1242
Article 4 – paragraph 1 – point b a (new)
Article 4 – paragraph 1 – point b a (new)
(5a) Following consultation with stakeholders, at the latest one year after the entry into force of the regulation, the Commission shall make a proposal for registering heavy-duty vehicles running exclusively on CO2 neutral fuels for compliance purposes in conformity with EU law and with the Union’s climate neutrality objective;
Amendment 382 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 6 – point a
Article 1 – paragraph 1 – point 6 – point a
Regulation (EU) 2019/1242
Article 5 – paragraph 1 – subparagraph 1
Article 5 – paragraph 1 – subparagraph 1
Starting from 1 July 2020 and for each subsequent reporting period until the reporting period of the year 2029, the Commission shall determine for each manufacturer the zero- and low-emission factor for the preceding reporting period.
Amendment 392 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 6 – point c
Article 1 – paragraph 1 – point 6 – point c
Regulation (EU) 2019/1242
Article 5 – paragraph 4
Article 5 – paragraph 4
4. The zero-emission and low- emission factor shall reduce the average specific CO2 emissions of a manufacturer by a maximum of 3 10%. The contribution to that factor of the zero-emission vehicles of category N, other than those in vehicles sub-groups 4-UD, 4-RD, 4-LH, 5-RD, 5- LH, 9-RD, 9-LH, 10-RD, 10-LH, shall reduce the average specific CO2 emissions of a manufacturer by a maximum of 1,5 3%.;
Amendment 395 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 8
Article 1 – paragraph 1 – point 8
Regulation (EU) 2019/1242
Article 6a – paragraph 1 – point b
Article 6a – paragraph 1 – point b
Amendment 399 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 8
Article 1 – paragraph 1 – point 8
Regulation (EU) 2019/1242
Article 6a – paragraph 1 – subparagraph 1– point c
Article 6a – paragraph 1 – subparagraph 1– point c
(c) for transfers of zero-emission vehicles and vehicles powered by carbon neutral fuels between manufacturers not belonging to a group of connected manufacturers: the number of zero- emissions vehicles transferred to a manufacturer must not exceed 5 % of all its new heavy-duty vehicles registered in a given reporting period.
Amendment 412 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 9 – point d
Article 1 – paragraph 1 – point 9 – point d
Regulation (EU) 2019/1242
Article 7 – paragraph 1 – subparagraph 4
Article 7 – paragraph 1 – subparagraph 4
Emission credits and emission debts acquired in the reporting periods of the years 2025 to 2039 shall, where applicable, be carried over from one reporting period to the next reporting period. However, any remaining emission debts shall be cleared in the reporting periods of the year 2029, 2034 and 2039.;
Amendment 421 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 11 – point c
Article 1 – paragraph 1 – point 11 – point c
Regulation (EU) 2019/1242
Article 8 – paragraph 2 – point a
Article 8 – paragraph 2 – point a
(a) where, in any of the reporting periods of the years 2025 to 2028, 2030 to 2033, 2035 to 2038 the sum of the emission debts reduced by the sum of the emission credits exceeds the emission debt limit referred to in Article 7(1), third subparagraph;
Amendment 428 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 11 – point c
Article 1 – paragraph 1 – point 11 – point c
Regulation (EU) 2019/1242
Article 8 – paragraph 2 – point b
Article 8 – paragraph 2 – point b
Amendment 435 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 16
Article 1 – paragraph 1 – point 16
Regulation (EU) 2019/1242
Article 13 f – paragraph 4
Article 13 f – paragraph 4
4. The amounts of the administrative fines shall be considered as revenue for the general budget of the Union.’Social Climate Fund’s specific budgetary line for ‘support for goods and workers in the automotive sector’.
Amendment 450 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 18
Article 1 – paragraph 1 – point 18
Regulation (EU) 2019/1242
Article 15
Article 15
The Commission shall, in 20287, review the effectiveness and impact of this Regulation and submit a report to the European Parliament and to the Council with the result of the review. ’ In this report, the Commission shall assess in particular, but not limited to, the following elements: (a) registrations of zero-emission heavy- duty vehicles in Member States; (b) the deployment of charging and refuelling infrastructure suitable for heavy-duty vehicles in Member States along the entire European road and motorway network [REFERENCE TO XXX AFIR]; (c) the implementation of road user charges differentiated by CO2 emissions in Member States [REFERENCE TO XXX Eurovignette]; (d) the level of the average price of allowances under the new emissions trading system covering road transport [REFERENCE TO XXX ETS2]; (e) measures to support haulage companies in renewing their fleets of vehicles; (f) Based on the results of the above assessment and on the evidence of lack of any of the above conditions, the Commission should consider making a proposal to review the CO2 targets and waive the excess CO2 emissions premiums as set out in Article 8 of this Regulation.
Amendment 458 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 18
Article 1 – paragraph 1 – point 18
Regulation (EU) 2019/1242
Article 15 – paragraph 1
Article 15 – paragraph 1
The Commission shall, in 20287, review the effectiveness and impact of this Regulation and submit a report to the European Parliament and to the Council with the result of the review.
Amendment 463 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 18
Article 1 – paragraph 1 – point 18
Regulation (EU) 2019/1242
Article 15 – paragraph 2
Article 15 – paragraph 2
The report shall, where appropriate, be accompanied by a proposal for amending this Regulation. The Commission shall report to the European Parliament and to the Council on the state of the enabling conditions for the market adoption of zero-emission heavy-duty vehicles in the Union. In this report, the Commission shall assess in particular, but not limited to, the following elements: (a) registrations of zero-emission heavy- duty vehicles in Member States; (b) the deployment of charging and refuelling infrastructure suitable for heavy-duty vehicles in Member States [REFERENCE TO XXX AFIR]; (c) the implementation of road user charges differentiated by CO2 emissions in Member States [REFERENCE TO XXX Eurovignette]; (d) the level of the average price of allowances under the new the emissions trading system covering road transport [REFERENCE TO XXX ETS2]; (e) other measures that support the uptake of zero-emission heavy-duty vehicles. Based on the results of the above assessment and on the evidence of lack of any of the above of conditions, the CO2 targets should be reviewed and excess CO2 emissions premiums according to Art. 8 of this Regulation be waived.
Amendment 469 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 18 a (new)
Article 1 – paragraph 1 – point 18 a (new)
Regulation (EU) 2019/1242
Article 15 – paragraph 2 a (new)
Article 15 – paragraph 2 a (new)
(18a) At the latest one year after the entry into force of the regulation, the Commission shall evaluate the possibility of developing a common Union methodology for the assessment, and the consistent data reporting, of the full life- cycle CO2 emissions of new heavy-duty vehicles placed on the Union market. The Commission shall transmit that evaluation to the European Parliament and to the Council and complement it, where appropriate, by follow-up measures such as legislative proposals.
Amendment 471 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 19 – point a
Article 1 – paragraph 1 – point 19 – point a
Regulation (EU) 2019/1242
Article 17 – paragraph 2 – subparagraph 1
Article 17 – paragraph 2 – subparagraph 1
The power to adopt delegated acts referred to in Article 3b, Article 4 bis, Article 11(2), Article 13(4) second subparagraph, Article 13c(3), Article 13d(2), Article 13e(4), Article 13f(2) and Article 14(1) shall be conferred on the Commission for a period of five years from [OP, please insert the date of entry into force of this Regulation].;
Amendment 473 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 19 – point b
Article 1 – paragraph 1 – point 19 – point b
Regulation (EU) 2019/1242
Article 17 – paragraph 3 – subparagraph 1
Article 17 – paragraph 3 – subparagraph 1
The delegation of power referred to in Article 4bis, Article 11(2), Article 13(4) second subparagraph, Article 13c(3), Article 13d(2), Article 13e(4), Article 13f(2) and Article 14(1) may be revoked at any time by the European Parliament or by the Council.;
Amendment 475 #
2023/0042(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 19 – point c
Article 1 – paragraph 1 – point 19 – point c
Regulation (EU) 2019/1242
Article 17 – paragraph 6 – point c
Article 17 – paragraph 6 – point c
(c) in paragraph (6), “ Article 4 (bis), Article 11(2), the second subparagraph of Article 13(4) and Article 14(1)” is replaced by the following: “Article 11(2), Article 13(4) second subparagraph, Article 13c(3), Article 13d(2), Article 13f(2) and Article 14(1)”;
Amendment 484 #
2023/0042(COD)
Proposal for a regulation
Annex I – point 2 – point 2.3 – point 2.3.2 – paragraph 1
Annex I – point 2 – point 2.3 – point 2.3.2 – paragraph 1
Regulation (EU) 2019/1242
Annex I – point 2 – point 2.3
Annex I – point 2 – point 2.3
Reporting periods from 2025 to 2029onwards
Amendment 494 #
2023/0042(COD)
Proposal for a regulation
Annex I – point 2 – point 2.3 – point 2.3.3
Annex I – point 2 – point 2.3 – point 2.3.3
Regulation (EU) 2019/1242
Annex I – point 2 – point 2.3
Annex I – point 2 – point 2.3
Amendment 498 #
2023/0042(COD)
Proposal for a regulation
Annex I – point 2 – point 2.4 – paragraph 5 – subparagraph 3
Annex I – point 2 – point 2.4 – paragraph 5 – subparagraph 3
Regulation (EU) 2019/1242
Annex I – point 2 – point 2.4
Annex I – point 2 – point 2.4
Vsg is the number of new heavy-duty vehicles of the manufacturer, including zero-and-low vocational vehicles in a subgroup sg;
Amendment 500 #
2023/0042(COD)
Proposal for a regulation
Annex I – point 2 – point 2.4 – paragraph 5 – subparagraph 4
Annex I – point 2 – point 2.4 – paragraph 5 – subparagraph 4
Regulation (EU) 2019/1242
Annex I – point 2 – point 2.4
Annex I – point 2 – point 2.4
V is the number of new heavy-duty vehicles of the manufacturer including zero-and-low vocational vehicles.
Amendment 526 #
2023/0042(COD)
Proposal for a regulation
Annex I – paragraph 2 – subparagraph 2.1
Annex I – paragraph 2 – subparagraph 2.1
2.1. Calculation of the specific CO2 emissions of a new heavy-duty vehicle The specific emissions in g/km of a new heavy-duty vehicle v attributed to a sub-group sg or of its primary vehicle shall be calculated in accordance with the following formula: 𝐶𝑂2𝑣 = ∑𝑊 𝑚𝑝 𝑚𝑝 𝑠𝑔,𝑚𝑝 × 𝐶𝑂2𝑣,𝑚𝑝 × (𝟏 ― 𝐂𝐂𝐅𝐢) 𝐶𝑂2p𝑣 = ∑𝑊 𝑚𝑝 𝑚𝑝 𝑠𝑔,𝑚𝑝 × 𝐶𝑂2p𝑣,𝑚𝑝 × (𝟏 ― 𝐂𝐂𝐅𝐢) Where, ∑𝑚𝑝 is the sum over all mission profiles mp listed in Table 2; sg is the sub-group to which the new heavy-duty vehicle v has been attributed according to Section 1 of this Annex; Wsg,mp, is the mission profile weight specified in points 2.1.1 to 2.1.3; CO2v,mp is the CO2 emissions in g/km of the new heavy-duty vehicle v determined for a mission profile mp, reported in accordance with Articles 13a and 13b and normalised pursuant to Annex III; CO2pv,mp is the CO2 emissions in g/km of the primary vehicle of the new heavy-duty vehicle v, determined for a mission profile mp, reported in accordance with Articles 13a and 13b; CCFi is the Carbon Correction Factor for the fuel or blend of fuels in use i, as defined in article 3 point (25) and calculated according to paragraph 7 of this Annex. For zero-emissions motor vehicles the values of CO2v,mp and CO2pv,mp shall be set to 0.
Amendment 532 #
2023/0042(COD)
Amendment 547 #
2023/0042(COD)
Proposal for a regulation
Paragraph 4 – subparagraph 4.1. – table 4.2.
Paragraph 4 – subparagraph 4.1. – table 4.2.
4.2. Vehicle sub-groups included in the calculation of average specific CO2 emissions and specific emissions targets of manufacturers X = 2025 X= NO X = MCO2 X= MZE vehicle sub- sub-groups of sub-groups of sub-groups of transport of persons groups, subject transport of transport of vehicles, subject to zero-emissions to CO2 goods vehicles, persons vehicle targets according to Article emissions subject to CO2 vehicles, 3b targets emissions subject to CO2 according to targets emissions Article 3a according to targets paragraph 1 (a) Article 3a according to paragraphs Article 3a 1(b), 1(c) and paragraphs 1(d) and 1(b), 1(c) and paragraph 3 1(d) 4-UD, 4-RD, All vehicle sub- 32-C2, 32-C3, 31-LF, 31-L1, 31-L2, 31-DD, 33-LF, 33-L1, 4-LH, 5-RD, 5- groups referred 32-DD, 34-C2, 33-L1, 33-L2, 33-DD, 35-FE, 39-FE LH, 9-RD, 9- to in points 34-C3, 34-DD, LH, 10-RD, 10- 1.1.1 and 1.1.3. 31-L2, 33-L2 LH
Amendment 560 #
2023/0042(COD)
Proposal for a regulation
ANNEX I – paragraph 4 – subparagraph 4.3. – table 4.3.1.
ANNEX I – paragraph 4 – subparagraph 4.3. – table 4.3.1.
4.3.1. The following CO2 emissions reduction targets rfsg and rfpsg pursuant to Article 3a shall apply to vehicles in the sub-group sg for different reporting periods: CO2 reduction targets rfsg and rfpsg groups sg Reporting period of the years Sub- 2025 – 2029 2030 – 2034 2035 – 2039 As from 2040 Medium lorries 53, 54 0 4315% 6450% 970% Heavy lorries > 7,4t 1s, 1, 2, 3 0 430% 6450% 970% Heavy lorries > 16 t 4-UD, 4-RD, 15% with 4x2 and 6x4 axle 4-LH, 5-RD, configurations 5-LH, 9-RD, 430% 6450% 970% 9-LH, 10-RD, 10-LH Heavy lorries > 16 t 11, 12, 16 0 with special axle 430% 6450% 970% configurations Coaches (rfsg) 32-C2, 32- 0 C3, 32-DD, 4315% 6450% 970% 34-C2, 34- C3, 34-DD Primary vehicles of 32-C2, 32- 0 coaches (rfpsg) C3, 32-DD, 43 15% 6450% 970% 34-C2, 34- C3, 34-DD Trailers 0 7,5% 7,5% 7,5% Semi-trailers 0 15% 15% 15%
Amendment 575 #
2023/0042(COD)
Proposal for a regulation
Annex I – paragraph 4 – subparagraph 4.3 – table 4.3.2
Annex I – paragraph 4 – subparagraph 4.3 – table 4.3.2
4.3.2. The following zero-emission vehicle targets zevMsg pursuant to Article 3b are applicable to vehicles in the sub-group sg for different reporting periods: Zero-emission vehicle mandates zevMsg Sub-groups Zero-emission vehicle mandates Reporting period of the years sg zevMsg before 2030 2030 – 2034 2035 – 2039 As from 2040 Urban heavy 31-LF, 31-L1, 31- 0 1080% 100% 100% buses DD, 33-LF, 33- L1, 33-DD, 35- FE, 39-FE, 31-L2, 33-L2
Amendment 585 #
2023/0042(COD)
Proposal for a regulation
Annex I – paragraph 6 a (new)
Annex I – paragraph 6 a (new)
Amendment 69 #
2023/0033(COD)
Proposal for a directive
Recital 8 a (new)
Recital 8 a (new)
(8a) Lead and its inorganic compounds are an indispensable component in the construction and restoration of musical instruments, in particular for pipe organs, recognised by UNESCO as Imtangible Cultural Heritage of Humanity. It can therefore be expected that the musical instrument production and restoration sector will have difficulties in conforming, in the short term, to the biological limit value of 15 µg/100ml blood, together with an occupational exposure limit value of 0.03 mg/m³ expressed as a time-weighted average of eight hours. A five-year transitional period should therefore be introduced for that sector, during which a biological limit value of 40 µg/100ml blood and the occupational exposure limit value of 0.05 mg/m³ expressed as a time- weighted average of eight hours should apply.
Amendment 117 #
2023/0033(COD)
Proposal for a directive
Recital 16 a (new)
Recital 16 a (new)
(16a) In implementing this Directive, Member States should avoid imposing financial, administrative and legal constraints in a way which would discourage the establishment and development of small and medium-sized enterprises (SMEs) and micro-enterprises. In this connection, the Member States and the competent bodies of the European Union are called on to provide incentives, guidance and advice to SMEs and micro- enterprises to facilitate conformity with this directive. Against this backdrop, the social partners are encouraged to conclude agreements, issue guidelines and take other joint actions that can identify and advance best practices.
Amendment 137 #
2023/0033(COD)
Proposal for a directive
Article 2 – paragraph -1 – point 4 (new)
Article 2 – paragraph -1 – point 4 (new)
Directive 2004/37/EC
Article 5 – paragraph 4 a (new)
Article 5 – paragraph 4 a (new)
(4) in Article 5, the following paragraph 4a is inserted: “4a. In the case of activities involving exposure to more than one carcinogenic, mutagenic or reprotoxic substance acting by the same mode of action or at the same target cell or tissue, the risk shall be assessed on the basis of the risk presented by all such substances in combination.”
Amendment 161 #
2023/0033(COD)
Proposal for a directive
Article 2 – paragraph -1 (new)
Article 2 – paragraph -1 (new)
Directive 2004/37/EC
Article 18 a – paragraph 7 d (new)
Article 18 a – paragraph 7 d (new)
-1. By 31 December 2028, the Commission shall, after consulting the Advisory Committee on Safety and Health at Work, submit a report to the European Parliament and to the Council assessing whether the area of construction and restoration of musical instruments should fall within the scope of this directive. In that report, the Commission shall also list the appropriate limit values applicable to that sector.
Amendment 171 #
2023/0033(COD)
Proposal for a directive
Annex II – paragraph 1 – point -1 (new)
Annex II – paragraph 1 – point -1 (new)
Directive 2004/37/EC
Annex I – point 8 a (new)
Annex I – point 8 a (new)
(-1a) in Annex I, the following point is added: “8 a. Work involving exposure to hazardous medicinal products which are medicinal products that contain one or more substances that meet the criteria for classification as carcinogenic (category 1A or 1B), mutagenic (category 1A or 1B) or toxic for reproduction (category 1A or 1B) in accordance with Regulation (EC) No 1272/2008.”
Amendment 178 #
2023/0033(COD)
Proposal for a directive
Annex II – point 1
Annex II – point 1
Directive 2004/37/EC
Annex III – point A – row 31
Annex III – point A – row 31
(1) in Annex III, point A, the row related to inorganic lead and its compounds is replaced by the following: Limit values EC No CAS 8 hours (3) Short-term (4) Transitional Name of agent (1) No (2) Notati 3 3 measures mg/m3 Ppm f/ml mg/m3 ppm f/ml on (5) (6) (7) Inorganic lead and 0.03 its compounds Until 5 years its compounds after entry into force a BLV of 200 µg Pb/L applies. Sites engaged in the processing of lead ores and concentrates (’Primary Lead Producers‘) receive an extra transition time of 3 years to reach the BLV of 150 µg Pb/L blood (1) EC No, i.e. Einecs, ELINCS or NLP, is the official number of the substance within the European Union, as defined in Section 1.1.1.2 in Annex VI, Part 1, to Regulation (EC) No 1272/2008. (2) CAS No: Chemical Abstract Service Registry Number. (3) Measured or calculated in relation to a reference period of eight hours time-weighted average (TWA) (4) Short-term exposure limit (STEL). A limit value above which exposure should not occur and which is related to a 15-minute period unless otherwise specified. (5) mg/m3 = milligrams per cubic metre of air at 20 °C and 101,3 kPa (760 mm mercury pressure) (6) ppm = parts per million by volume in air (ml/m3). (7) f/ml = fibres per millilitre.’;
Amendment 179 #
2023/0033(COD)
Proposal for a directive
Annex II – point 1
Annex II – point 1
Directive 2004/37/EC
Annex III – point A - row 31
Annex III – point A - row 31
(1) in Annex III, point A, the row related to inorganic lead and its compounds is replaced by the following: Limit values EC No CAS 8 hours (3) Short-term (4) Transitional Name of agent (1) No (2) Notati 3 3 measures mg/m3 Ppm f/ml mg/m3 ppm f/ml on (5) (6) (7) Inorganic lead and 0.03 its compounds Limit value of its compounds 0.05 mg/m³ for the musical instrument construction and restoration sector until 31 December 20 28, provided that the Commission concludes in its report submitted pursuant to Article 18(7d) that the limit value shall apply to that sector. (1) EC No, i.e. Einecs, ELINCS or NLP, is the official number of the substance within the European Union, as defined in Section 1.1.1.2 in Annex VI, Part 1, to Regulation (EC) No 1272/2008. (2) CAS No: Chemical Abstract Service Registry Number. (3) Measured or calculated in relation to a reference period of eight hours time-weighted average (TWA). (4) Short-term exposure limit (STEL). A limit value above which exposure should not occur and which is related to a 15-minute period unless otherwise specified. (5) mg/m3 = milligrams per cubic metre of air at 20 °C and 101,3 kPa (760 mm mercury pressure) (6) ppm = parts per million by volume in air (ml/m3). (7) f/ml = fibres per millilitre.’;
Amendment 180 #
2023/0033(COD)
Proposal for a directive
Annex II – point 1
Annex II – point 1
Directive 2004/37/EC
Annex III – point A – row 31
Annex III – point A – row 31
(1) in Annex III, point A, the row related to inorganic lead and its compounds is replaced by the following: Limit values EC No CAS 8 hours (3) Short-term (4) Transitional Name of agent (1) No (2) Notati 3 3 measures mg/m3 Ppm f/ml mg/m3 ppm f/ml on (5) (6) (7) Inorganic lead and 0.035 its compounds (1) EC No, i.e. Einecs, ELINCS or NLP, is the official number of the substance within the European Union, as defined in Section 1.1.1.2 in Annex VI, Part 1, to Regulation (EC) No 1272/2008. (2) CAS No: Chemical Abstract Service Registry Number. (3) Measured or calculated in relation to a reference period of eight hours time-weighted average (TWA) (4) Short-term exposure limit (STEL). A limit value above which exposure should not occur and which is related to a 15-minute period unless otherwise specified. (5) mg/m3 = milligrams per cubic metre of air at 20 °C and 101,3 kPa (760 mm mercury pressure) (6) ppm = parts per million by volume in air (ml/m3). (7) f/ml = fibres per millilitre.’;
Amendment 186 #
2023/0033(COD)
Proposal for a directive
Annex II – paragraph 1 – point 2
Annex II – paragraph 1 – point 2
Limit value of 40 µg/100ml of blood for the musical instrument construction and restoration sector until 31 December 2028, provided that the Commission concludes in its report submitted pursuant to Article 18(7d) that the limit value applies to this sector. (This amendment applies throughout the text. Adopting it will necessitate corresponding changes throughout.)
Amendment 70 #
2022/0432(COD)
Proposal for a regulation
Recital 2
Recital 2
(2) From a toxicological point of view, substances with more than one constituent (‘multi-constituent substances’) are no different from mixtures composed of two or more substances. Iand in accordance with Article 13 of Regulation (EC) No 1907/2006 of the European Parliament and of the Council39, aimed to limit animal testing, data on multi-constituentsubstances is to be generated under the same conditions as data on any other substance with more than one costituent, while data on individual constituents of a substance is normally not to be generated, except where individual constituents are also substances registered on their own. Where data on individualthe substance with more than one constituents is not available, multi- constituent and where relevant data onindividual constituents is available, thesesubstances should be evaluated and classified following the same classification rules as mixtures, unless Annex I to Regulation (EC) No 1272/2008 provides for a specific provision for those multi-constituentsubstances. _________________ 39 Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).
Amendment 80 #
2022/0432(COD)
Proposal for a regulation
Recital 3
Recital 3
(3) It is normally not possible to sufficiently assess theFor the assessment of endocrine disrupting properties for human health and the environment and the persistent, bioaccumulative and mobile properties of a mixture or of a multi-constituent substance on the basis of data on that mixture or substance. The data for the individual substances of the mixture or for the individual constituents of the multi- constituent substance should therefore normally be used as the basis for hazard identification of those multi-constituent substances or mixtures. However, in certain cases, data on those multi- constituent substances themselves may also be relevant. This is the case in particular where that data demonstrates endocrine disrupting properties for human health and the environment, as well as persistent, bioaccumulative and mobile properties, or where it supports data on the individual constituents. Therefore, it is appropriate that data on multi-constituent substances are used in those casboth whole substance data and data for the individual constituents of the substance with more than one constituent, impurity or additive should be used as the basis for hazard classification of those substances.
Amendment 94 #
2022/0432(COD)
Proposal for a regulation
Recital 11
Recital 11
(11) Regulation (EC) No 1272/2008 only allows for the use of fold-out labels if the general rules for the application of labels cannot be met due to the shape or form of the packaging or its small size, whilst it does not provide for a minimum font size of labels that would ensure readability. As a result of advancements in labelling technologies, more flexibility should be given to suppliers by providing for a broader use of fold-out labels, while readability of labels should be ensured by layadding down minimum font size and formatting requirementsmore examples of label in the Guidance on Labelling and Packaging.
Amendment 124 #
2022/0432(COD)
Proposal for a regulation
Recital 37
Recital 37
Amendment 134 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 2 – point a
Article 1 – paragraph 1 – point 2 – point a
Regulation (EC) 1272/2008
Article 2 – point 7a
Article 2 – point 7a
Amendment 151 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EC) 1272/2008
Article 5 – paragraph 3
Article 5 – paragraph 3
A multi-constituent substance containing at least one constituent, in the form of an individual constituent, an identified impurity or an additive for which relevant information referred to in paragraph 1 is available, shall be examined in accordance with the criteria set out in this paragraph, using the available information on those constituents as well as on the substance, unless Annex I lays down a specific provision. (This amendment applies throughout the text. Adopting it will necessitate corresponding changes throughout.) Or. en (Art 5 §3 (new))
Amendment 156 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EC) 1272/2008
Article 5 – paragraph 3 – subparagraph 2
Article 5 – paragraph 3 – subparagraph 2
For the evaluation of multi-constituentthese substances pursuant to Chapter 2 in relation to the ‘germ cell mutagenicity’, ‘carcinogenicity’, ‘reproductive toxicity’, ‘endocrine disrupting property for human health’ and ‘endocrine disrupting property for the environment’ hazard classesand ‘hazardous to the aquatic environment’ referred to in sections 3.5.3.1, 3.6.3.1, 3.7.3.1, 3.11.3, and 4.1. and 4.2.3.1. of Annex I, where relevant information referred to in paragraph 1 is not available on the substance itself, the manufacturer, importer or downstream user shall use the relevant available information referred to in paragraph 1 for each of the individual constituents in the substance. , impurities and additives in the substance. (This amendment applies throughout the text. Adopting it will necessitate corresponding changes throughout.) Or. en (Art 5 §3 (new))
Amendment 168 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EC) 1272/2008
Article 5 – paragraph 3 – subparagraph 5
Article 5 – paragraph 3 – subparagraph 5
For the evaluation of multi-constituentthese substances pursuant to Chapter 2 in relation to the ‘biodegradation, persistence, mobility and bioaccumulation’ properties within the ‘hazardous to the aquatic environment’ ‘persistent, bioaccumulative and toxic’, ‘very persistent and very bioaccumulative’, ‘persistent, mobile and toxic’ and ‘very persistent and very mobile’ hazard classes referred to in sections 4.1.2.8 4.1.2.9, 4.3.2.3.1, 4.3.2.3.2, 4.4.2.3.1 and 4.4.2.3.2 of Annex I3 and 4.4 of Annex I, where relevant information referred to in paragraph 1 is not available on the substance itself, the manufacturer, importer or downstream user shall use the relevant available information referred to in paragraph 1 for each of the individual constituents in the substance. , impurities or additives in the substance. (This amendment applies throughout the text. Adopting it will necessitate corresponding changes throughout.) Or. en (Art 5 §3 (new))
Amendment 170 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EC) 1272/2008
Article 5 – paragraph 3 – subparagraph 6
Article 5 – paragraph 3 – subparagraph 6
Amendment 176 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 4
Article 1 – paragraph 1 – point 4
Regulation (EC) 1272/2008
Article 5 – paragraph 3 – subparagraph 7
Article 5 – paragraph 3 – subparagraph 7
Amendment 216 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 11 – point a
Article 1 – paragraph 1 – point 11 – point a
Regulation (EC) 1272/2008
Article 29 – paragraph 1
Article 29 – paragraph 1
1. Where the packaging of a substance or a mixture is either in such a shape or form or is so small that it is impossible to meet the requirements laid down in Article 31 for a label or a fold-out label in the languages of the Member States in which the substance or mixture is placed on the market, the label elements set out in Article 17(1), shall be provided in accordance with sections 1.5.1.1. and 1.5.1.2. of Annex I.; (This amendment applies throughout the text. Adopting it will necessitate corresponding changes throughout.) Or. en (Article 29 paragraph 1)
Amendment 290 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 30
Article 1 – paragraph 1 – point 30
Regulation (EC) 1272/2008
Article 61 – paragraph 7
Article 61 – paragraph 7
Substances and mixtures which have been classified, labelled and packaged in accordance with Article 1(1), Article 4(10), Article 5, Article 6(3) and (4), Article 9(3) and (4), Article 25(6) and (9), Articles 29, 30 and 35, Article 40(1) and (2), Article 42(1), third sub-paragraph, Article 48, section 1.2.1. of Annex I, section 1.5.1.2 of Annex I, section 1.5.2.4.1 of Annex I, Parts 3 and 5 of Annex II, Part A, the first sub- paragraph of section 2.4, of Annex VIII, Part B, section 1, of Annex VIII, Part B, the third paragraph of section 3.1, of Annex VIII , Part B, section 3.6, of Annex VIII, Part B, the first row of Table 3 of Section 3.7, of Annex VIII, Part B, the first paragraph of Section 4.1, of Annex VIII, Part C, sections 1.2 and 1.4, of Annex VIII, and Part D, sections 1, 2 and 3, of Annex VIII as applicable on … [OP: please insert the date = the day before the entry into force of this Regulation] and which were placed on the market before [OP: please insert the date = the first day of the month following 1824 months after the date of entry into force of this Regulation ] are not required to be classified, labelled and packaged in accordance with this Regulation as amended by Regulation …/… of the European Parliament and of the Council* [OP: please complete the reference in the footnote – it should be the reference to this Regulation] until … [OP: please insert the date = the first day of the month following 42 months after the date of entry into force of this Regulation]. (This amendment applies throughout the text. Adopting it will necessitate corresponding changes throughout.) Or. en (Article 61 – paragraph 7))
Amendment 292 #
2022/0432(COD)
Proposal for a regulation
Article 1 – paragraph 1 – point 30
Article 1 – paragraph 1 – point 30
Regulation (EC) 1272/2008
Article 61 – paragraph 7 a (new)
Article 61 – paragraph 7 a (new)
Amendment 300 #
2022/0432(COD)
Proposal for a regulation
Annex I – Paragraph 1 – point 2
Annex I – Paragraph 1 – point 2
Regulation (EU) No 1272/2008
Annex I – Part 1 – Section 1.2.1.4. – Table 1.3
Annex I – Part 1 – Section 1.2.1.4. – Table 1.3
Capacity of the Dimensions of the Dimensions of each Minimum font-size package label (in pictogram (in millimetres) for the millimetres) information required by Article 17 Not exceeding 3 If possible, at least Not smaller than 8pt litres: 52x74 10x10 If possible, at least 16x16 Greater than 3 At least 74x105 At least 23x23 12pt litres but not exceeding 50 litres: Greater than 50 At least 105x148 At least 32x32 16pt litres but not exceeding 500 litres: Greater than 500 At least 148x210 At least 46x46 20pt’; litres:
Amendment 301 #
2022/0432(COD)
Proposal for a regulation
Annex I – paragraph 1 – point 3
Annex I – paragraph 1 – point 3
Regulation (EU) No 1272/2008
Annex I – Part 1 – Section 1.2.1.5
Annex I – Part 1 – Section 1.2.1.5
Amendment 63 #
2022/0426(COD)
Proposal for a directive
Recital 4
Recital 4
(4) In order to tackle the steady increase of the number and relevance of offences concerning trafficking in human beings committed for purposes other than sexual or labour exploitation, it is necessary to include forced marriage and, illegal adoption and surrogacy in the forms of exploitations explicitly listed in the Directive and to ensure that the Member States address within their national legal systems the widest range of forms of exploitation, insofar as these fulfil the constitutive elements of trafficking in human beings.
Amendment 135 #
2022/0426(COD)
Proposal for a directive
Article 1 – paragraph 1 – point 1
Article 1 – paragraph 1 – point 1
Directive 2011/36/EU
Article 2 – paragraph 3
Article 2 – paragraph 3
(1) in Article 2, paragraph 3, “or forced marriage, or illegal adoption, or surrogacy” is added at the end of the paragraph.
Amendment 150 #
2022/0402(CNS)
Proposal for a regulation
Article 17 a (new)
Article 17 a (new)
Article17a Condemnation of surrogacy It is stated that the practice of surrogacy, also known as gestation for others, is a universal crime because it seriously harms the dignity of the woman and the unborn child as it commodifies the body and life of the child, as already recognized by feminist movements.
Amendment 152 #
2022/0402(CNS)
Proposal for a regulation
Article 22 – paragraph 1
Article 22 – paragraph 1
1. The application of a provision of the law of any State specified by this Regulation may be refused only if such application is manifestly incompatible with the public policy (ordre public) of the forum, determined by the legislation on family law and constitutional relevance. However, the Member States remain free to ensure full respect for children's rights and to offer equivalent protection by means other than that of the recognition of judicial decisions, public deeds or European parental certificates.
Amendment 165 #
2022/0402(CNS)
Proposal for a regulation
Article 47 – paragraph 1
Article 47 – paragraph 1
Amendment 169 #
2022/0402(CNS)
Proposal for a regulation
Article 53 – paragraph 1
Article 53 – paragraph 1
1. The Certificate shall produce its effects in all Member States without any special procedure being required, respecting the limits of public order and after consulting with the competent authorities of the country whose recognition is sought.
Amendment 170 #
2022/0402(CNS)
Proposal for a regulation
Article 53 – paragraph 3
Article 53 – paragraph 3
3. TAfter a verification conducted by the competent authorities of the Member State in which recognition is requested, the Certificate shall constitute a valid document for the recording of parenthood in the relevant register of a Member State, without prejudice to point (i) of Article 3(2).
Amendment 229 #
2022/0396(COD)
Proposal for a regulation
Recital 7
Recital 7
(7) The Council underlined in its Conclusions of December 202038, that the revision of Directive 94/62/EC should update and establish more concrete, effective and easy to implement provisions to facilitate sustainable packaging in the internal market and minimise the complexity of packaging in order to foster economically feasible solutions, to improve the reusability and recyclability as well as minimise substances of concern in packaging materials, especially concerning food packaging materials, and to provide for labelling packaging in an easily understandable way to inform consumers about its recyclability and where its waste should be discarded to facilitate sorting and recycling. At the same time it noted that hygiene and food safety standards have to be respected. _________________ 38 https://data.consilium.europa.eu/doc/docu ment/ST-13852-2020-INIT/en/pdf
Amendment 232 #
2022/0396(COD)
Proposal for a regulation
Recital 8
Recital 8
(8) The European Parliament’s Resolution of 10 February 2021 on the New Circular Economy Action Plan39reiterated the objective of making all packaging reusable or recyclable in an economically viable way by 2030 and called on the Commission to present a legislative proposal including waste reduction measures and targets and ambitious essential requirements in the Packaging and Packaging Waste Directive to reduce excessive packaging, including in e-commerce, improve recyclability and minimise the complexity of packaging, increase recycled content, phase out hazardous and harmful substances, and promote re-use. In addition, it stressed that food safety or hygiene standards must not be compromised. _________________ 39 https://www.europarl.europa.eu/doceo/doc ument/TA-9-2021-0040_EN.html
Amendment 240 #
2022/0396(COD)
Proposal for a regulation
Recital 11
Recital 11
(11) An item, which is an integral part of a product and is necessary to contain, support or preserve that product throughout its lifetime and where all elements are intended to be used, consumed or disposed of together, should not be considered as being packaging given that its functionality is intrinsically linked to it being part of the product. However, in light of the disposal behaviour of consumers regarding tea and coffee bags as well as coffee or tea system single-serve units, which in practice are disposed of together with the product residue leading to the contamination of compostable and recycling streams, those specific items should be treated as packaging. This is in line with the objective to increase the separate collection of bio-waste, as required by Article 22 of Directive 2008/98/EC of the European Parliament and of the Council41. Furthermore, to ensure coherence regarding end-of-life financial and operational obligations, also all coffee or tea system single-serve units necessary to contain coffee or tea should be treated as packaging. _________________ 41 Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives (OJ L 312, 22.11.2008, p. 3).
Amendment 247 #
2022/0396(COD)
Proposal for a regulation
Recital 12
Recital 12
(12) In line with the waste hierarchy set out in Article 4(21) of Directive 2008/98/EC, and with the requirement set in paragraph 2 of Article 4 of the same Directive, which foresees that specific waste streams may depart from the hierarchy where this is in line with life- cycle thinking to deliver the best overall environmental outcome, the measures provided for under this Regulation aim at reducing the amount of packaging placed on the market in terms of its volume and weight, and preventing the generation of packaging waste, especially through packaging minimisation, avoiding packaging where it is not needed, and increased re-use of packagingand recycling of packaging while delivering the best environmental outcome. In addition, the measures aim at increasing the use of recycled content in packaging, especially in plastic packaging where the uptake of recycled content is very low, as well as higher recycling rates for all packaging and high quality of the resulting secondary raw materials while reducing other forms of recovery and final disposal.
Amendment 290 #
2022/0396(COD)
Proposal for a regulation
Recital 20
Recital 20
(20) Designing packaging with the objective of its recycling, once it becomes packaging waste, is one the most efficient measures to improve the packaging circularity and raise packaging recycling rates and the use of recycled content in packaging, while ensuring marketing and consumer acceptance. Packaging design for recycling criteria have been established for a number of packaging formats under voluntary industry schemes or by some Member States for the purpose of the modulation of extended producer responsibility fees. In order to prevent barriers to the internal market and provide industry with a level playing field, and with the objective to promote the sustainability of packaging ensuring marketing and consumer acceptance, it is important to set mandatory requirements regarding the recyclability of packaging, by harmonising the criteria and the methodology for assessing packaging recyclability based on a design for recycling methodology at the Union level. In order to meet the objective set out in the CEAP that, by 2030, all packaging should be recyclable or reusable, in an economically viable manner, packaging recyclability performance grades should be established based on design for recycling criteria for packaging categories as listed in Annex II. However, packaging should comply with them only as of 1 January 2030 in order to give sufficient time to the economic operators to adapt.
Amendment 299 #
2022/0396(COD)
Proposal for a regulation
Recital 21
Recital 21
(21) As design for recycling assessment in itself does not ensure that packaging is recycled in practice, it is necessary to establish a uniform methodology and criteria for assessing the recyclability of packaging in practice based on the state-of- the-art separate collection, sorting and recycling processes and infrastructure actually available in the Union. Related reporting from Member States and, where relevant, economic operators should support establishing the recyclability “at scale” thresholds and update, on this basis, the recyclability performance grades with respect to the specific packaging materials and categories. , preserving the added value conveyed to the final consumer with the packaging.
Amendment 306 #
2022/0396(COD)
Proposal for a regulation
Recital 22
Recital 22
(22) In order to establish harmonised rules on packaging design to ensure its recyclability while ensuring packaging performs all its functions and ensuring marketing and consumer acceptance, the power to adopt delegated acts should be delegated to the Commission to set out detailed criteria for packaging design for recycling per packaging materials and categories, as well as for the assessment of the packaging recyclability at scale including for categories of packaging not listed in this Regulation. In order to give economic operators and Member States sufficient time to collect and report the necessary data to establish the “at scale” recycling methodology, the manufacturers should ensure that packaging is recycled at scale as of 2035. That should ensure that packaging complies with the design for recycling criteria, and is also recycled in practice on the basis of the state of the art processes for separate collection, sorting and recycling.
Amendment 313 #
2022/0396(COD)
Proposal for a regulation
Recital 23
Recital 23
(23) In order to stimulate innovation in packaging, it is appropriate to allow that packaging, which presents innovative features resulting in significant improvement in the core function of packaging and has demonstrable environmental benefits, is given limited additional time of five years to comply withexempt from the recyclability requirements. The innovative features should be explained in the technical documentation accompanying the packaging.
Amendment 316 #
2022/0396(COD)
Proposal for a regulation
Recital 24
Recital 24
(24) In order to protect human and animal health and safety, due to the nature of the packaged products and the related requirements, it is appropriate that the recyclability requirements should not apply to immediate packaging as defined in Article 1 of Directive 2001/83/EC of the European Parliament and of the Council50and in Article 4(25) of Regulation (EU) 2019/6 of the European Parliament and of the Council51, which are in direct contact with the medicinal product, as well as contact sensitive plastic packaging of medical devices covered by Regulation (EU) 2017/745 of the European Parliament and of the Council52andof in vitro diagnostics medical devices covered by Regulation (EU) 2017/746 of the European Parliament and of the Council53.These exemptions should apply until 1 January 2035and contact sensitive packaging for foods covered by Regulation (EC) No 1935/2004 and Regulation (EU) No 609/2013. _________________ 50 Directive 2001/83/EC of the European Parliament and of the Council of 6 November 2001 on the Community code relating to medicinal products for human use (OJ L 311, 28.11.2001, p. 67). 51 Regulation (EU) 2019/6 of the European Parliament and of the Council of 11 December 2018 on veterinary medicinal products and repealing Directive 2001/82/EC (OJ L 4, 7.1.2019, p. 43). 52 Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices, amending Directive 2001/83/EC, Regulation (EC) No 178/2002 and Regulation (EC) No 1223/2009 and repealing Council Directives 90/385/EEC and 93/42/EEC (OJ L 117, 5.5.2017, p. 1). 53 Regulation (EU) 2017/746 of the European Parliament and of the Council of 5 April 2017 on in vitro diagnostic medical devices and repealing Directive 98/79/EC and Commission Decision 2010/227/EU (OJ L 117, 5.5.2017, p. 176).
Amendment 332 #
2022/0396(COD)
Proposal for a regulation
Recital 28
Recital 28
(28) In order to ensure a high level of human and animal health protection in accordance with requirements in Union legislation and to avoid any risk to the security of supply and to the safety of medicines and medical devices safety, it is appropriate to provide for the exclusion from the obligation of a minimum recycled content in plastic packaging for immediate packaging as defined in Article 1, point 23, of Directive 2001/83/EC and in Article 4, point 25, of Regulation (EU) 2019/6, as well as for contact sensitive plastic packaging of medical devices covered by Regulation (EU) 2017/745 and for contact sensitive packaging of in vitro diagnostics medical devices covered by Regulation (EU) 2017/746 and of contact sensitive packaging for foods covered by Regulation (EC) No 1935/2004 and Regulation (EU) No 609/2013. This exclusion should also apply to outer packaging of human and veterinary medicinal products as defined in Article 1, point 24, of Directive 2001/83/EC and in Article 4, point 26, of Regulation (EU) 2019/6 in cases where it has to comply with specific requirements to preserve the quality of the medicinal product.
Amendment 336 #
2022/0396(COD)
Proposal for a regulation
Recital 29
Recital 29
(29) In order to prevent barriers to the internal market and ensure the efficient implementation of the obligations, economic operators should ensure that the plastic part of each unit of packaging contains a certain minimum percentage of recycled content recovered from post- consumer plastic waste calculated as an average of the plastic packaging placed by a producer on the Union market. This provision should not apply to food or feed contact plastic packaging in those cases when the recycled content risks affecting human and animal health and/or compromising the organoleptic characteristics of products.
Amendment 368 #
2022/0396(COD)
Proposal for a regulation
Recital 35
Recital 35
(35) The bio-waste waste stream is oftencould be contaminated with conventional plastics and the material recycling streams are oftencould be contaminated with compostable plastics. This cross-contamination could leads to waste of traditional and compostable resources, lower quality secondary raw materials and should be prevented at source. As the proper disposal route for compostable plastic packaging is becoming increasingly confusing for consumers, it is justified andTherefore, it is necessary to lay down clear and common rules on the use of compostableand disposal of plastic packaging, mandating it only when its use brings a clear benefit for the environment or for human health. This is particularly the case when the use of compostable packaging helps collect or dispose of bio-wastelabeled as compostable, including the possibility to mandating applications. This is particularly the case when the use of compostable packaging helps collect or recycle of bio-waste. All plastic packaging labeled as compostable shouldn’t go into material recycling.
Amendment 373 #
2022/0396(COD)
Proposal for a regulation
Recital 36
Recital 36
(36) For limited packaging applications made of biodegradable plastic polymers, there is a demonstrable environmental benefit of using compostable packagingThere is a demonstrable environmental benefit of using compostable packaging for specific packaging applications (e.g., those strictly linked to food and food waste), which enters composting plants, including anaerobic digestion facilities under controlled conditions. Furthermore, where appropriate waste collection schemes and waste treatment infrastructures are available in a Member State as required by Article 22 of Directive 2008/98, there should be a limited flexibility in deciding whether to mandate the use of compostable plastics for lightweight plastic carrier bags on its territory. In order to avoid consumer confusion about the correct disposal and considering the environmental benefit of circularity of the carbon, all other plastic packaging not labeled as compostable should go into material recycling and the design of such packaging should ensure that it does not affect the recyclability of other waste streams.
Amendment 377 #
2022/0396(COD)
Proposal for a regulation
Recital 37
Recital 37
Amendment 381 #
2022/0396(COD)
Proposal for a regulation
Recital 38
Recital 38
(38) In order to facilitate conformity assessment with requirements on compostable packaging, it is necessary to provide for presumption of conformity for compostable packaging which is in conformity with harmonised standards adopted in accordance with Regulation (EU) No 1025/2012 of the European Parliament and of the Council56for the purpose of expressing detailed technical specifications of those requirements and take into account, in line with the latest scientific and technological developments, the parameters, including compostquality of the output, proper processingtimes and admissible levels of contamination, which reflect the actual conditions in bio- waste treatment facilities, including anaerobic digestion processes. _________________ 56 Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council Text with EEA relevance (OJ L 316, 14.11.2012, p. 12).
Amendment 385 #
2022/0396(COD)
Proposal for a regulation
Recital 39
Recital 39
Amendment 388 #
2022/0396(COD)
Proposal for a regulation
Recital 40
Recital 40
(40) Packaging should be designed, where relevant for a given shape, so as to minimise its volume and weight while maintaining its ability to perform the packaging functions, including those referred to in Article 3 (1). The manufacturer of packaging should assess the packaging against the performance criteria, as listed in Annex IV of this Regulation. In view of the objective of this Regulation to reduce packaging and packaging waste generation and to improve circularity of packaging across the internal market, it is appropriate to further specify the existing criteria and to make them more stringent. The list of the packaging performance criteria, as listed in the existing harmonised standard EN 13428:200057, should therefore be modified. While marketing and consumer acceptance remain relevant for packaging designpresentation,design and differentiation functionality, they should not be part ofthe mainperformance criteria justifying on their own additional packaging weight and volume. However, this should not compromise product or packagingspecifications for craft and industrial products and food , beveragesand agricultural products that are registered aundprotected under theEU geographical indication protection schemeer or otherwiseprotected by Union intellectual property law orEU geographical indication protection schemes, including third country geographical indication/products that have been given distinctive recognition by the Union, as part of the Union’s objective to protect intellectual property,cultural heritage and traditional know- how.Traditional packaging associated with products that have been given distinctive recognition or are subject to geographical indications of origin protection shall nevertheless look to reduce packaging weight to the lowest weight possible whilst protecting the shape of the packaging in line with the overall ambitions of this proposal. On the other hand, recyclability, the use of recycled content, and re-use may justify additional packaging weight or volume, and should be added to the performance criteria. Packaging with double walls, false bottoms and other characteristics only aimed to increase the perceived product volume should not be placed on the market, as it does not meet the requirement for packaging minimisation. The same rule should apply to superfluous packaging not necessary for ensuring packaging functionality. _________________ 57 Packaging – Requirements specific to manufacturing and composition – Prevention by source reduction.
Amendment 409 #
2022/0396(COD)
Proposal for a regulation
Recital 44
Recital 44
(44) It is necessary to inform consumers and to enable them to appropriately dispose of packaging waste, including compostable lightweight and very lightweight plastic carrier bags. The most appropriate manner to do this is to establish a harmonised labelling system based on the material composition of packaging for sorting of waste, and to pair it with corresponding labels on waste receptacles. To this end, the Commission and the Member States should provide incentives, including economic ones, especially to micro- enterprises and SMEs.
Amendment 416 #
2022/0396(COD)
Proposal for a regulation
Recital 47
Recital 47
(47) In order to inform end-users about reusability, availability of systems for re- use and location of collection points as regards reusable packaging, such packaging should bear a QR code or other data carrier that provides such information. The QR code should also facilitate tracking and the calculation of trips and rotations. In addition, reusable sales packaging should be clearly identified at the point of sale. To this end, the Commission and the Member States should provide incentives, including economic ones, especially to micro-enterprises and SMEs.
Amendment 436 #
2022/0396(COD)
Proposal for a regulation
Recital 61
Recital 61
Amendment 460 #
2022/0396(COD)
Proposal for a regulation
Recital 67
Recital 67
(67) In order to reduce the increasing proportion of packaging that is single use and the growing amounts of packaging waste generated, it is necessary to establish quantitative re-use and refill targets on packaging in sectors, which have been assessed as having the greatest potential for packaging waste reduction, namely food and beverages for take-away, large- white goods and some transport packaging. This was appraised based on factors such as existing systems for re-use, necessity of using packaging and the possibility of fulfilling the functional requirements in terms of containment, tidiness, health, hygiene and safety. Differences of the products and their production and distribution systems, were also taken into account. The setting of the targets is expected to support the innovation and increase the proportion of re-use and refill solutions. The use ofIn accordance with Article 4(2) of Directive 2008/98/EC, restriction shall not apply for single -use packaging for food and beverages filled and consumed within the premises in the HORECA sector should not be alloweddelivering a better overall environmental outcome justified by life cycle thinking, as well as a better overall economic and health impact.
Amendment 465 #
2022/0396(COD)
Proposal for a regulation
Recital 68
Recital 68
(68) To increase their effectiveness and ensure the equal treatment of economic operators, the re-use and refill targets should be placed on the economic operators. In cases of targets for beverages, they should be additionally placed also on the manufacturers, as these actors are able to control the packaging formats used for the products they offer and decide based on thorough consideration of logistics, environmental, technical, industrial and consumer criteria. The targets should be calculated as a percentage of sales in reusable packaging within a system for re- use or through refill or, in case of transport packaging, as a percentage of uses. The targets should be material neutral. A detailed assessment should be carried out to ensure that reuse targets can be implemented in a safe, economically viable and environmentally sustainable way that would bring tangible benefits compared to recyclable alternatives. In order to ensure uniform conditions for the implementation of targets for re-use and refill, the power to adopt an implementing act in accordance with Article 291 of the Treaty on the methodology for their calculation, should be delegated to the Commission.
Amendment 484 #
2022/0396(COD)
Proposal for a regulation
Recital 78
Recital 78
(78) In order to ensure uniform conditions for the implementation of the recourse to common technical specifications, the power to adopt implementing acts in accordance with Article 291 of the Treaty should be delegated to the Commission to lay down, amend or repeal common technical specifications for the requirements on sustainability, labelling and systems for re- use, and to adopt test, measurement or calculation methods. That should be limited to those cases where technical standardization is unable to provide a concrete response to the purposes of this Regulation.
Amendment 495 #
2022/0396(COD)
Proposal for a regulation
Recital 91
Recital 91
(91) To achieve an ambitious and sustained reduction in the overall packaging waste generation, targets should be laid down for the reduction of packaging waste per capita to be achieved by 2030. Meeting a target of 5 % reduction in 2030 compared to 2018 should entail an overall absolute reduction of approximately 19 % on average acmaterial (plastics, wood, ferrosus the Union in 2030 compared to the 2030 baseline. Member States should reduce packaging waste generation by 10 %, compared to 2018, by 2035; this is estimated to reduce packaging waste by 29 % compared to the 2030 baseline. In order to ensure that the reduction efforts continue beyond 2030, a reduction target of 10 % from 2018, which would mean a reduction of 29 % compared to baseline, should be set for 2035 and, for 2040, a reduction target of 15 % from 2018, which means a reduction of 37 % compared to baseline should be establishedmetals, aluminium, glass and paper and cardboard) per capita to be achieved by 2040.
Amendment 503 #
2022/0396(COD)
Proposal for a regulation
Recital 91 a (new)
Recital 91 a (new)
(91a) Waste prevention through reduction at source by material should be a key guiding principle, as per the existing harmonised standard EN 13428:200030, whereby the substitution of one packaging material by another is not a basis for source reduction.
Amendment 516 #
2022/0396(COD)
Proposal for a regulation
Recital 98
Recital 98
(98) Regulation (EU) 2022/2065 of the European Parliament and of the Council66lays down rules on the traceability of traders, which more specifically contain obligations for providers of online platforms allowing consumers to conclude distance contracts with producers offering packaging to consumers located in the Union. In order to prevent free-riding from the extended producer responsibility obligations, it should be specified how such providers of online platforms should fulfil those obligations with regard to the registers of packaging producers established pursuant to this Regulation. In that context, providers of online platforms, falling within the scope of Section 4 of Chapter 3 of Regulation (EU) 2022/2065, allowing consumers to conclude distance contracts with producers should obtain from those producers information about their compliance with the extended producer responsibility rules set out in this Regulation. The rules on traceability of traders selling packaging online are subject to the enforcement rules set out in Regulation (EU) 2022/2065. As it can be difficult to supervise the concrete application of the obligations of the Regulation in the case of distance selling, particular attention should be paid to tools and control methods that ensure the proper implementation of the provisions. _________________ 66 Regulation (EU) 2022/2065 of the European Parliament and of the Council of 19 October 2022 on a Single Market For Digital Services and amending Directive 2000/31/EC (Digital Services Act) (OJ L 277, 27.10.2022, p. 1).
Amendment 529 #
2022/0396(COD)
Proposal for a regulation
Recital 103
Recital 103
(103) Deposit and return systems should be obligatory for single use plastic beverage bottles and metal beverage containers. Member States might also decide to include other packaging in these systems, in particular single use glass bottles, and should ensure that deposit and return systems for single-use packaging formats, in particular for single use glass beverage bottles, are equally available for reusable packaging, where technically and economically feasible. They should consider establishing deposit and return systems also for reusable packaging. In such situations, a Member State should be allowed, while observing the general rules laid down in the Treaty and complying with the provisions set out in this Regulation, adopt provisions which go beyond the minimum requirements set out in this Regulation.
Amendment 564 #
2022/0396(COD)
Proposal for a regulation
Recital 133
Recital 133
(133) When adopting delegated acts pursuant to Article 290 of the Treaty, the Commission should carry out appropriate consultations during its preparatory work, including at expert level, and those consultations be conducted in accordance with the principles laid down in the Inter- institutional Agreement of 13 April 2016 on Better Law-Making78. InpParticular, to ensure equal participation in the preparation of delegated acts, the European Parliament and the Council receive all documents at the same time as Member States’ experts, and their experts systematically have access to meetings of Commission expert groups dealing with the preparation of delegated acts.When developing these delegated acts, the Commissionshould take into account scientific or other available technical information, including relevant international standard attentionshould be paid to the consultation of SMEs representatives. _________________ 78 OJ L 123, 12.5.2016, p. 1–14.
Amendment 570 #
2022/0396(COD)
Proposal for a regulation
Recital 141 a (new)
Recital 141 a (new)
(141a) For the sake of clarity for food business operators, the nomenclature codes referred to food categories mentioned in Article 26 and Article 44 are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/871 and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.
Amendment 583 #
2022/0396(COD)
Proposal for a regulation
Article 2 – paragraph 1
Article 2 – paragraph 1
1. This Regulation applies to all packaging, with the exception of packaging approved for the transport of dangerous goods regardless of the material used, and to all packaging waste, whether such waste is used in or originates from industry, other manufacturing, retail or distribution, offices, services or households.
Amendment 588 #
2022/0396(COD)
Proposal for a regulation
Article 2 – paragraph 2
Article 2 – paragraph 2
2. This Regulation applies without prejudice to Union regulatory requirements for packaging such as those regarding safety, quality, the protection of health and the hygiene of the packed products, or to transport requirements, as well as without prejudice to the provisions of the Directive 2008/98/EC as regards the management of hazardous waste and as regards the requirements provided for in paragraph 2 of Article 4 of Directive 2008/98/EC.
Amendment 604 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 1 – point f
Article 3 – paragraph 1 – point 1 – point f
(f) permeable tea or coffee bagsingle- serve units necessary to contain a tea or coffee product and intended to be used and disposed of together with the product;
Amendment 616 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 1 – point g
Article 3 – paragraph 1 – point 1 – point g
(g) coffee or tea systemprotective beverage single-serve unit necessary to contain a coffee or tea product and intended to be used and disposed of together with the product;
Amendment 620 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 1 a (new)
Article 3 – paragraph 1 – point 1 a (new)
(1a) 'recyclability' means the compatibility of packaging with the management and processing of waste, based on separate collection, sorting in separate streams, recycling at scale, and use of recycled materials to replace primary raw materials;
Amendment 634 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 18 a (new)
Article 3 – paragraph 1 – point 18 a (new)
(18a) 'plastic packaging' means packaging consisting of plastics as the predominant material.
Amendment 642 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 19
Article 3 – paragraph 1 – point 19
(19) ‘composite packaging’ means a unit of packaging made of two or more different materials, excluding materials used for labels, closures and sealing, which cannot be separated manually and therefore form a single integraloatings, linings, paints, inks, adhesives, closures and sealing which are considered as part of the weight of the main packaging material, which cannot be separated manually and therefore form a single integral unit, unless a given material constitutes an insignificant part of the packaging unit and in no case more than 15% of the total mass of the packaging unit;
Amendment 695 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 32
Article 3 – paragraph 1 – point 32
(32) ‘recycled at scale’ means collected, sorted and recycled through installed state-of-the-art infrastructure and processes, covering at least 75 % of the Union populationthe existence of a clear pathway, including the development of sufficient capacity for the collected packaging waste to be directed towards defined and recognised waste streams through established industrial processes for reprocessing, including packaging waste exported from the Union that meets the requirements of Article 47(5);
Amendment 702 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 32 a (new)
Article 3 – paragraph 1 – point 32 a (new)
(32a) 'high quality recycling’ means any recovery operation, as defined in Article 3, point (17), of Directive 2008/98/EC, that ensures that the distinct quality of the collected and sorted waste is preserved or recovered during that recovery operation, so that the resulting recycled materials are of sufficient quality to substitute primary raw materials with minimal loss of quantity, quality or function;
Amendment 716 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 34
Article 3 – paragraph 1 – point 34
(34) ‘integrated component’ means a packaging component that may be distinct from the main body of the packaging unit, and may be of a different material, but is integral to the packaging unit and its functioning and does not need to be separated from the main packaging unit in order to consume the product and is typically discarded at the same time as the packaging unit, although not necessarily in the same disposal route;is recommended to be disposed together with the main body of the packaging.
Amendment 723 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 35
Article 3 – paragraph 1 – point 35
(35) ‘separate component’ means a packaging component that is distinct from the main body of the packaging unit, which may be of a different material, that needs to becan be manually disassembled completely and permanently from the main packaging unit in order to access the product, and that is typically discarded prior to anbody of the packaging by the end consumer, and that is recommended to be disposed separately from the main body of the packaging unit;
Amendment 733 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 38
Article 3 – paragraph 1 – point 38
Amendment 741 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 39 a (new)
Article 3 – paragraph 1 – point 39 a (new)
(39a) “recycled content in plastic packaging” is the amount of material contained in the packaging obtained from any recycling process of pre-consumer and post-consumer waste, whether to be recycled mechanically, physically or chemically.
Amendment 746 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 1 – point 39 b (new)
Article 3 – paragraph 1 – point 39 b (new)
(39b) 'pre-consumer plastic waste' means plastic waste that is generated from production and converting of plastic material.
Amendment 783 #
2022/0396(COD)
Proposal for a regulation
Article 3 – paragraph 2
Article 3 – paragraph 2
The definitions of ‘substance of concern’ and ‘data carrier’ laid down in Article [2 points (28) and (30)] of Regulation [Ecodesign for sustainable products] shall apply;
Amendment 799 #
2022/0396(COD)
Proposal for a regulation
Article 4 – paragraph 5
Article 4 – paragraph 5
Amendment 812 #
2022/0396(COD)
Proposal for a regulation
Article 4 – paragraph 6 a (new)
Article 4 – paragraph 6 a (new)
6a. Any additional Member State information and labelling requirements that go beyond the requirements of this Regulation shall not be considered as mandatory but used on a voluntary basis.
Amendment 816 #
2022/0396(COD)
Proposal for a regulation
Article 5 – paragraph 1
Article 5 – paragraph 1
1. Packaging shall be so manufactured that the presence and concentration of substances of concernthat meet the criteria in Article 57 and identified in accordance with Article 59(1) in a concentration above 0,1 % weight by weight (w/w) as laid down the Regulation (EC) No 1907/2006, as constituents of the packaging material or of any of the packaging components is minimised, including with regard to their presence in emissions and any outcomes of waste management, such as secondary raw materials, ashes or other material for final disposal.
Amendment 821 #
2022/0396(COD)
Proposal for a regulation
Article 5 – paragraph 2
Article 5 – paragraph 2
2. Without prejudice toOther than the substances criteria laid down in Article 5(1), shall be applied the restrictions on chemicals set out in Annex XVII of Regulation (EC) No 1907/2006 or, where applicable, to the restrictions and specific measures on food contact packaging in Regulation (EC) No 1935/2004, the sum of concentration levels of lead, cadmium, mercury and hexavalent chromium resulting from substances present in packaging or packaging components shall not exceed 100 mg/kg.
Amendment 843 #
2022/0396(COD)
Proposal for a regulation
Article 5 – paragraph 4
Article 5 – paragraph 4
4. Recyclability requirements established in delegated acts adopted pursuant to Article 6(5)by CEN - European Committee for Standardization shall not restrict the presence of substances in packaging or packaging components for reasons relating primarily to chemical safety. They shall address, as appropriate, substances of concern that negatively affect the re-use and recycling of materials in the packaging in which they are present, and shall, as appropriate, identify the specific substances concerned and their associated criteria and limitations.
Amendment 867 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 1
Article 6 – paragraph 1
1. All packaging shall be recyclable from 1 January 2030.
Amendment 875 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 1 – point a
Article 6 – paragraph 2 – subparagraph 1 – point a
(a) it is designed for recycling or, for compostable packaging, is compliant with point a), b) and c) of Annex III;
Amendment 894 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 1 – point d
Article 6 – paragraph 2 – subparagraph 1 – point d
(d) except for compostable plastics, it can be recycled so that the resulting secondary raw materials are of sufficient quality to substitute the primarya raw materials;
Amendment 910 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 2
Article 6 – paragraph 2 – subparagraph 2
Points (a) to (d) shall apply from 1 January 2030 and point (e) shall apply from 1 January 2035.
Amendment 934 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 3
Article 6 – paragraph 3
3. Recyclable packaging shall, from 1 January 2030, comply with the design for recycling criteria as laid down in the delegated actsCEN standards, where applicable, adopted pursuant to paragraph 4 and, from 1 January 2035, also with the recyclability at scale requirements laid down in the delegated actCEN standards adopted pursuant to paragraph 6. Where such packaging complies with those delegated actstandards, it shall be considered to comply with paragraph 2, points (a) and (e).
Amendment 953 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 4 – subparagraph 1
Article 6 – paragraph 4 – subparagraph 1
Amendment 974 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 4 – subparagraph 2
Article 6 – paragraph 4 – subparagraph 2
The Commission is empowered to adopt delegated acts, in close cooperation with stakeholders, in accordance with Article 58 to amend Table 1 of Annex in order to adapt it to scientific and technical development in material and product design, collection, sorting and recycling infrastructure.
Amendment 1026 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 7 – point a
Article 6 – paragraph 7 – point a
(a) the manner in which to express the result of the recyclability assessment in recyclability performance grades from A to E, as described in Table 3 of Annex IIthe delegated act adopted under paragraph 3, based on the percentage of the packaging unit, in weight, which is recyclable according to paragraph 1;
Amendment 1027 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 7 – point b
Article 6 – paragraph 7 – point b
(b) detailed design for recycling criteria including material specific requirements on the quality of recycling, where and when needed, for each packaging formaterial and category listed in Table 1 of Annex II;
Amendment 1042 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 8 – subparagraph 4 a (new)
Article 6 – paragraph 8 – subparagraph 4 a (new)
Small components (i.e., <50 mm in two dimensions) represent a particular challenge to current packaging material recycling facility capabilities. By way of derogation from paragraphs 2 and 3, such small components may be placed on the market until the Delegated Act establishing the Design for Recycling criteria is adopted. The Design for Recycling criteria to be established under the Delegated Act as referred to in paragraph 4 shall consider the requirements for small components and be compatible with the state of the art collection, sorting and recycling processes.
Amendment 1052 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 9 – subparagraph 2
Article 6 – paragraph 9 – subparagraph 2
Where use is made of this derogation, innovative packaging shall be accompanied by technical documentation, referred to in Annex VII, demonstrating its innovative nature and showing compliance with the definition in Article 3(347) of this Regulation.
Amendment 1057 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 10 – introductory part
Article 6 – paragraph 10 – introductory part
10. Until 31 December 2034, tThis Article shall not apply to the following:
Amendment 1062 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 10 – point b
Article 6 – paragraph 10 – point b
(b) contact sensitive plastic packaging of medical devices covered by Regulation (EU) 2017/745;
Amendment 1065 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 10 – point c
Article 6 – paragraph 10 – point c
(c) contact sensitive plastic packaging of in vitro diagnostics medical devices covered by Regulation (EU) 2017/746.
Amendment 1074 #
2022/0396(COD)
Proposal for a regulation
Article 6 – paragraph 10 a (new)
Article 6 – paragraph 10 a (new)
10a. outer packaging as defined in Article 1, point (24), of Directive 2001/83/EC and in Article 4, point (26), of Regulation (EU) 2019/6, in cases where such packaging is necessary to comply with specific requirements to preserve the quality of the medicinal product. Should the adoption of the delegated acts referred to in paragraphs 4 and 6 of this Article be delayed, a presumption of compliance with the points a) and e) of paragraph 2 shall apply to all packaging placed on the Union market until such delegated acts are adopted.
Amendment 1112 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 1 – introductory part
Article 7 – paragraph 1 – introductory part
1. From 1 January 2030, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from pre-consumer or post- consumer plastic waste, per unit of packaging:
Amendment 1116 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 1 – point a
Article 7 – paragraph 1 – point a
(a) 30 % for contact sensitive plastic packaging made from polyethylene terephthalate (PET) as the major component;
Amendment 1132 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 1 – point b
Article 7 – paragraph 1 – point b
(b) 10 % for contact sensitive plastic packaging made from plastic materials other than PET, except single use plastic beverage bottles;
Amendment 1146 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 1 – subparagraph 1 (new)
Article 7 – paragraph 1 – subparagraph 1 (new)
Targets per material shall be calculated as a percentage of the total number of units placed by a producer on the internal market.
Amendment 1175 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 2 – introductory part
Article 7 – paragraph 2 – introductory part
2. From 1 January 2040, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from pre-consumer or post- consumer plastic waste, per unit of packaging:
Amendment 1187 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 2 – subparagraph 1 (new)
Article 7 – paragraph 2 – subparagraph 1 (new)
Targets per material shall be calculated as a percentage of the total number of units placed by a producer on the internal market.
Amendment 1196 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 3 – point b
Article 7 – paragraph 3 – point b
(b) contact sensitive plastic packaging of medical devices covered by Regulation (EU) 2017/745;
Amendment 1198 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 3 – point c
Article 7 – paragraph 3 – point c
(c) contact sensitive plastic packaging of in vitro diagnostics medical devices covered by Regulation (EU) 2017/746;
Amendment 1213 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 4
Article 7 – paragraph 4
4. Paragraphs 1 and 2 shall not apply to compostable plastic packaging. as well as to inks, adhesives, varnishes and coatings used on packaging. Compostable packaging can be placed on the market providing the presence of a minimum content of renewable raw material determined as percentage of carbon of biological origin present in packaging compared to the total carbon present therein and using for this purpose the current European standard on the subject based on radiocarbon methods EN 16640. Agricultural biomass used for the manufacture of compostable packaging complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001. Forest biomass used for the manufacture compostable packaging complies with the criteria laid down in Article 29, paragraphs 6 and 7 of that Directive.
Amendment 1230 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 4 a (new)
Article 7 – paragraph 4 a (new)
4a. By 12 months from the entry into force of this Regulation, compostable packaging shall contain a minimum content of renewable raw material of at least 60%.
Amendment 1232 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 4 b (new)
Article 7 – paragraph 4 b (new)
4b. Paragraphs 1 and 2 shall not apply to innovative packaging as defined at article 3 para 37.
Amendment 1240 #
2022/0396(COD)
6. By 1 January 2030, the financial contributions paid by producers to comply with their extended producer responsibility obligations as laid down in Article 40 shall be modulated based on the percentage of recycled content used in the packagingtaking into account the cost of packaging waste management and the revenues from sales of secondary materials.
Amendment 1246 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 7
Article 7 – paragraph 7
7. By 31 December 2026, the Commission is empowered to adopt implementing acts establishing the methodology for the calculation and verification of the percentage of recycled content recovered from post-consumer plastic waste, per unit of plastic packaging, and the format for the technical documentation referred to in Annex VII. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3). The implementing acts can specify that calculation of recycled content from packaging covered by Regulation No 1935/2004 on materials and articles intended to come into contact with food is only included in the calculation of recycled content if the packaging application is also covered by Regulation No 1935/2004 on materials and articles intended to come into contact with food.
Amendment 1287 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 1
Article 7 – paragraph 9 – subparagraph 1
By 1 January 2028, the Commission shall assess the need for derogations from the minimum percentage laid down in paragraph 1, points b and d, for specific plastic packaging, or for the revision of the derogation established under paragraph 3 for specific plastic packaging.
Amendment 1309 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 2 – point a
Article 7 – paragraph 9 – subparagraph 2 – point a
(a) provide for derogations from the scope, timing or level of minimum percentage laid down in paragraph 1, points b and d, for specific plastic packaging, and, as appropriate,
Amendment 1312 #
2022/0396(COD)
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 2 – point b
Article 7 – paragraph 9 – subparagraph 2 – point b
Amendment 1347 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 1
Article 8 – paragraph 1
1. By 2030 [OP: please insert the date = 24 months from the entry into force of this Regulation], packaging referred to in Article 3(1), points (f) and (g), sticky labels attached to fruit and vegetables and very lightweight plastic carrier bags shall be compostable in industrially controlled conditions in bio-waste treatment facilities and therefore allowed to be collected in bio-waste receptacles.
Amendment 1362 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 1 a (new)
Article 8 – paragraph 1 a (new)
1a. Compostable packaging can be placed on the market providing the presence of a minimum content of renewable raw material determined as percentage of carbon of biological origin present in packaging compared to the total carbon present therein and using for this purpose the current European standard on the subject based on radiocarbon methods EN 16640. Agricultural biomass used for the manufacture of compostable packaging complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001. Forest biomass used for the manufacture compostable packaging complies with the criteria laid down in Article 29, paragraphs 6 and 7 of that Directive.
Amendment 1363 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 2
Article 8 – paragraph 2
Amendment 1372 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 2 a (new)
Article 8 – paragraph 2 a (new)
2a. Member States which have transposed Article 22 of Directive 2008/98 and have appropriate waste collection schemes and waste treatment infrastructure are empowered to require that lightweight plastic carrier bags shall be compostable in industrially controlled conditions. The same provision shall apply to compostable packaging formats.
Amendment 1378 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 3
Article 8 – paragraph 3
3. By [OP: Please insert the date = 24 months from the date of entry into force of this Regulation], packaging, labeled as compostable, other than that referred to in paragraphs 1 and 2, including packaging made of biodegradshall comply with the criteria listed in Annex III. Packaging made with compostable material that is not labele plastic polymers,d as compostable shall allow material recycling without affecting the recyclability of other waste streams.
Amendment 1381 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 4 a (new)
Article 8 – paragraph 4 a (new)
4a. By [OP: please insert the date = 12 months from the entry into force of this Regulation] compostable packaging shall contain a minimum content of renewable raw material of at least 60%.
Amendment 1383 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 5
Article 8 – paragraph 5
5. TAfter an assessment of the Expert Group, the Commission shall be empowered to adopt delegated acts in accordance with Article 58 to amend paragraphs 1 and 2 of this Article by addingdd other types of packaging to the types of packaging covered by those paragraphs 1 and 2 of this Article when it is justified and appropriate due to technological and regulatory developments impacting the disposal of compostable packaging and under the conditions set out in Annex III. A public register containing the lists of such applications should be established and updated by the Commission.
Amendment 1390 #
2022/0396(COD)
Proposal for a regulation
Article 8 – paragraph 5 a (new)
Article 8 – paragraph 5 a (new)
5a. By 1 January 2030, the financial contributions paid by producers to comply with their extended producer responsibility obligations as laid down in Article 40 shall be collected and managed by a dedicated extended producer responsibility scheme.
Amendment 1402 #
2022/0396(COD)
Proposal for a regulation
Article 9 – paragraph 1
Article 9 – paragraph 1
1. PBy 1 January 2030, packaging shall be designed so that its weight and volume is reduced to the minimum necessary for ensuring its functionalitys, as listed in the definition of packaging in Article 3(1), taking account of the material that the packaging is made of and its design, for a given material and a given shape.
Amendment 1422 #
2022/0396(COD)
Proposal for a regulation
Article 9 – paragraph 2
Article 9 – paragraph 2
2. PBy 1 January 2030, packaging not necessary to comply with any of the performance criteria set out in Annex IV and packaging with characteristics that are only aimed to increase the perceived volume of the product, including double walls, false bottoms, and unnecessary layers, shall not be placed on the market, unless the packaging design is subject to geographical indications of origin, shall not be placed on the market, unless the product or packaging design is subject to intellectual property protection or benefits from the Union's geographical indications of origin protection or have been given distinctive product recognition by the Union, in each case protected under Union legislation.
Amendment 1432 #
2022/0396(COD)
Proposal for a regulation
Article 9 – paragraph 3 – subparagraph 1 – introductory part
Article 9 – paragraph 3 – subparagraph 1 – introductory part
Amendment 1437 #
2022/0396(COD)
Proposal for a regulation
Article 9 – paragraph 3 – subparagraph 2
Article 9 – paragraph 3 – subparagraph 2
For the purpose of assessing the compliance with this paragraph, space filled by paper cuttings, air cushions, bubble wraps, sponge fillers, foam fillers, wood wool, polystyrene, styrofoam chips or other filling materials shall be considered as empty space, unless required to protect and to transport the goods.
Amendment 1445 #
2022/0396(COD)
Proposal for a regulation
Article 9 – paragraph 4 – subparagraph 1 – point b
Article 9 – paragraph 4 – subparagraph 1 – point b
(b) the identification of the design requirements, including those related to intellectual property rights , which prevent further reduction of the packaging weight or volume, for each of these performance criteria;
Amendment 1465 #
2022/0396(COD)
Proposal for a regulation
Article 10 – paragraph 1 – point b
Article 10 – paragraph 1 – point b
Amendment 1498 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 1 – subparagraph 1
Article 11 – paragraph 1 – subparagraph 1
Amendment 1530 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 2
Article 11 – paragraph 2
2. From [OP: Please insert the date = 48 months after the date of entry into force of this Regul36 months after the adoption of the implementing act referred to in paragraph 5, information], on packaging shall bear a label on packaging reusability andreusability shall be marked on a label on packaging or shall be available through a QR code or other type of digital data carrier that provides further information on packaging reusability including the availability of a system for re-use and of collection points, and that facilitates the tracking of the packaging and the calculation of trips and rotations. In addition, reusable sales packaging shall be clearly identified and distinguished from single use packaging at the point of sale.
Amendment 1541 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 4 – subparagraph 1
Article 11 – paragraph 4 – subparagraph 1
Labels referred to in paragraphs 1 to 3 and the QR code or other type of digital data carrier referred to in paragraph 2 shall be placed, printed or engraved visibly, clearly legibly and indelibly on the packaging. Where this is not possible or not warranted on account of the nature and size of the packaging, information should be conveyed to consumers via digital means of communication (e.g., website, QR code) or they shall be affixed to the grouped packaging.
Amendment 1547 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 4 – subparagraph 1 a (new)
Article 11 – paragraph 4 – subparagraph 1 a (new)
By way of derogation from paragraph 4, the information referred to in paragraph 1 to 3 may be provided by electronic means identified on the package or on a label attached thereto.In such cases, the following requirements apply: (a) no user data shall be collected or tracked; (b) the information shall not be displayed with other information intended for sales or marketing purposes.
Amendment 1550 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 4 – subparagraph 2
Article 11 – paragraph 4 – subparagraph 2
Where Union legislation requires information on the packaged product to be provided via a data carrier, a single data carrier shall be used for providing the information required for both the packaged product and the packaging. From [Please insert the date = 24 months after the entry into force of this Regulation] the Commission shall adopt guidance regarding provision of information by digital means.
Amendment 1557 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 5
Article 11 – paragraph 5
5. By [OP: Please insert the date = 18 2 months after the date of entry into force of this Regulation], the Commission shall adopt implementing acts to establish a harmonised label and specifications for the labelling requirements and formats for the labelling of or the digital provision of information related to packaging referred to in paragraphs 1 to 3 and the labelling of waste receptacles referred to in Article 12. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3).
Amendment 1562 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 6
Article 11 – paragraph 6
6. By [OP: Please insert the date = 124 months after the date of entry into force of this Regulation], the Commission shall adopt implementing acts to establish the methodology for identifying the material composition of packaging referred to in paragraph 1 by means of digital marking technologies. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3).
Amendment 1566 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 7
Article 11 – paragraph 7
7. Without prejudice to requirements concerning other harmonised EU labels, economic operators shall not provide or display labels, marks, symbols or inscriptions that are likely to mislead or confuse consumers or other end users with respect to the sustainability requirements for packaging, other packaging characteristics or packaging waste management options, for which harmonised labelling has been laid down in this Regulation. From [OP: Please insert the date = 24 months after the entry into force of this Regulation] the Commission shall adopt guidance regarding aspects that are likely to mislead or confuse consumers or other end users.
Amendment 1574 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 8
Article 11 – paragraph 8
8. Packaging included in an extended producer responsibility scheme or covered by a deposit and return system other than that referred to in Article 44(1) mayshall be identified by means of a corresponding symbol throughout the territory in which that scheme or system applies. That symbol shall be clear and unambiguous and shall not mislead consumers or users as to the recyclability or reusability of the packagingharmonised symbol to be established via an implementing act by the Commission in accordance with the examination procedure referred to in Article 59 (3).
Amendment 1580 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 8 a (new)
Article 11 – paragraph 8 a (new)
8a. Packaging referred to in paragraphs 1, 2 and 3, manufactured or imported before these deadlines, may be marketed until the stocks of the products are exhausted.
Amendment 1585 #
2022/0396(COD)
Proposal for a regulation
Article 11 – paragraph 8 b (new)
Article 11 – paragraph 8 b (new)
8b. This Article shall not apply to pharmaceutical packaging.
Amendment 1607 #
2022/0396(COD)
Proposal for a regulation
Article 13 – paragraph 6
Article 13 – paragraph 6
Amendment 1619 #
2022/0396(COD)
Proposal for a regulation
Article 13 – paragraph 9 a (new)
Article 13 – paragraph 9 a (new)
9a. Paragraphs 1 to 6 do not apply to custom made transport packaging for configurable devices and systems designed to be used in industrial and healthcare settings.
Amendment 1630 #
2022/0396(COD)
Proposal for a regulation
Article 16 – paragraph 3
Article 16 – paragraph 3
Amendment 1643 #
2022/0396(COD)
Proposal for a regulation
Article 17 – paragraph 2 – point c
Article 17 – paragraph 2 – point c
(c) the manufacturer and the importer have complied with the requirements set out in Article 13(5) and (6) and Article 16(3) respectively.
Amendment 1666 #
2022/0396(COD)
Proposal for a regulation
Article 21 – paragraph 1
Article 21 – paragraph 1
1. Economic operators who supply products to a final distributor or an end user in grouped packaging, transport packaging or e-commerce packaging, shall ensure that the empty space ratio is maximum 40 %inimised subject to the provisions within Part 1 and Part 2 of Annex IV.
Amendment 1684 #
2022/0396(COD)
Proposal for a regulation
Article 21 – paragraph 2 – subparagraph 2
Article 21 – paragraph 2 – subparagraph 2
Space filled by filling materials such as paper cuttings, air cushions, bubble wraps, sponge fillers, foam fillers, wood wool, polystyrene or Styrofoam chips, shall be considered as empty space, unless required to protect and to transport the goods.
Amendment 1697 #
2022/0396(COD)
Proposal for a regulation
Article 22
Article 22
Amendment 1750 #
2022/0396(COD)
Proposal for a regulation
Article 22 – paragraph 4
Article 22 – paragraph 4
4. The Commission shall be empowered to adopt delegated acts in accordance with Article 58 to amend Annex V in order to adapt it to technical and scientific progress with the objective to reducing packaging waste and improving the overall environmental outcomes in line with paragraph 2 of Article 4 of Directive 2008/98/EC. When adopting those delegated acts, the Commission shall consider the potential of the restrictions on the use of specific non-recyclable packaging formats to reduce the packaging waste generated while ensuring an overall positive environmental impact, and shall take into account the availability of alternative packaging solutions that meet requirements set out in legislation applicable to contact sensitive packaging, as well as their capability to prevent microbiological contamination of the packaged product.
Amendment 1780 #
Amendment 2162 #
Amendment 2217 #
2022/0396(COD)
Proposal for a regulation
Article 38 – paragraph 1 – introductory part
Article 38 – paragraph 1 – introductory part
1. Each Member State shall reduce the packaging waste generated per capita, as compared to the packaging waste generated per capita in 2018the year of entry into force of this Regulation as reported to the Commission in accordance with Decision 2005/270/EC, for each of the specific materials contained in packaging waste listed in article 46, by
Amendment 2224 #
Amendment 2230 #
Amendment 2242 #
Amendment 2253 #
2022/0396(COD)
Proposal for a regulation
Article 38 – paragraph 3
Article 38 – paragraph 3
3. For the purpose of paragraph 2, Member States may use economic instruments and other measures to provide incentives for the application of the waste hierarchy, such as measures referred to in Annexes IV and IVa to Directive 2008/98/EC, or other appropriate instruments and measures, including incentives through extended producer responsibility schemes and requirements on producers or producer responsibility organisations to adopt waste prevention plans. Such measures shall be proportionate and non-discriminatory and be designed so as to avoid barriers to trade or distortions of competition in conformity with the Treaty and with Article 4 of this Regulation.
Amendment 2271 #
2022/0396(COD)
Proposal for a regulation
Article 39 – paragraph 2
Article 39 – paragraph 2
2. Producers shall be obliged to register in the register referred to in paragraph 1. They shall, to that end, submit an application for registration in each Member State where they make packaging available on the market for the first timethe home country. Where a producer has appointed a producer responsibility organisation as referred to in Article 41(1), the obligations set out in this Article shall be met by that organisation, unless otherwise specified by the Member State in which the register is established.
Amendment 2305 #
2022/0396(COD)
Proposal for a regulation
Article 43 – paragraph 1
Article 43 – paragraph 1
1. By 1 January 2030, Member States shall ensure that systems are set up to provide for the return and the separate collection of 90% of all packaging waste from the end users of each packaging format listed in Table 1 Annex II, in a given year, in order to ensure that it is treated in accordance with Articles 4 and 13 of Directive 2008/98/EC, and to facilitate its preparation for re-use and high quality recycling.
Amendment 2352 #
2022/0396(COD)
Proposal for a regulation
Article 43 – paragraph 1
Article 43 – paragraph 1
1. By 1 January 2030, Member States shall ensure that systems are set up to provide for the return and the separate collection of 90% of all packaging waste from the end users of each packaging format listed in Table 1 Annex II, in a given year, in order to ensure that it is treated in accordance with Articles 4 and 13 of Directive 2008/98/EC, and to facilitate its preparation for re-use and high quality recycling.
Amendment 2353 #
2022/0396(COD)
Proposal for a regulation
Article 43 – paragraph 1
Article 43 – paragraph 1
1. By 1 January 2030, Member States shall ensure that systems are set up to provide for the return and the separate collection of 90% of all packaging waste from the end users of each packaging format listed in Table 1 Annex II, in a given year, in order to ensure that it is treated in accordance with Articles 4 and 13 of Directive 2008/98/EC, and to facilitate its preparation for re-use and high quality recycling.
Amendment 2685 #
2022/0396(COD)
Proposal for a regulation
Annex II – Table 1 – row 11 a (new)
Annex II – Table 1 – row 11 a (new)
bottles and (11 a) Plastic PET - rigid flasks Opaque white
Amendment 2711 #
2022/0396(COD)
Proposal for a regulation
Annex II – Table 2 a (new)
Annex II – Table 2 a (new)
Indicative parameters that may be considered when developing design criteria for recycling under Article 6: 1. Additives 2. Labels 3. Closure systems and small parts 4. Adhesives 5. Printing inks 6. Colours 7. Material composition 8. Barriers / coatings 9. Ease of dismantling
Amendment 189 #
2022/0365(COD)
Proposal for a regulation
Recital 4
Recital 4
(4) The technical requirements for the type-approval of motor vehicles, engines and replacement parts with regard to emissions (‘emission type-approval’) are currently set out in two Regulations that apply to emission type-approval for light- duty and heavy-duty vehicles respectively, i.e. Regulation (EC) No 715/2007 of the European Parliament and of the Council (‘Euro 6’)44 and Regulation (EC) No 595/2009 of the European Parliament and of the Council (‘Euro VI’)45 . The reason for having two Regulations was that the emissions of heavy-duty vehicles were checked based on engine testing, while for light-duty vehicles the basis was whole vehicle testing. Since then, methodologies have been developed that allow testing of both light- and heavy-duty vehicles on the road. It is therefore no longer necessary to base type-approval on engine testing. _________________ 44 Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (OJ L 171, 29.6.2007, p. 1). 45 Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC (OJ L 188, 18.7.2009, p. 1).
Amendment 197 #
2022/0365(COD)
Proposal for a regulation
Recital 4 a (new)
Recital 4 a (new)
(4a) The type approval requirements for newly manufactured tyres C1, C2 and C3 are set in the General Safety Regulation ((EU) 2019/2144). Consequently, this Regulation complements those technical requirements – which remain the basis for new tyre type approval - with tyre abrasion requirements. The test method to measure tyre abrasion as well as tyre abrasion limits are being developed in the UN. In order to adopt such test method, relevant definitions, and tyre abrasion limits, this Regulation will have to be supplemented by secondary legislation along with the manufacturers’ obligations and relevant timeline for implementation as well as transitional period for tyres manufactured after a certain date according to Article 11 paragraph 3a (new).
Amendment 226 #
2022/0365(COD)
Proposal for a regulation
Recital 8
Recital 8
(8) In order to ensure that the exhaust emissions for both light and heavy duty vehicles are limited in real life, testing vehicles in real conditions of use with a minimum set of restrictions, boundaries and other driving requirements and not only in the laboratory is required.
Amendment 233 #
2022/0365(COD)
Proposal for a regulation
Recital 9
Recital 9
Amendment 245 #
2022/0365(COD)
Proposal for a regulation
Recital 12
Recital 12
(12) Non-exhaust emissions consist of particles emitted by tyres and brakes of vehicles. Emissions from tyres is estimated to be the largest source of microplastics to the environment. As shown in the Impact Assessment, it is expected that by 2050, non-exhaust emissions will constitute up to 90% of all particles emitted by road transport, because exhaust particles will diminish due to vehicle electrification. Those non-exhaust emissions should therefore be measured and limited. The Commission should prepare a report on tyre abrasion by the end of 2024 to review the measurement methods and state-of-the- art in order to propose tyre abrasion limitsdeveloped in the UN with the view of ensuring consistency in the definition of tyre abrasion limits. In addition, the Report should include, to the extent possible, an impact assessment on tyre abrasion requirements, filling the gaps identified in this Regulation’s impact assessment.
Amendment 315 #
2022/0365(COD)
Proposal for a regulation
Recital 22
Recital 22
(22) In order to amend or supplement, as appropriate, non-essential elements of this Regulation, the power to adopt acts in accordance with Article 290 of the Treaty on the Functioning of the European Union should be delegated to the Commission in respect of test conditions based on data collected when testing Euro 7 vehicles, brakes or tyres; test requirements, in particular taking into account technical progress and data collected when testing Euro 7 vehicles; introducing vehicle options and designations based on innovative technologies for manufacturers but also setting out brake particle emission limits and abrasion limits for tyre types in accordance with the test method and limits developed in the UN as well as minimum performance requirements of batteries and durability multipliers based on data collected when testing Euro 7 vehicles and setting out definitions and special rules for small volume manufacturers for vehicles of categories M2, M3, N2, N3, It is of particular importance that the Commission carry out appropriate consultations during its preparatory work, including at expert level, and that those consultations be conducted in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making51 . In particular, in order to ensure equal participation in the preparation of delegated acts, the European Parliament and the Council receive all documents at the same time as Member States' experts, and their experts systematically have access to meetings of Commission expert groups dealing with the preparation of delegated acts. _________________ 51 OJ L 123, 12.5.2016, p. 1.
Amendment 331 #
2022/0365(COD)
Proposal for a regulation
Article 1 – paragraph 1
Article 1 – paragraph 1
1. This Regulation establishes common technical requirements and administrative provisions for the emission type-approval and market surveillance of motor vehicles, systems, components and separate technical units, with regard to their CO2 and pollutant emissions, fuel and energy consumption and battery durability. Technical requirements and administrative provisions established by this regulation for the emission type- approval and market surveillance of newly manufactured tyres, are to be considered together with the tyre technical requirements and administrative provisions of the General Safety Regulation (EU) 2019/2144.
Amendment 360 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 11
Article 3 – paragraph 2 – point 11
(11) ‘particulate matter’ or ‘PM’ means any material emitted from the tailpipe or the brakes and collected on a filter media according to the procedure described in this Regulation;
Amendment 364 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 14
Article 3 – paragraph 2 – point 14
(14) ‘’10 nm particle number above 10 nm’ or ‘PN10’ means the total number of solid particles emitted from the tailpipe or the brakes that have a diameter larger or equal thanmeasured according to the procedure described in this Regulation with a nominal cut-off at 10 nm;
Amendment 369 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 21 a (new)
Article 3 – paragraph 2 – point 21 a (new)
(21a) ‘CO2 neutral fuel’ means a renewable and/or synthetic fuel as defined by Directive 2018/2001 including biofuel, biogas, biomass fuel, renewable liquid and gaseous transport fuel of non biological origin (RFNBO) or a recycled carbon fuel (RCF), where the emissions of the fuel in use (eu) can be taken to be net zero, meaning that the CO2 equivalent of the carbon incorporated in the chemical composition of the fuel in use eu is of biogenic origin and/or has been avoided being emitted as CO2 into the atmosphere or has been captured from ambient air or has avoided its existing fate. Other renewable and/or synthetic fuels not listed in Directive 2018/2001 can fulfil this definition provided that they meet the above criteria and the sustainability criteria of said Directive and associated delegated acts;
Amendment 370 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 21 b (new)
Article 3 – paragraph 2 – point 21 b (new)
(21b) ‘carbon correction factor (CCF)’ means a factor which applies a correction to the CO2 tailpipe emissions of vehicles for compliance assessment, to reflect the GHG emission intensity and the share of CO2 neutral fuels;
Amendment 380 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 34
Article 3 – paragraph 2 – point 34
(34) ‘original pollution control systems’ means a pollution control system or an assembly of such systems covered by the type-approval granted for the vehicle concerned and fitted within the vehicle at the date of its first registration;
Amendment 385 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 37
Article 3 – paragraph 2 – point 37
(37) ‘on-board diagnostic system’ or ‘OBD’ means a system that can generate vehicle on-board diagnostic (OBD) information, as defined in Article 3, point 49, of Regulation (EU) 2018/858 and is capable of communicating that information via the OBD port and over the air, in the context of this Regulation, a system on-board the vehicle which has the capability of detecting malfunctions of the monitored emission control systems, identifying the likely area of a malfunction by means of fault codes stored in computer memory, and illumination of the Malfunction Indicator (MI) to notify the operator of the vehicle;
Amendment 395 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 38
Article 3 – paragraph 2 – point 38
(38) ‘on-board monitoring system’ or ‘OBM’ means a system on board a vehicle that is capable of detecting either emission exceedances omonitoring emissions under wthen a vehicle is in zero emission mode if applicable, and capable of indicating the occurrence of such exceedances by means of information stored in the vehicle, and of communicating that consideration of OBM measurement tolerances and providing information via the OBD port and over the air;
Amendment 436 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 62
Article 3 – paragraph 2 – point 62
(62) ‘power-to-mass-ratio’ means the ratio of rated power to the mass in running ordertechnically permissible maximum laden mass as defined in Annex XII of Regulation (EU) 2021/535;
Amendment 454 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 71
Article 3 – paragraph 2 – point 71
Amendment 467 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 77
Article 3 – paragraph 2 – point 77
Amendment 472 #
2022/0365(COD)
Proposal for a regulation
Article 3 – paragraph 2 – point 78
Article 3 – paragraph 2 – point 78
Amendment 484 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 1
Article 4 – paragraph 1
1. Manufacturers shall ensure that the new vehicles they manufacture, which are sold, registered or put into service in the Union, are type approved in accordance with this Regulation. MAs from the specific application dates of this Regulation, manufacturers shall ensure that the new components or separate technical units, including engines, traction batteries, brake emission systems and replacement pollution control systems requiring type- approval which they manufacture and which are sold or put into service in the Union are type approved in accordance with this Regulation.
Amendment 492 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 2
Article 4 – paragraph 2
2. Manufacturers shall design, construct and assemble vehicles to comply with this Regulation, including complying with the emission limits set out in Annex I aund respecting the values declared in the certificate of conformity and in theer the conditions set out in Annex III and respecting type- approval documentation for the lifetime of the vehicle as set out in table 1 of Annex IV. These vehicles shall be designated as “Euro 7” vehicles.
Amendment 504 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 3 – subparagraph 1
Article 4 – paragraph 3 – subparagraph 1
When verifying compliance with the exhaust emission limits, where the testing is performed in one extended driving conditions, the emissions shall be divided by the extended driving divider set out in Annex III.
Amendment 508 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 4
Article 4 – paragraph 4
4. Manufacturers shall design and construct components or separate technical units, currently only including engines, traction batteries, brake systems and replacement pollution control systems to comply with this Regulation, including complying with the emission limits set out in Annex I and the conditions set out in Annex III.
Amendment 520 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 6 – point a
Article 4 – paragraph 6 – point a
(a) OBD systems capable of detecting malfunctioning systems which lead to exhaust emission exceedances in order to facilitate repairs;
Amendment 525 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 6 – point b
Article 4 – paragraph 6 – point b
(b) OBM systems capable of detecting emissions above the emission limits due to malfunctions, increased degradation or other situations that increase emissionmonitoring exhaust within the capability of OBM measurement tolerances;
Amendment 528 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 6 – point c
Article 4 – paragraph 6 – point c
(c) OBFCM device to monitor their real-world fuel and energy consumption and for vehicles of category N2 and N3 other relevant parameters such as payload/mass which are needed to determine their real-world fuel and energy efficiency;
Amendment 535 #
2022/0365(COD)
Proposal for a regulation
Article 4 – paragraph 6 – point g
Article 4 – paragraph 6 – point g
(g) devices communicating vehicle generated data together with the approval number and type approval variant used for compliance with this regulation and OBFCM data, for the purpose of periodic roadworthiness tests and technical roadside inspection over the air, and for the purposes of communicating with recharging infrastructure and stationary power systems capable of supporting smart and bidirectional charging functionalities and for the provision of third-party services to the vehicle user in order to improve the vehicle’s usage, limit the vehicle’s energy consumption, its emissions or to extend the life of its battery in use.
Amendment 562 #
2022/0365(COD)
Proposal for a regulation
Article 5 – paragraph 1
Article 5 – paragraph 1
Amendment 576 #
2022/0365(COD)
Proposal for a regulation
Article 5 – paragraph 2
Article 5 – paragraph 2
Amendment 580 #
2022/0365(COD)
Proposal for a regulation
Article 5 – paragraph 3
Article 5 – paragraph 3
3. Manufacturers may designate vehicles of category M1 and N1 as “Euro 7A vehicle” where those vehicles are equipped with adaptive control functions. The use of adaptive control functions shall be demonstrated to the type-approval authorities during type- approval and verified during the lifetime of the vehicle as set out in table 1, Annex IV.
Amendment 586 #
2022/0365(COD)
Proposal for a regulation
Article 5 – paragraph 4
Article 5 – paragraph 4
4. Manufacturers may designate vehicles of category M1 and N1 as “Euro 7G vehicle” where those vehicles are equipped with internal combustion engines with geofencing technologies. The manufacturer shall install a driver warning system on those vehicles to inform the user when the traction batteries are nearly empty and to stop the vehicle if not charged within 5 km from the first warning while on zero- emission mode. The application of such geofencing technologies may be verified during the lifetime of the vehicle.
Amendment 590 #
2022/0365(COD)
Proposal for a regulation
Article 5 – paragraph 4 a (new)
Article 5 – paragraph 4 a (new)
4a. Manufacturers may designate vehicles as “Euro 7 CNF vehicle” where those vehicles are fuelled by CO2 neutral fuels (CNF), either exclusively or with the carbon correction factor, over the vehicle lifetime. In the case of exclusive use of CNF by technical adjustments at the vehicle or filling station or by a fuel certification scheme, the CO2 emissions are considered zero for the purpose of Regulation (EU) 2019/631 and Regulation (EU) 2019/1242. The verification of the requirement of exclusive use of CNF by technical adjustments is in charge of the type- approval authority. In the second case, the CO2 emissions for the purpose of Regulation (EU) 2019/631 and Regulation (EU) 2019/1242 are calculated through the carbon correction factor (CCF). The Commission shall define the methodologies to calculate and apply the carbon correction factor by means of delegated acts no later than one year after the entry into force of this regulation.
Amendment 596 #
2022/0365(COD)
Proposal for a regulation
Article 5 – paragraph 5
Article 5 – paragraph 5
5. Manufacturers may construct vehicles combining two or more ofof category M1 and N1 combining the characteristics referred to in paragraphs 1, 2 or 33 and 4 and designate them using a combination of symbols and letters such as “Euro 7+A”, “Euro 7+G”, “Euro 7+AG” oras “Euro 7AG” vehicles.
Amendment 608 #
2022/0365(COD)
Proposal for a regulation
Article 6 – paragraph 2
Article 6 – paragraph 2
Amendment 614 #
2022/0365(COD)
Proposal for a regulation
Article 6 – paragraph 3
Article 6 – paragraph 3
3. Manufacturers shall ensure that OBFCM, OBD and OBM devices and anti- tampering measures installed in these vehicles comply with the provisions of this Regulationremain unchanged as long as the vehicle is in use.
Amendment 630 #
2022/0365(COD)
Proposal for a regulation
Article 6 – paragraph 6 – point b
Article 6 – paragraph 6 – point b
(b) communicating the data of the emission behaviour of the vehicle, including pollutant sensor and exhaust flow data, via the OBD port and over the air, including for the purpose of roadworthiness tests and technical roadside inspections55 ,56 or for the purpose of providing third-party services that assist the vehicle user in reducing emissions in use phase; _________________ 55 Directive 2014/47/ EU of the European Parliament and of the Council of 3 April 2014 on the technical roadside inspection of the roadworthiness of commercial vehicles circulating in the Union and repealing Directive 2000/30/EC (OJ L 127, 29.4.2014, p. 134). 56 Directive 2014/45/EU of the European Parliament and of the Council of 3 April 2014 on periodic roadworthiness tests for motor vehicles and their trailers and repealing Directive 2009/40/EC (OJ L 127, 29.4.2014, p. 129)
Amendment 645 #
2022/0365(COD)
Proposal for a regulation
Article 6 – paragraph 7
Article 6 – paragraph 7
7. The OBFCM devices installed by the manufacturer in these vehicles shall be capable of communicating thelegally appropriate and necessary vehicle data they record via the OBD port and over the air including but not limited to the provision of third-party services to the vehicle user.
Amendment 676 #
2022/0365(COD)
Proposal for a regulation
Article 7 – paragraph 4
Article 7 – paragraph 4
Amendment 689 #
2022/0365(COD)
Article7a Specific provisions relating to vehicle tires abrasion 1. Tyre classification and definitions for the purposes of abrasion emission type approval shall follow the uniform provisions developed in the UN concerning the approval of tyres with regard to Tyre Abrasion emissions Type Approval and be included in this Regulation through an implementing act as per article 14 paragraph 3. 2. Any derogation to these requirements should be developed in the UN and included in this Regulation by delegated act as per Article 15.
Amendment 703 #
2022/0365(COD)
Proposal for a regulation
Article 9 – paragraph 1
Article 9 – paragraph 1
Amendment 708 #
2022/0365(COD)
Proposal for a regulation
Article 9 – paragraph 2
Article 9 – paragraph 2
Amendment 722 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 3
Article 10 – paragraph 3
3. With effect from … [OP please insert the date = the date of entry into force of this Regulation]the publication of the implementing or delegated acts, where a manufacturer so requests, the national approval authorities shall not refuse to grant EU emission type-approval or national emission type-approval for a new type of vehicle or engine, or prohibit the registration, sale or entry into service of a new vehicle complying with this regulation.
Amendment 723 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 3 a (new)
Article 10 – paragraph 3 a (new)
3a. Starting 24 months after the entry into force of this Regulation, and following the relevant timeline and specific provisions for components, and separate technical units, national authorities shall, on grounds relating to CO2 and pollutant emissions, fuel and electric energy consumption or battery durability, refuse to grant EU emission type-approval or national emission type- approval with regard to new types of M1 vehicles which do not comply with this Regulation.
Amendment 725 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 3 b (new)
Article 10 – paragraph 3 b (new)
3b. Starting 36 months after the entry into force of this Regulation, and following the relevant timeline and specific provisions for components, and separate technical units, national authorities shall, on grounds relating to CO2 and pollutant emissions, fuel and electric energy consumption or battery durability, refuse to grant EU emission type-approval or national emission type- approval with regard to new types of N1 vehicles which do not comply with this Regulation.
Amendment 732 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 4
Article 10 – paragraph 4
4. With effect from 1 July 202536 months after entry into force of this Regulation, and following the relevant timeline and specific provisions for components, and separate technical units, national authorities shall, in the case of new M1, N1 vehicles which do not comply with this Regulation consider certificates of conformity to be no longer valid for the purposes of registration and shall, on grounds relating to CO2 and pollutant emissions, fuel and energy consumption or battery durability, prohibit the registration, sale or entry into service of such vehicles.
Amendment 739 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 4 a (new)
Article 10 – paragraph 4 a (new)
4a. As of 48 months after entry into force of this Regulation, and following the relevant timeline and specific provisions for components, and separate technical units, national authorities shall, in the case of new N1 vehicles not complying with this Regulation, consider certificates of conformity to be no longer valid for the purposes of registration and shall, on grounds relating to CO2 and pollutant emissions, fuel and electric energy consumption or battery durability, prohibit the registration, sale or entry into service of such vehicles.
Amendment 746 #
2022/0365(COD)
5. With effect from 1 July 2027, national authorities shall, As of 48 months after entry into force of this Regulation, and following the case of new M2, M3, N2, N3 vehicles and new O3, O4 trailers, which do not comply with this Regulation consider certificates of conformity to be no longer valid for the purposes of registration andrelevant timeline and specific provisions for components, and separate technical units, national authorities shall, on grounds relating to CO2 and pollutant emissions, fuel and electric energy consumption, energy efficiency or battery durability, prohibit the registration, srefuse to grant EU emission type-approvale or entry into service of such vehiclesnational emission type-approval in the case of new types of M2, M3, N2, N3 vehicles and new O3, O4 trailers which do not comply with this Regulation.
Amendment 755 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 5 a (new)
Article 10 – paragraph 5 a (new)
5a. As of 60 months after entry into force of this Regulation, and following the relevant timeline and specific provisions for components, and separate technical units, national authorities shall, in the case of new M2, M3, N2, N3 vehicles and new O3, O4 trailers not complying with this Regulation, consider certificates of conformity to be no longer valid for the purposes of registration and shall, on grounds relating to CO2 and pollutant emissions, fuel and energy consumption, energy efficiency or battery durability, prohibit the registration, sale or entry into service of such vehicles.
Amendment 767 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 6
Article 10 – paragraph 6
6. With effect from 1 July 20305, national authorities shall, in the case of new M1, N1 vehicles constructed by small volume manufacturers which do not comply with this Regulation consider certificates of conformity to be no longer valid for the purposes of registration and shall, on grounds relating to CO2 and pollutant emissions, fuel and energy consumption, energy efficiency or battery durability, prohibit the registration, sale or entry into service of such vehicles.
Amendment 776 #
2022/0365(COD)
Proposal for a regulation
Article 10 – paragraph 8
Article 10 – paragraph 8
8. The Commission shall adopt implementing acts laying down the administrative and technical elements required for performing tests, checks and inspections for the purposes of verifying compliance with paragraph 1, as well as the technical elements required for market surveillance checks under paragraph 2. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 17(2) and shall enter into force at least [3] years before the applicable dates in Article 10 (4) and (5).
Amendment 787 #
2022/0365(COD)
Proposal for a regulation
Article 11 – paragraph 1
Article 11 – paragraph 1
1. With effect from 1 July 202536 months after entry into force of this Regulation, the sale or installation of a system, component or separate technical unit intended to be fitted on an M1, N1 vehicle approved under this Regulation, shall be prohibited if the system, component and separate technical unit is not of type approved in compliance with this Regulation.
Amendment 791 #
2022/0365(COD)
Proposal for a regulation
Article 11 – paragraph 1 a (new)
Article 11 – paragraph 1 a (new)
Amendment 799 #
2022/0365(COD)
Proposal for a regulation
Article 11 – paragraph 2
Article 11 – paragraph 2
2. With effect from 1 July 202760 months after entry into force of this Regulation,, the sale or installation of a system, component or separate technical unit intended to be fitted on an M2, M3, N2, N3 vehicle approved under this Regulation, shall be prohibited if the system, component and separate technical unit is not type approved in compliance with this Regulation.
Amendment 806 #
2022/0365(COD)
Proposal for a regulation
Article 11 – paragraph 3 a (new)
Article 11 – paragraph 3 a (new)
Amendment 834 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 3 – point e
Article 14 – paragraph 3 – point e
(e) anti-tampering, security and cybersecurity systems and security;
Amendment 837 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 3 – point g
Article 14 – paragraph 3 – point g
(g) brake system types and their replacement parts; specifically for the different vehicle categories that also take into account other on-vehicle systems that contribute to vehicle braking and braking of trailers;
Amendment 844 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 3 – point h
Article 14 – paragraph 3 – point h
(h) tyre types in respect to tyre abrasion as defined by the pertinent UN WP29 Regulation;
Amendment 860 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 4 – subparagraph 1 – point a
Article 14 – paragraph 4 – subparagraph 1 – point a
(a) for vehicles under the scope of Regulation (EC) 715/2007, the methods to measure exhaust emissions in the lab and on the road, including random and worst-casemeasures against biased driving and misuse during RDE test cyclesing, the use of portable emissions measurement systems for verifying real driving emissions, and idle emissions;
Amendment 869 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 4 – subparagraph 1 – point a a (new)
Article 14 – paragraph 4 – subparagraph 1 – point a a (new)
(aa) for vehicles under the scope of Regulation (EC) 595/2009, to carry-over all laboratory and in-service conformity (ISC-PEMS) test procedures laid down in that Regulation and its subsequent amendments;
Amendment 878 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 4 – subparagraph 1 – point g
Article 14 – paragraph 4 – subparagraph 1 – point g
(g) the methods to measure brake particle emissions, including methods for HDV, real driving brake particle emissions on the basis of the completed UNECE GTR for M1 and N1 vehicles and to carry out an expansive inter-laboratory test program to determine the baseline for M1 and N1 vehicle brake wear emissions from which proportional brake wear limits can be considered, a similar approach for HDV when an appropriate test method has first been developed at UNECE level and regenerative braking;
Amendment 888 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 4 – subparagraph 1 – point h
Article 14 – paragraph 4 – subparagraph 1 – point h
(h) the methods to measure tyre abrasion in order to monitor tyre abrasion ratesrates in line with the relevant UN WP29 Regulation;
Amendment 894 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 4 – subparagraph 1 – point j
Article 14 – paragraph 4 – subparagraph 1 – point j
(j) OBFCM device, OBD and OBM systems, including compliance thresholds, performance requirements and tests, methods to ensure performance of sensors and over the air communication of data recorded by these devices and systems;
Amendment 906 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 4 – subparagraph 1 – point r
Article 14 – paragraph 4 – subparagraph 1 – point r
(r) specifications of reference fuels for testing that include in the Fuel Quality Directive 98/70/EC an improved environmental specification for market fuels to enable exhaust pollutant reduction;
Amendment 912 #
2022/0365(COD)
Proposal for a regulation
Article 14 – paragraph 4 – subparagraph 1 – point t
Article 14 – paragraph 4 – subparagraph 1 – point t
Amendment 931 #
2022/0365(COD)
Proposal for a regulation
Article 15 – paragraph 1
Article 15 – paragraph 1
Amendment 950 #
2022/0365(COD)
Amendment 992 #
2022/0365(COD)
Proposal for a regulation
Article 19 – paragraph 1
Article 19 – paragraph 1
Regulation (EC) 715/2007 is repealed with effect from 1 July 20257.
Amendment 999 #
2022/0365(COD)
Proposal for a regulation
Article 19 – paragraph 2
Article 19 – paragraph 2
Regulation (EC) 595/2009 is repealed with effect from 1 July 20279.
Amendment 1008 #
2022/0365(COD)
Proposal for a regulation
Article 20 – paragraph 2
Article 20 – paragraph 2
It shall apply from 1 July 2025 for M1,24 months after entry into force of this Regulation for M1 vehicles, from 36 months after entry into force of this Regulation for N1 vehicles and components and separate technical units for those vehicles and from 1 July 202748 months after entry into force of this Regulation for M2, M3, N2, N3 vehicles and components and separate technical units for those vehicles and O3, O4 trailers.
Amendment 1017 #
2022/0365(COD)
Proposal for a regulation
Article 20 – paragraph 3
Article 20 – paragraph 3
It shall apply from 1 July 20305 for M1, N1 vehicles constructed by small volume manufacturers.
Amendment 1021 #
2022/0365(COD)
paragraph 6 of UN Global Technical Regulation 21
2 Measured in accordance with paragraph 5.3.2. of UN/ECE Regulation No 85 in the case of ICEVs and PEVs, or, in all other cases, measured in accordance with one of the test procedures laid down in
paragraph 6 of UN Global Technical Regulation 21
paragraph 6 of UN Global Technical Regulation 21
Euro 7 exhaust emission limits for M1, N1 vehicles with internal combustion engine Pollutant M1, N1 Only for N1 Emission Emission emissions vehicles vehicles with budget for all budget for all power to mass trips less than trips less than ratio1 less than 10 km for 10 km only for 3540 kW/t M1,N1 forN1 vehicles vehicles with power to mass ratio less than 3540 kW/t
Amendment 1028 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 1 – Row 3
Annex I – Table 1 – Row 3
Amendment 1034 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 1 – Row 4
Annex I – Table 1 – Row 4
Euro 7 exhaust emission limits for M1, N1 vehicles with internal combustion engine Pollutant Emission Emission emissions budget for all budget for all Only for N1 trips less than trips less than vehicles with 10 km for M1, 10 km only for M1, N1 vehicles power to mass N1 vehicles N1 vehicles with ratio256 less than power to mass 35 kW/t ratio less than 35 kW/t per km per km per trip per trip PM in mg 4.5 4.5 45 45 50
Amendment 1042 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 1 – Row 6
Annex I – Table 1 – Row 6
Euro 7 exhaust emission limits for M1, N1 vehicles with internal combustion engine Pollutant Emission Emission emissions budget for all budget for all Only for N1 trips less than trips less than vehicles with 10 km for M1, 10 km only for M1, N1 vehicles power to mass N1 vehicles N1 vehicles with ratio2930 less than power to mass 35 kW/t ratio less than 35 kW/t per km per km per trip per trip CO in mg 500 63740 5000 6300 7400
Amendment 1050 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 1 – Row 7
Annex I – Table 1 – Row 7
36 Measured in accordance with paragraph 5.3.2. of UN/ECE Regulation No 85 in the case of ICEVs and PEVs, or, in all other cases, measured in accordance with one of the test procedures laid down in paragraph 6 of UN Global Technical Regulation 21 37 Measured in accordance with paragraph 5.3.2. of UN/ECE Regulation No 85 in the case of ICEVs and PEVs, or, in all other cases, measured in accordance with one of the test procedures laid down in paragraph 6 of UN Global Technical Regulation 21 Euro 7 exhaust emission limits for M1, N1 vehicles with internal combustion engine Pollutant Emission Emission emissions budget for all budget for all Only for N1 trips less than trips less than vehicles with 10 km for M1, 10 km only for M1, N1 vehicles power to mass N1 vehicles N1 vehicles with ratio378 less than power to mass 35 kW/t ratio less than 35 kW/t per km per km per trip per trip THC in mg 100 1360 1000 13600
Amendment 1057 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 1 – Row 8
Annex I – Table 1 – Row 8
Euro 7 exhaust emission limits for M1, N1 vehicles with internal combustion engine Pollutant Emission Emission emissions Only for N1 budget for all budget for all Only for N1 trips less than trips less than vehicles with 10 km for M1, 10 km only for M1, N1 vehicles power to mass N1 vehicles N1 vehicles with ratio45 less than power to mass 35 kW/t vehicles with trips less than trips less than M1, N1 vehicles power to mass 10 km for M1, 10 km only for ratio46 less than N1 vehicles N1 vehicles with 35 kW/t power to mass ratio less than 45 Measured in accordance with paragraph 5.3.2. of UN/ECE Regulation No 85 in the case of ICEVs and PEVs, or, in all other cases, measured in accordance with one of the test procedures laid down in paragraph 6 of UN Global Technical Regulation 21 46 ratio less thanMeasured in accordance with paragraph 5.3.2. of UN/ECE Regulation No 85 in the case of ICEVs and PEVs, or, in all other cases, measured in accordance with one of the test procedures laid down in paragraph 6 of UN Global Technical Regulation 21 35 kW/t per km per km per trip per trip NMHC in mg 68 90 108 680 900 1080
Amendment 1064 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 1 – Row 9
Annex I – Table 1 – Row 9
Euro 7 exhaust emission limits for M1, N1 vehicles with internal combustion engine Pollutant Emission Emission emissions budget for all budget for all Only for N1 trips less than trips less than vehicles with 10 km for M1, 10 km only for M1, N1 vehicles power to mass N1 vehicles N1 vehicles with ratio512 less than power to mass 35 kW/t ratio less than 35 kW/t per km per km per trip per trip NH3 in mg 20 20 - 200 200 -
Amendment 1079 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 2
Annex I – Table 2
Amendment 1124 #
2022/0365(COD)
Proposal for a regulation
Annex I – Table 5
Annex I – Table 5
Amendment 1171 #
2022/0365(COD)
Proposal for a regulation
Annex II – Table 2 – Section I – Row 1
Annex II – Table 2 – Section I – Row 1
Euro 7 Minimum performance requirements (MPR) for battery durability for NM1 vehicles Battery energy based Start of life to 5 Vehicles more than Start of life to 8 years Vehicles up to MPR years or 1060 000 km 5 years or 100 000 additional lifetime whichever comes km, and up to first whichever comes first of 8 years or 160 000 kmfirst OVC-HEV 75% 65% PEV 75% 65%
Amendment 1203 #
2022/0365(COD)
Proposal for a regulation
Annex III – Table 1 – row 2
Annex III – Table 1 – row 2
Conditions for testing compliance of M1, N1 vehicles with exhaust emission limits with any market fuel and lubricant within the specifications issued by the manufacturer of the vehicle Parameter Normal driving Extended driving conditions* conditions - 1.6 (applies to measured Extended driving emissions only during the time divider when one of the conditions set Extended driving out in this column applies; and in divider the case two or more conditions are met, that partof the trip shall be excluded and set invalid)
Amendment 1218 #
2022/0365(COD)
Proposal for a regulation
Annex III – Table 1 – row 2
Annex III – Table 1 – row 2
Conditions for testing compliance of M1, N1 vehicles with exhaust emission limits with any market fuel and lubricant within the specifications issued by the manufacturer of the vehicle Parameter Normal driving Extended driving conditions* conditions Trip composition Any - - Biased and rare driving Biased and rare driving conditions are not conditions are not allowed allowed
Amendment 1228 #
2022/0365(COD)
Proposal for a regulation
Annex III – Table 2
Annex III – Table 2
Conditions for testing compliance of M1, N1 vehicles with exhaust emission limits with any market fuel and lubricant within the specifications issued by the manufacturer of the vehicle Parameter Normal driving conditions Extended driving for reference Ambient According to paragraph 4.2 of Annex 8 to conditions* - 2 (applies to measured Extended Driving emissions only during the time DividerCovering -7°C to temperature UN-ECE Regulation No.49-07 when one of the conditions set 38°C out According this column applies) Ambient -7°C to 35°C -10°C to -7°C or 35°C to 45°C temperature o paragraph 4.2 of Annex 8 to Maximum altitude 1 600 m From 1 600 to 1 800 m Not allowed 1700 meters UN-ECE Regulation No.49-07 Allowed according to Towing/aerodynami manufacturer specifications c modifications and up to the regulated speed Vehicle Payload Higher or equal than 10% Less than 10% Auxiliaries Possible as per normal use - Internal Combusparagraph 4.1 of Annex 8 to Vehicle payload ≥ 10% UN-ECE Regulation No.49-07 According to paragraph 4.5 of Annex 8 to Trip composition Any - Engine Loading at cold start Trip composition As per usual use Urban / rural / UN-ECE Regulation No.49-07 - 5 000 km for <16t TPMLM Between 3 000 km and 5 000 10 000 km for > 16t TPMLM km for <16t TPMLM motorway According to paragraph 3.2 of Annex 8 to Minimum mileage Between 3 000 km and 10 00025,000 km UN- km for > 16t TPMLMECE Regulation No.49-07
Amendment 1254 #
2022/0365(COD)
Proposal for a regulation
Annex III – Table 5
Annex III – Table 5