BETA


2010/0195(COD) Air quality: provisions for engines placed on the market under the flexibility scheme

Progress: Procedure completed

RoleCommitteeRapporteurShadows
Lead ENVI PIETIKÄINEN Sirpa (icon: PPE PPE) POC Pavel (icon: S&D S&D)
Committee Opinion TRAN SEHNALOVÁ Olga (icon: S&D S&D) Michael CRAMER (icon: Verts/ALE Verts/ALE), Jaromír KOHLÍČEK (icon: GUE/NGL GUE/NGL), Gesine MEISSNER (icon: ALDE ALDE)
Committee Opinion ITRE
Lead committee dossier:
Legal Basis:
TFEU 114-p1

Events

2011/11/30
   EC - Commission response to text adopted in plenary
Documents
2011/11/23
   Final act published in Official Journal
Details

PURPOSE: to amend Directive 97/68/EU and adapt the rules applicable to the flexibility scheme provided for in that Directive in order to help engine manufacturers in view of the temporary difficulty faced by the manufacturing sector.

LEGISLATIVE ACT: Directive 2011/88/EU of the European Parliament and of the Council amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme.

CONTENT: following an agreement at first reading with the European Parliament, the Council adopted a directive amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme in order to help engine manufacturers to adapt progressively to stricter environmental requirements and cope with the difficulties resulting from the financial crisis. The Danish delegation voted against.

Directive 97/68/EC regulates the maximum exhaust emissions of carbon oxide (CO), hydrocarbons (HC) nitrogen oxides (HC), nitrogen oxides (NOx) and particulates (PM) from diesel engines installed in non-road mobile machinery and contributes to the protection of human health and the environment.

Directive 97/68/EC also provided that emission limits applicable to type approval of the majority of diesel engines under Stage IIIA were to be replaced by the more stringent limits under Stage IIIB. Those limits apply form 1 January 2010 as regards the type approval for these engines and from 1 January 2011 with regard to their placing on the market.

The flexibility scheme allows equipment manufacturers to purchase, during the emissions stage in force, a limited number of engines that do not comply with the emissions limits applicable during that stage, but which are approved in accordance with the requirements of that stage immediately preceding the applicable one.

The new Directive amends the provisions of the flexibility scheme provided for in Directive 97/68/EC:

· by increasing the percentage of engines which can be placed on the market while complying with the previous stage emission limits, from 20% to 37.5% of the manufacturer’s annual sales;

· by extending such flexibility to engines used in locomotives;

· by providing for a limited exemption for replacement engines in railcars and locomotives.

Authorisations may be granted only in cases where the approval authority of the Member State is satisfied that the use of a replacement engine that meets the requirements of the latest applicable emissions stage in the railcar or locomotive in question will involve significant technical difficulties.

A label bearing the text “REPLACEMENT ENGINE” and bearing the unique reference of the associated derogation shall be affixed to engines covered by this provision.

The Commission shall assess the environmental impacts of, and possible technical difficulties in respect of compliance. In the light of that assessment, it shall, by 31 December 2016, submit a report accompanied, if appropriate, by a legislative proposal including an end date for the application of that provision.

The revision of Directive 97/68/EC : in order to ensure that the revised Directive is in line with Union standards for good air quality, and in the light of experience, scientific findings and available tech­nologies, the Commission should, in the upcoming revision of Directive 97/68/EC and subject to impact assessment, consider:

· establishing a new emission stage – Stage V – that should be based, subject to technical feasibility, on the requirements of Euro VI standards for heavy- duty vehicles ;

· introducing new requirements for the reduction of particulate matter, namely a particulate number limit that applies for all compression ignition engine categories, where technically feasible, so ast o ensure an effective reduction of ultra-fine particles ;

· taking a comprehensive approach to promoting emission-reducing provisions and retrofitting of after-treatment systems on the existing fleet of non- road mobile machinery ;

· establishing a method providing for the periodic testing of non-road mobile machinery and vehicles, in particular to establish whether their emissions performance complies with the values given at registration;

· the possibility of authorising, under certain conditions, replacement engines that do not comply with Stage III A requirements for railcars and locomotives ;

· the possibility of harmonising the specific emission standards for rail with relevant standards at international level so as to ensure the availability of affordable engines that comply with the emission limits set.

ENTRY INTO FORCE: 13/12/2011.

TRANSPOSITION: 24/11/2012.

2011/11/16
   CSL - Draft final act
Documents
2011/11/16
   CSL - Final act signed
2011/11/16
   EP - End of procedure in Parliament
2011/11/08
   EP/CSL - Act adopted by Council after Parliament's 1st reading
2011/11/08
   CSL - Council Meeting
2011/10/25
   EP - Results of vote in Parliament
2011/10/25
   EP - Decision by Parliament, 1st reading/single reading
Details

The European Parliament adopted by 572 votes to 68, with 14 abstentions, a legislative resolution on the proposal for a directive of the European Parliament and of the Council amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme.

Parliament adopted its position at first reading, under the ordinary legislative procedure. The amendments adopted in plenary are the result of a compromise negotiated between the European Parliament and the Council. They amend the Commission proposal as follows:

Percentage of engines : a recital states that during Stage III B, the maximum number of engines used for applications other than the propulsion of railcars, locomotives and inland waterways vessels that may be placed on the market under the flexibility scheme should be increased, in each engine category, from 20% to 37.5% of the annual quantity of equipment with engines in that category that is placed on the market by the equipment manufacturer.

An optional alternative of placing a fixed number of engines on the market under the flexibility scheme should be available. That fixed number of engines should also be revised and should not exceed the ceilings laid down in section 1.2.2 of Annex XIII to Directive 97/68/EC.

Railcars : the amended text stipulates that railcars should be left out the flexibility scheme, as legislated in directive 2004/26/EC.

By way of derogation , Member States may authorise the placing on the market of the following engines for railcars and locomotives :

(a) replacement engines that meet the Stage III A limits , where they are to replace engines for railcars and locomotives that: (i) do not meet the Stage III A standard; or (ii) meet the Stage III A standard but do not meet the Stage III B standard;

(b) replacement engines that do not meet Stage III A limits , where they are to replace engines for railcars without driving control and not capable of independent movement, so long as such replacement engines meet a standard no lower than the standard met by engines fitted to existing railcars of the same type.

Authorisations under this paragraph may be granted only in cases where the approval authority of the Member State is satisfied that the use of a replacement engine that meets the requirements of the latest applicable emissions stage in the railcar or locomotive in question will involve significant technical difficulties.

A label bearing the text “REPLACEMENT ENGINE” and bearing the unique reference of the associated derogation shall be affixed to engines covered by this Directive.

The Commission shall assess the environmental impacts of, and possible technical difficulties in respect of compliance. In the light of that assessment, the Commission shall, by 31 December 2016 , submit to the European Parliament and the Council a review accompanied, if appropriate, by a legislative proposal including an end date for the application of that provision.

Limited period : the rules applicable to the flexibility scheme should be adapted to extend the application of that scheme to engines for use in the propulsion of locomotives for a strictly limited period of time

Support programmes to enterprises : enterprises operating with machines that fall within the scope of this Directive should benefit from European financial support programmes or any relevant support programmes provided by Member States. Those support programmes should be aimed at favouring the early introduction of the highest emission standards.

Revision of Directive 97/68/EC : in order to ensure that the revised Directive is in line with Union standards for good air quality, and in the light of experience, scientific findings and available technologies, the Commission should, in the upcoming revision of the Directive 97/68/EC and subject to impact assessment, consider:

establishing a new emission stage - Stage V - that should be based, subject to technical feasibility, on the requirements of Euro VI standards for heavy-duty vehicles; introducing new requirements for the reduction of particulate matter, namely a particulate number limit that applies for all compression ignition engine categories, where technically feasible, so as to ensure an effective reduction of ultra-fine particles; taking a comprehensive approach to promoting emission-reducing provisions and retrofitting of after-treatment systems on the existing fleet of non-road mobile machinery on the basis of the currently ongoing discussions under the auspices of the United Nations Economic Commission for Europe regarding harmonised requirements for retrofit emission control devices; this approach should support Member States' efforts to improve air quality and to promote the protection of workers; establishing a method providing for the periodic testing of non-road mobile machinery and vehicles, in particular to establish whether their emissions performance complies with the values given at registration; the possibility of authorising, under certain conditions, replacement engines that do not comply with Stage III A requirements for railcars and locomotives; the possibility of harmonising the specific emission standards for rail with relevant standards at international level so as to ensure the availability of affordable engines that comply with the emission limits set.

The text stipulates that the current global financial and economic crisis or any conjunctural economic fluctuations should not lead to a lowering of environmental standards. This revision of Directive 97/68/EC should therefore be considered to be exceptional.

Documents
2011/03/29
   EP - Committee report tabled for plenary, 1st reading/single reading
Documents
2011/03/29
   EP - Committee report tabled for plenary, 1st reading/single reading
Documents
2011/03/16
   EP - Vote in committee, 1st reading/single reading
Details

The Committee on the Environment, Public Health and Food Safety adopted the report drafted by Sirpa PIETIKÄINEN (EPP, FI) on the proposal for a directive of the European Parliament and of the Council amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme.

It recommends that the European Parliament’s position adopted at first reading, under the ordinary legislative procedure, amends the Commission proposal as follows:

Definitions : there is no precise definition of exhaust after-treatment systems for particle reduction which reflects the state of the art. There is no clear definition in EU law, causing interpretation difficulties for authorities and manufacturers.

Percentage of engines : during Stage III B, the percentage of the number of engines used for application other than propulsion of railcars, locomotives and inland waterways vessels placed on the market under the flexibility scheme, should be increased from 20% to 30% of the equipment manufacturer's annual quantity of equipment placed on the market with engines in that category.

Railcars : railcars should be left out the flexibility scheme, as legislated in directive 2004/26/EC. The report states that Stage III B - compliant railcars exist already, and the engine solutions are there. The railcars are mostly "borrowing" engines from heavy duty vehicles, for which IIIB solutions exist.

Replacement engines : a replacement engine to be installed in a railcar or locomotive originally equipped with an engine that does not meet Stage III A limits or only meets Stage III A limits shall, as a minimum,

comply with the limit values defined in Stage III A, where:

the application of Stage III B requirements would give rise to significant technical difficulties in terms of gauge, axle load, body/chassis design or engine(s) control systems for multiple operation and, as a consequence, compromise the economic viability of the project; or no Stage III B engines that could be fitted into such a railcar or locomotive are available.

By way of derogation, Member States may authorise the production and mounting of replacement engines that do not comply with Stage III A requirements. Any such derogation shall only be made under strict controls and limitations and with detailed justifications.

Placing on the market : engines may be placed on the market under the flexibility scheme from the date when Stage IIIB becomes applicable until the end of that Stage, but not longer than three years from the beginning of that Stage.

The revision of Directive 97/68/EC : in order to ensure the revised Directive is in line with the EU standards for good air quality, and in the light of experience, scientific findings and available technologies, the Commission should, in the upcoming revision of Directive 97/68/EC, subject to impact assessment:

propose the establishment of a new emission stage - Stage V - that should be aligned with the requirements of Euro VI standards for heavy duty vehicles; introduce new requirements for the reduction of particulate matter, namely a particulate number (PN) limit that applies for all engine categories so as to ensure an effective reduction of ultra-fine particles; define a comprehensive approach to promote emission-reducing provisions and retrofitting of after-treatment systems on the existing NRMM fleet on the basis of discussions, on harmonised requirements for retrofit emission control devices, that are currently ongoing under the auspices of United Nations Economic Commission for Europe (UNECE); introduce a method providing for the periodic testing of mobile machinery and vehicles to establish whether their emissions performance complies with the values given at registration; look into the possibility of harmonising the specific emission standards for rail with the North American EPA standards so as to ensure the availability of affordable engines complying with the emission limit values set.

2011/02/23
   EP - Amendments tabled in committee
Documents
2011/01/26
   EP - Committee opinion
Documents
2011/01/11
   EP - Committee draft report
Documents
2010/10/05
   PT_PARLIAMENT - Contribution
Documents
2010/10/01
   IT_SENATE - Contribution
Documents
2010/09/16
   ESC - Economic and Social Committee: opinion, report
Documents
2010/09/09
   EP - PIETIKÄINEN Sirpa (PPE) appointed as rapporteur in ENVI
2010/09/07
   EP - Committee referral announced in Parliament, 1st reading/single reading
2010/09/02
   EP - SEHNALOVÁ Olga (S&D) appointed as rapporteur in TRAN
2010/07/07
   EC - Document attached to the procedure
2010/07/07
   EC - Document attached to the procedure
2010/07/07
   EC - Legislative proposal published
Details

PURPOSE: to amend Directive 97/68/EC and adapt the rules applicable to the flexibility scheme provided for in that directive in order to extend the application of that scheme to engines for use in propulsion of railcars and locomotives.

PROPOSED ACT: Directive of the European Parliament and of the Council.

BACKGROUND: it is recalled that Directive 97/68/EC regulates the maximum exhaust emissions carbon oxide (CO), hydrocarbons (HC), nitrogen oxides (NOx) and particulates (PM) from diesel engines installed in construction, agricultural and forestry machinery, railcars & locomotives, inland waterway vessels, constant speed engines and small petrol engines used in different types of machinery. The Directive provides for emissions limit stages of increasing stringency with corresponding compliance dates. Manufacturers must ensure that new engines comply with these limits in order that they can be placed on the market.

Directive 2004/26/EC introduced the current applicable stage of emission limits for the majority of diesel engines referred to as Stage III A. These limits will be replaced by the more stringent Stage III B limits progressively as of 1st January 2011. The type approval period for these engines started on 1 January 2010. A great diversity of machinery production (approximately 1500 companies in the EU) is affected.

To comply with Stage III B limits, current engines will need to be substantially modified. Changes to the configuration, size or weight of engines have a knock-on effect for Original Equipment Manufacturers (OEM) who will have to adapt the design of their machines in order to accommodate the modified engines. This process can only start once the engine is fully developed. Technical solutions for complying III B engines are not yet finalised. Thus, OEMs are not in a position to fully redesign the machinery where the engine is to be installed. In addition, compliance costs for manufacturers to cope with the new emission limits are significant. Directive 2004/26/EC also introduced the flexibility scheme to facilitate the transition between the different emission stages. The flexibility scheme allows the OEM to place on the market, during the period between two successive stages of exhaust emissions limit values, a limited number of non-road mobile machines which are fitted with engines that still comply with the exhaust emission limits of the previous stage. The flexibility scheme applies to compression ignition (diesel) engines used in construction, agricultural and forestry machinery, generator sets and pumps using constant speed engines, but not to locomotives, railcars and inland waterway vessels.

IMPACT ASSESSMENT: a detailed Impact Assessment has been carried out on the basis of technical studies and a stakeholder consultation. It covers the different scenarios for engines covered by the existing flexibility scheme and identifies the need to include railcars. In addition to the conclusions of the Impact Assessment, locomotives have been added to the flexibility scheme.

The Impact Assessment analyses different options ranging from the implementation of a scrapping scheme, variations of the flexibility scheme as regards the allowed percentage/number of engines to the set-up of a trading system whereby firms that would not use the entire flexibility could sell their flexibility rights to firms that need additional flexibility. The use of a scrapping scheme has been discarded as it is not suitable for assisting OEMs in financing R&D to make Stage III B machinery available. The set-up of a flexibility trading system was considered as a too complex system in a short time scale and thus disproportionate to the expected results. The option of increasing the existing flexibility scheme and extending it to sectors not yet included has been considered as the best option, balancing the environmental impact and an economic benefit in saved compliance costs for a limited period of time.

LEGAL BASE: Article 114 of the Treaty on the Functioning of the EU. the proposal makes the following amendments to Directive 97/68/EC:

CONTENT: it is proposed to modify the provisions of the flexibility scheme to mitigate further the economic costs of the transition of emission Stages III A to III B by extending its application for some type of non-road mobile machinery while maintaining the entry into force of the exhaust emission limit Stage III B to preserve the objective of the Directive of reducing emissions of gaseous and particulate pollutants in the Union. In addition, some engine manufacturers have progressed in developing compliant IIIB engines for locomotives while OEMs will yet not be entirely ready to place III B compliant locomotives on the market by 1st January 2012 as provided for in the Directive Therefore it appeared necessary to apply the flexibility scheme also to locomotives.

The main amendments to the Directive are as follows:

an increase of the percentage of the number of engines used for application in land based machines, placed on the market under the flexibility scheme in each engine category from 20% to 50% of the OEM’s annual sales of equipment and an adaptation of the maximum number of engines that may be placed on the market under the flexibility scheme as an optional alternative, in the period between emission Stage III A to emission Stage III B; inclusion of engines used for the propulsion of railcars and locomotives in the flexibility scheme providing the possibility for the OEM to place on the market a limited number of engines under the flexibility scheme; these measures will expire on 31 December 2013.

FINANCIAL IMPLICATIONS: the proposal has no implication for the Union’s budget.

Documents

Activities

AmendmentsDossier
114 2010/0195(COD)
2010/11/16 TRAN 16 amendments...
source: PE-452.811
2011/02/23 ENVI 98 amendments...
source: PE-458.785

History

(these mark the time of scraping, not the official date of the change)

committees/0
type
Responsible Committee
body
EP
associated
False
committee_full
Environment, Public Health and Food Safety
committee
ENVI
rapporteur
name: PIETIKÄINEN Sirpa date: 2010-09-09T00:00:00 group: European People's Party (Christian Democrats) abbr: PPE
shadows
name: POC Pavel group: Progressive Alliance of Socialists and Democrats abbr: S&D
committees/0
type
Responsible Committee
body
EP
associated
False
committee_full
Environment, Public Health and Food Safety
committee
ENVI
date
2010-09-09T00:00:00
rapporteur
name: PIETIKÄINEN Sirpa group: European People's Party (Christian Democrats) abbr: PPE
shadows
name: POC Pavel group: Progressive Alliance of Socialists and Democrats abbr: S&D
committees/2
type
Committee Opinion
body
EP
associated
False
committee_full
Transport and Tourism
committee
TRAN
rapporteur
name: SEHNALOVÁ Olga date: 2010-09-02T00:00:00 group: Progressive Alliance of Socialists and Democrats abbr: S&D
committees/2
type
Committee Opinion
body
EP
associated
False
committee_full
Transport and Tourism
committee
TRAN
date
2010-09-02T00:00:00
rapporteur
name: SEHNALOVÁ Olga group: Progressive Alliance of Socialists and Democrats abbr: S&D
docs/6/docs/0/url
Old
http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A7-2011-80&language=EN
New
http://www.europarl.europa.eu/doceo/document/A-7-2011-0080_EN.html
docs/8/body
EC
events/3/docs/0/url
Old
http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A7-2011-80&language=EN
New
http://www.europarl.europa.eu/doceo/document/A-7-2011-0080_EN.html
events/5/docs/0/url
Old
http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P7-TA-2011-452
New
http://www.europarl.europa.eu/doceo/document/TA-7-2011-0452_EN.html
activities
  • date: 2010-07-07T00:00:00 docs: url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2010&nu_doc=362 title: COM(2010)0362 type: Legislative proposal published celexid: CELEX:52010PC0362:EN body: EC commission: DG: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry Commissioner: TAJANI Antonio type: Legislative proposal published
  • date: 2010-09-07T00:00:00 body: EP type: Committee referral announced in Parliament, 1st reading/single reading committees: body: EP shadows: group: S&D name: POC Pavel responsible: True committee: ENVI date: 2010-09-09T00:00:00 committee_full: Environment, Public Health and Food Safety rapporteur: group: PPE name: PIETIKÄINEN Sirpa body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE body: EP responsible: False committee: TRAN date: 2010-09-02T00:00:00 committee_full: Transport and Tourism rapporteur: group: S&D name: SEHNALOVÁ Olga
  • date: 2011-03-16T00:00:00 body: EP committees: body: EP shadows: group: S&D name: POC Pavel responsible: True committee: ENVI date: 2010-09-09T00:00:00 committee_full: Environment, Public Health and Food Safety rapporteur: group: PPE name: PIETIKÄINEN Sirpa body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE body: EP responsible: False committee: TRAN date: 2010-09-02T00:00:00 committee_full: Transport and Tourism rapporteur: group: S&D name: SEHNALOVÁ Olga type: Vote in committee, 1st reading/single reading
  • date: 2011-03-29T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A7-2011-80&language=EN type: Committee report tabled for plenary, 1st reading/single reading title: A7-0080/2011 body: EP committees: body: EP shadows: group: S&D name: POC Pavel responsible: True committee: ENVI date: 2010-09-09T00:00:00 committee_full: Environment, Public Health and Food Safety rapporteur: group: PPE name: PIETIKÄINEN Sirpa body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE body: EP responsible: False committee: TRAN date: 2010-09-02T00:00:00 committee_full: Transport and Tourism rapporteur: group: S&D name: SEHNALOVÁ Olga type: Committee report tabled for plenary, 1st reading/single reading
  • date: 2011-10-25T00:00:00 docs: url: http://www.europarl.europa.eu/oeil/popups/sda.do?id=19841&l=en type: Results of vote in Parliament title: Results of vote in Parliament url: http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P7-TA-2011-452 type: Decision by Parliament, 1st reading/single reading title: T7-0452/2011 body: EP type: Results of vote in Parliament
  • date: 2011-11-08T00:00:00 body: CSL type: Council Meeting council: Economic and Financial Affairs ECOFIN meeting_id: 3122
  • date: 2011-11-08T00:00:00 body: EP/CSL type: Act adopted by Council after Parliament's 1st reading
  • date: 2011-11-16T00:00:00 body: CSL type: Final act signed
  • date: 2011-11-16T00:00:00 body: EP type: End of procedure in Parliament
  • date: 2011-11-23T00:00:00 type: Final act published in Official Journal docs: url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32011L0088 title: Directive 2011/88 url: http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=OJ:L:2011:305:TOC title: OJ L 305 23.11.2011, p. 0001
commission
  • body: EC dg: Internal Market, Industry, Entrepreneurship and SMEs commissioner: TAJANI Antonio
committees/0
type
Responsible Committee
body
EP
associated
False
committee_full
Environment, Public Health and Food Safety
committee
ENVI
date
2010-09-09T00:00:00
rapporteur
name: PIETIKÄINEN Sirpa group: European People's Party (Christian Democrats) abbr: PPE
shadows
name: POC Pavel group: Progressive Alliance of Socialists and Democrats abbr: S&D
committees/0
body
EP
shadows
group: S&D name: POC Pavel
responsible
True
committee
ENVI
date
2010-09-09T00:00:00
committee_full
Environment, Public Health and Food Safety
rapporteur
group: PPE name: PIETIKÄINEN Sirpa
committees/1
type
Committee Opinion
body
EP
associated
False
committee_full
Industry, Research and Energy
committee
ITRE
opinion
False
committees/1
body
EP
responsible
False
committee_full
Industry, Research and Energy
committee
ITRE
committees/2
type
Committee Opinion
body
EP
associated
False
committee_full
Transport and Tourism
committee
TRAN
date
2010-09-02T00:00:00
rapporteur
name: SEHNALOVÁ Olga group: Progressive Alliance of Socialists and Democrats abbr: S&D
committees/2
body
EP
responsible
False
committee
TRAN
date
2010-09-02T00:00:00
committee_full
Transport and Tourism
rapporteur
group: S&D name: SEHNALOVÁ Olga
council
  • body: CSL type: Council Meeting council: Economic and Financial Affairs ECOFIN meeting_id: 3122 url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=SMPL&ROWSPP=25&RESULTSET=1&NRROWS=500&DOC_LANCD=EN&ORDERBY=DOC_DATE+DESC&CONTENTS=3122*&MEET_DATE=08/11/2011 date: 2011-11-08T00:00:00
docs
  • date: 2010-07-07T00:00:00 docs: url: https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=SECfinal&an_doc=2010&nu_doc=828 title: EUR-Lex title: SEC(2010)0828 type: Document attached to the procedure body: EC
  • date: 2010-07-07T00:00:00 docs: url: http://www.europarl.europa.eu/registre/docs_autres_institutions/commission_europeenne/sec/2010/0829/COM_SEC(2010)0829_EN.pdf title: SEC(2010)0829 url: https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=SECfinal&an_doc=2010&nu_doc=829 title: EUR-Lex type: Document attached to the procedure body: EC
  • date: 2010-09-16T00:00:00 docs: url: https://dm.eesc.europa.eu/EESCDocumentSearch/Pages/redresults.aspx?k=(documenttype:AC)(documentnumber:1158)(documentyear:2010)(documentlanguage:EN) title: CES1158/2010 type: Economic and Social Committee: opinion, report body: ESC
  • date: 2011-01-11T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE454.694 title: PE454.694 type: Committee draft report body: EP
  • date: 2011-01-26T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE450.581&secondRef=02 title: PE450.581 committee: TRAN type: Committee opinion body: EP
  • date: 2011-02-23T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE458.785 title: PE458.785 type: Amendments tabled in committee body: EP
  • date: 2011-03-29T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A7-2011-80&language=EN title: A7-0080/2011 type: Committee report tabled for plenary, 1st reading/single reading body: EP
  • date: 2011-11-16T00:00:00 docs: url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=ADV&RESULTSET=1&DOC_ID=[%n4]%2F11&DOC_LANCD=EN&ROWSPP=25&NRROWS=500&ORDERBY=DOC_DATE+DESC title: 00045/2011/LEX type: Draft final act body: CSL
  • date: 2011-11-30T00:00:00 docs: url: /oeil/spdoc.do?i=19841&j=0&l=en title: SP(2011)8697 type: Commission response to text adopted in plenary
  • date: 2010-10-01T00:00:00 docs: url: http://www.connefof.europarl.europa.eu/connefof/app/exp/COM(2010)0362 title: COM(2010)0362 type: Contribution body: IT_SENATE
  • date: 2010-10-05T00:00:00 docs: url: http://www.connefof.europarl.europa.eu/connefof/app/exp/COM(2010)0362 title: COM(2010)0362 type: Contribution body: PT_PARLIAMENT
events
  • date: 2010-07-07T00:00:00 type: Legislative proposal published body: EC docs: url: http://www.europarl.europa.eu/RegData/docs_autres_institutions/commission_europeenne/com/2010/0362/COM_COM(2010)0362_EN.doc title: COM(2010)0362 url: https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2010&nu_doc=362 title: EUR-Lex summary: PURPOSE: to amend Directive 97/68/EC and adapt the rules applicable to the flexibility scheme provided for in that directive in order to extend the application of that scheme to engines for use in propulsion of railcars and locomotives. PROPOSED ACT: Directive of the European Parliament and of the Council. BACKGROUND: it is recalled that Directive 97/68/EC regulates the maximum exhaust emissions carbon oxide (CO), hydrocarbons (HC), nitrogen oxides (NOx) and particulates (PM) from diesel engines installed in construction, agricultural and forestry machinery, railcars & locomotives, inland waterway vessels, constant speed engines and small petrol engines used in different types of machinery. The Directive provides for emissions limit stages of increasing stringency with corresponding compliance dates. Manufacturers must ensure that new engines comply with these limits in order that they can be placed on the market. Directive 2004/26/EC introduced the current applicable stage of emission limits for the majority of diesel engines referred to as Stage III A. These limits will be replaced by the more stringent Stage III B limits progressively as of 1st January 2011. The type approval period for these engines started on 1 January 2010. A great diversity of machinery production (approximately 1500 companies in the EU) is affected. To comply with Stage III B limits, current engines will need to be substantially modified. Changes to the configuration, size or weight of engines have a knock-on effect for Original Equipment Manufacturers (OEM) who will have to adapt the design of their machines in order to accommodate the modified engines. This process can only start once the engine is fully developed. Technical solutions for complying III B engines are not yet finalised. Thus, OEMs are not in a position to fully redesign the machinery where the engine is to be installed. In addition, compliance costs for manufacturers to cope with the new emission limits are significant. Directive 2004/26/EC also introduced the flexibility scheme to facilitate the transition between the different emission stages. The flexibility scheme allows the OEM to place on the market, during the period between two successive stages of exhaust emissions limit values, a limited number of non-road mobile machines which are fitted with engines that still comply with the exhaust emission limits of the previous stage. The flexibility scheme applies to compression ignition (diesel) engines used in construction, agricultural and forestry machinery, generator sets and pumps using constant speed engines, but not to locomotives, railcars and inland waterway vessels. IMPACT ASSESSMENT: a detailed Impact Assessment has been carried out on the basis of technical studies and a stakeholder consultation. It covers the different scenarios for engines covered by the existing flexibility scheme and identifies the need to include railcars. In addition to the conclusions of the Impact Assessment, locomotives have been added to the flexibility scheme. The Impact Assessment analyses different options ranging from the implementation of a scrapping scheme, variations of the flexibility scheme as regards the allowed percentage/number of engines to the set-up of a trading system whereby firms that would not use the entire flexibility could sell their flexibility rights to firms that need additional flexibility. The use of a scrapping scheme has been discarded as it is not suitable for assisting OEMs in financing R&D to make Stage III B machinery available. The set-up of a flexibility trading system was considered as a too complex system in a short time scale and thus disproportionate to the expected results. The option of increasing the existing flexibility scheme and extending it to sectors not yet included has been considered as the best option, balancing the environmental impact and an economic benefit in saved compliance costs for a limited period of time. LEGAL BASE: Article 114 of the Treaty on the Functioning of the EU. the proposal makes the following amendments to Directive 97/68/EC: CONTENT: it is proposed to modify the provisions of the flexibility scheme to mitigate further the economic costs of the transition of emission Stages III A to III B by extending its application for some type of non-road mobile machinery while maintaining the entry into force of the exhaust emission limit Stage III B to preserve the objective of the Directive of reducing emissions of gaseous and particulate pollutants in the Union. In addition, some engine manufacturers have progressed in developing compliant IIIB engines for locomotives while OEMs will yet not be entirely ready to place III B compliant locomotives on the market by 1st January 2012 as provided for in the Directive Therefore it appeared necessary to apply the flexibility scheme also to locomotives. The main amendments to the Directive are as follows: an increase of the percentage of the number of engines used for application in land based machines, placed on the market under the flexibility scheme in each engine category from 20% to 50% of the OEM’s annual sales of equipment and an adaptation of the maximum number of engines that may be placed on the market under the flexibility scheme as an optional alternative, in the period between emission Stage III A to emission Stage III B; inclusion of engines used for the propulsion of railcars and locomotives in the flexibility scheme providing the possibility for the OEM to place on the market a limited number of engines under the flexibility scheme; these measures will expire on 31 December 2013. FINANCIAL IMPLICATIONS: the proposal has no implication for the Union’s budget.
  • date: 2010-09-07T00:00:00 type: Committee referral announced in Parliament, 1st reading/single reading body: EP
  • date: 2011-03-16T00:00:00 type: Vote in committee, 1st reading/single reading body: EP summary: The Committee on the Environment, Public Health and Food Safety adopted the report drafted by Sirpa PIETIKÄINEN (EPP, FI) on the proposal for a directive of the European Parliament and of the Council amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme. It recommends that the European Parliament’s position adopted at first reading, under the ordinary legislative procedure, amends the Commission proposal as follows: Definitions : there is no precise definition of exhaust after-treatment systems for particle reduction which reflects the state of the art. There is no clear definition in EU law, causing interpretation difficulties for authorities and manufacturers. Percentage of engines : during Stage III B, the percentage of the number of engines used for application other than propulsion of railcars, locomotives and inland waterways vessels placed on the market under the flexibility scheme, should be increased from 20% to 30% of the equipment manufacturer's annual quantity of equipment placed on the market with engines in that category. Railcars : railcars should be left out the flexibility scheme, as legislated in directive 2004/26/EC. The report states that Stage III B - compliant railcars exist already, and the engine solutions are there. The railcars are mostly "borrowing" engines from heavy duty vehicles, for which IIIB solutions exist. Replacement engines : a replacement engine to be installed in a railcar or locomotive originally equipped with an engine that does not meet Stage III A limits or only meets Stage III A limits shall, as a minimum, comply with the limit values defined in Stage III A, where: the application of Stage III B requirements would give rise to significant technical difficulties in terms of gauge, axle load, body/chassis design or engine(s) control systems for multiple operation and, as a consequence, compromise the economic viability of the project; or no Stage III B engines that could be fitted into such a railcar or locomotive are available. By way of derogation, Member States may authorise the production and mounting of replacement engines that do not comply with Stage III A requirements. Any such derogation shall only be made under strict controls and limitations and with detailed justifications. Placing on the market : engines may be placed on the market under the flexibility scheme from the date when Stage IIIB becomes applicable until the end of that Stage, but not longer than three years from the beginning of that Stage. The revision of Directive 97/68/EC : in order to ensure the revised Directive is in line with the EU standards for good air quality, and in the light of experience, scientific findings and available technologies, the Commission should, in the upcoming revision of Directive 97/68/EC, subject to impact assessment: propose the establishment of a new emission stage - Stage V - that should be aligned with the requirements of Euro VI standards for heavy duty vehicles; introduce new requirements for the reduction of particulate matter, namely a particulate number (PN) limit that applies for all engine categories so as to ensure an effective reduction of ultra-fine particles; define a comprehensive approach to promote emission-reducing provisions and retrofitting of after-treatment systems on the existing NRMM fleet on the basis of discussions, on harmonised requirements for retrofit emission control devices, that are currently ongoing under the auspices of United Nations Economic Commission for Europe (UNECE); introduce a method providing for the periodic testing of mobile machinery and vehicles to establish whether their emissions performance complies with the values given at registration; look into the possibility of harmonising the specific emission standards for rail with the North American EPA standards so as to ensure the availability of affordable engines complying with the emission limit values set.
  • date: 2011-03-29T00:00:00 type: Committee report tabled for plenary, 1st reading/single reading body: EP docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A7-2011-80&language=EN title: A7-0080/2011
  • date: 2011-10-25T00:00:00 type: Results of vote in Parliament body: EP docs: url: https://oeil.secure.europarl.europa.eu/oeil/popups/sda.do?id=19841&l=en title: Results of vote in Parliament
  • date: 2011-10-25T00:00:00 type: Decision by Parliament, 1st reading/single reading body: EP docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P7-TA-2011-452 title: T7-0452/2011 summary: The European Parliament adopted by 572 votes to 68, with 14 abstentions, a legislative resolution on the proposal for a directive of the European Parliament and of the Council amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme. Parliament adopted its position at first reading, under the ordinary legislative procedure. The amendments adopted in plenary are the result of a compromise negotiated between the European Parliament and the Council. They amend the Commission proposal as follows: Percentage of engines : a recital states that during Stage III B, the maximum number of engines used for applications other than the propulsion of railcars, locomotives and inland waterways vessels that may be placed on the market under the flexibility scheme should be increased, in each engine category, from 20% to 37.5% of the annual quantity of equipment with engines in that category that is placed on the market by the equipment manufacturer. An optional alternative of placing a fixed number of engines on the market under the flexibility scheme should be available. That fixed number of engines should also be revised and should not exceed the ceilings laid down in section 1.2.2 of Annex XIII to Directive 97/68/EC. Railcars : the amended text stipulates that railcars should be left out the flexibility scheme, as legislated in directive 2004/26/EC. By way of derogation , Member States may authorise the placing on the market of the following engines for railcars and locomotives : (a) replacement engines that meet the Stage III A limits , where they are to replace engines for railcars and locomotives that: (i) do not meet the Stage III A standard; or (ii) meet the Stage III A standard but do not meet the Stage III B standard; (b) replacement engines that do not meet Stage III A limits , where they are to replace engines for railcars without driving control and not capable of independent movement, so long as such replacement engines meet a standard no lower than the standard met by engines fitted to existing railcars of the same type. Authorisations under this paragraph may be granted only in cases where the approval authority of the Member State is satisfied that the use of a replacement engine that meets the requirements of the latest applicable emissions stage in the railcar or locomotive in question will involve significant technical difficulties. A label bearing the text “REPLACEMENT ENGINE” and bearing the unique reference of the associated derogation shall be affixed to engines covered by this Directive. The Commission shall assess the environmental impacts of, and possible technical difficulties in respect of compliance. In the light of that assessment, the Commission shall, by 31 December 2016 , submit to the European Parliament and the Council a review accompanied, if appropriate, by a legislative proposal including an end date for the application of that provision. Limited period : the rules applicable to the flexibility scheme should be adapted to extend the application of that scheme to engines for use in the propulsion of locomotives for a strictly limited period of time Support programmes to enterprises : enterprises operating with machines that fall within the scope of this Directive should benefit from European financial support programmes or any relevant support programmes provided by Member States. Those support programmes should be aimed at favouring the early introduction of the highest emission standards. Revision of Directive 97/68/EC : in order to ensure that the revised Directive is in line with Union standards for good air quality, and in the light of experience, scientific findings and available technologies, the Commission should, in the upcoming revision of the Directive 97/68/EC and subject to impact assessment, consider: establishing a new emission stage - Stage V - that should be based, subject to technical feasibility, on the requirements of Euro VI standards for heavy-duty vehicles; introducing new requirements for the reduction of particulate matter, namely a particulate number limit that applies for all compression ignition engine categories, where technically feasible, so as to ensure an effective reduction of ultra-fine particles; taking a comprehensive approach to promoting emission-reducing provisions and retrofitting of after-treatment systems on the existing fleet of non-road mobile machinery on the basis of the currently ongoing discussions under the auspices of the United Nations Economic Commission for Europe regarding harmonised requirements for retrofit emission control devices; this approach should support Member States' efforts to improve air quality and to promote the protection of workers; establishing a method providing for the periodic testing of non-road mobile machinery and vehicles, in particular to establish whether their emissions performance complies with the values given at registration; the possibility of authorising, under certain conditions, replacement engines that do not comply with Stage III A requirements for railcars and locomotives; the possibility of harmonising the specific emission standards for rail with relevant standards at international level so as to ensure the availability of affordable engines that comply with the emission limits set. The text stipulates that the current global financial and economic crisis or any conjunctural economic fluctuations should not lead to a lowering of environmental standards. This revision of Directive 97/68/EC should therefore be considered to be exceptional.
  • date: 2011-11-08T00:00:00 type: Act adopted by Council after Parliament's 1st reading body: EP/CSL
  • date: 2011-11-16T00:00:00 type: Final act signed body: CSL
  • date: 2011-11-16T00:00:00 type: End of procedure in Parliament body: EP
  • date: 2011-11-23T00:00:00 type: Final act published in Official Journal summary: PURPOSE: to amend Directive 97/68/EU and adapt the rules applicable to the flexibility scheme provided for in that Directive in order to help engine manufacturers in view of the temporary difficulty faced by the manufacturing sector. LEGISLATIVE ACT: Directive 2011/88/EU of the European Parliament and of the Council amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme. CONTENT: following an agreement at first reading with the European Parliament, the Council adopted a directive amending Directive 97/68/EC as regards the provisions for engines placed on the market under the flexibility scheme in order to help engine manufacturers to adapt progressively to stricter environmental requirements and cope with the difficulties resulting from the financial crisis. The Danish delegation voted against. Directive 97/68/EC regulates the maximum exhaust emissions of carbon oxide (CO), hydrocarbons (HC) nitrogen oxides (HC), nitrogen oxides (NOx) and particulates (PM) from diesel engines installed in non-road mobile machinery and contributes to the protection of human health and the environment. Directive 97/68/EC also provided that emission limits applicable to type approval of the majority of diesel engines under Stage IIIA were to be replaced by the more stringent limits under Stage IIIB. Those limits apply form 1 January 2010 as regards the type approval for these engines and from 1 January 2011 with regard to their placing on the market. The flexibility scheme allows equipment manufacturers to purchase, during the emissions stage in force, a limited number of engines that do not comply with the emissions limits applicable during that stage, but which are approved in accordance with the requirements of that stage immediately preceding the applicable one. The new Directive amends the provisions of the flexibility scheme provided for in Directive 97/68/EC: · by increasing the percentage of engines which can be placed on the market while complying with the previous stage emission limits, from 20% to 37.5% of the manufacturer’s annual sales; · by extending such flexibility to engines used in locomotives; · by providing for a limited exemption for replacement engines in railcars and locomotives. Authorisations may be granted only in cases where the approval authority of the Member State is satisfied that the use of a replacement engine that meets the requirements of the latest applicable emissions stage in the railcar or locomotive in question will involve significant technical difficulties. A label bearing the text “REPLACEMENT ENGINE” and bearing the unique reference of the associated derogation shall be affixed to engines covered by this provision. The Commission shall assess the environmental impacts of, and possible technical difficulties in respect of compliance. In the light of that assessment, it shall, by 31 December 2016, submit a report accompanied, if appropriate, by a legislative proposal including an end date for the application of that provision. The revision of Directive 97/68/EC : in order to ensure that the revised Directive is in line with Union standards for good air quality, and in the light of experience, scientific findings and available tech­nologies, the Commission should, in the upcoming revision of Directive 97/68/EC and subject to impact assessment, consider: · establishing a new emission stage – Stage V – that should be based, subject to technical feasibility, on the requirements of Euro VI standards for heavy- duty vehicles ; · introducing new requirements for the reduction of particulate matter, namely a particulate number limit that applies for all compression ignition engine categories, where technically feasible, so ast o ensure an effective reduction of ultra-fine particles ; · taking a comprehensive approach to promoting emission-reducing provisions and retrofitting of after-treatment systems on the existing fleet of non- road mobile machinery ; · establishing a method providing for the periodic testing of non-road mobile machinery and vehicles, in particular to establish whether their emissions performance complies with the values given at registration; · the possibility of authorising, under certain conditions, replacement engines that do not comply with Stage III A requirements for railcars and locomotives ; · the possibility of harmonising the specific emission standards for rail with relevant standards at international level so as to ensure the availability of affordable engines that comply with the emission limits set. ENTRY INTO FORCE: 13/12/2011. TRANSPOSITION: 24/11/2012. docs: title: Directive 2011/88 url: https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32011L0088 title: OJ L 305 23.11.2011, p. 0001 url: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=OJ:L:2011:305:TOC
other
  • body: EC dg: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry commissioner: TAJANI Antonio
procedure/Modified legal basis
Old
Rules of Procedure of the European Parliament EP 150
New
Rules of Procedure EP 150
procedure/dossier_of_the_committee
Old
ENVI/7/03411
New
  • ENVI/7/03411
procedure/final/url
Old
http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32011L0088
New
https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32011L0088
procedure/instrument
Old
Directive
New
  • Directive
  • Amending Directive 97/68/EC 1995/0209(COD)
procedure/subject
Old
  • 3.40.03 Motor industry, cycle and motorcycle, commercial and agricultural vehicles
  • 3.70.02 Atmospheric pollution, motor vehicle pollution
New
3.40.03
Motor industry, cycle and motorcycle, commercial and agricultural vehicles
3.70.02
Atmospheric pollution, motor vehicle pollution
procedure/summary
  • Amending Directive 97/68/EC
activities/0/docs/0/celexid
CELEX:52010PC0362:EN
activities/0/docs/0/celexid
CELEX:52010PC0362:EN
links/European Commission/title
Old
PreLex
New
EUR-Lex
activities
  • date: 2010-07-07T00:00:00 docs: url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2010&nu_doc=362 title: COM(2010)0362 type: Legislative proposal published celexid: CELEX:52010PC0362:EN body: EC type: Legislative proposal published commission: DG: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry Commissioner: TAJANI Antonio
  • date: 2010-09-07T00:00:00 body: EP type: Committee referral announced in Parliament, 1st reading/single reading committees: body: EP shadows: group: S&D name: POC Pavel responsible: True committee: ENVI date: 2010-09-09T00:00:00 committee_full: Environment, Public Health and Food Safety rapporteur: group: PPE name: PIETIKÄINEN Sirpa body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE body: EP responsible: False committee: TRAN date: 2010-09-02T00:00:00 committee_full: Transport and Tourism rapporteur: group: S&D name: SEHNALOVÁ Olga
  • date: 2011-03-16T00:00:00 body: EP committees: body: EP shadows: group: S&D name: POC Pavel responsible: True committee: ENVI date: 2010-09-09T00:00:00 committee_full: Environment, Public Health and Food Safety rapporteur: group: PPE name: PIETIKÄINEN Sirpa body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE body: EP responsible: False committee: TRAN date: 2010-09-02T00:00:00 committee_full: Transport and Tourism rapporteur: group: S&D name: SEHNALOVÁ Olga type: Vote in committee, 1st reading/single reading
  • date: 2011-03-29T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A7-2011-80&language=EN type: Committee report tabled for plenary, 1st reading/single reading title: A7-0080/2011 body: EP committees: body: EP shadows: group: S&D name: POC Pavel responsible: True committee: ENVI date: 2010-09-09T00:00:00 committee_full: Environment, Public Health and Food Safety rapporteur: group: PPE name: PIETIKÄINEN Sirpa body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE body: EP responsible: False committee: TRAN date: 2010-09-02T00:00:00 committee_full: Transport and Tourism rapporteur: group: S&D name: SEHNALOVÁ Olga type: Committee report tabled for plenary, 1st reading/single reading
  • date: 2011-10-25T00:00:00 docs: url: http://www.europarl.europa.eu/oeil/popups/sda.do?id=19841&l=en type: Results of vote in Parliament title: Results of vote in Parliament url: http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P7-TA-2011-452 type: Decision by Parliament, 1st reading/single reading title: T7-0452/2011 body: EP type: Results of vote in Parliament
  • date: 2011-11-08T00:00:00 body: CSL type: Council Meeting council: Economic and Financial Affairs ECOFIN meeting_id: 3122
  • date: 2011-11-08T00:00:00 body: EP/CSL type: Act adopted by Council after Parliament's 1st reading
  • date: 2011-11-16T00:00:00 body: CSL type: Final act signed
  • date: 2011-11-16T00:00:00 body: EP type: End of procedure in Parliament
  • date: 2011-11-23T00:00:00 type: Final act published in Official Journal docs: url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32011L0088 title: Directive 2011/88 url: http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=OJ:L:2011:305:TOC title: OJ L 305 23.11.2011, p. 0001
committees
  • body: EP shadows: group: S&D name: POC Pavel responsible: True committee: ENVI date: 2010-09-09T00:00:00 committee_full: Environment, Public Health and Food Safety rapporteur: group: PPE name: PIETIKÄINEN Sirpa
  • body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE
  • body: EP responsible: False committee: TRAN date: 2010-09-02T00:00:00 committee_full: Transport and Tourism rapporteur: group: S&D name: SEHNALOVÁ Olga
links
National parliaments
European Commission
other
  • body: EC dg: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry commissioner: TAJANI Antonio
procedure
dossier_of_the_committee
ENVI/7/03411
reference
2010/0195(COD)
subtype
Legislation
legal_basis
Treaty on the Functioning of the EU TFEU 114-p1
stage_reached
Procedure completed
summary
Amending Directive 97/68/EC
instrument
Directive
Modified legal basis
Rules of Procedure of the European Parliament EP 150
title
Air quality: provisions for engines placed on the market under the flexibility scheme
type
COD - Ordinary legislative procedure (ex-codecision procedure)
final
subject