BETA

Activities of Gino TREMATERRA

Plenary speeches (5)

Mobilisation of the EU Solidarity Fund: flooding in Slovenia, Croatia and Austria in autumn 2012 (A7-0283/2013 - José Manuel Fernandes)
2016/11/22
Union Customs Code (A7-0006/2013 - Constance Le Grip)
2016/11/22
European transport-technology strategy for Europe's future sustainable mobility (A7-0241/2013 - Michael Cramer)
2016/11/22
Right of access to a lawyer in criminal proceedings and right to communicate upon arrest (A7-0228/2013 - Elena Oana Antonescu)
2016/11/22
Explanations of vote
2016/11/22
Dossiers: 2011/0190(COD)

Amendments (12)

Amendment 104 #

2013/0049(COD)

Proposal for a regulation
Recital 21
(21) The indication of origin supplements the basic traceability requirements concerning the name and address of the manufacturer. In particular, the indication of the country of origin helps to identify the actual place of manufacture in all those cases where the manufacturer cannot be contacted or its given address is different from the actual place of manufacture. Modern business processes as regards the purchasing and processing of materials are such that it is not sufficient to indicate the country of origin of the finished product in order to ensure that consumers are fully and accurately informed regarding its true provenance. Information regarding the country of origin of the constituent materials ensures that the right of consumers to make informed purchasing choices is respected. Such information can facilitate the task of market surveillance authorities in tracing the product back to the actual place of manufacture and enable contacts with the authorities of the countries of origin in the framework of bilateral or multilateral cooperation on consumer product safety for appropriate follow up actions.
2013/09/16
Committee: IMCO
Amendment 199 #

2013/0049(COD)

Proposal for a regulation
Article 7 – paragraph 3 a (new)
3a. Manufacturers shall be authorised to indicate the origin in English alone (‘Made in [country]’), since this is readily comprehensible for consumers.
2013/09/16
Committee: IMCO
Amendment 134 #

2012/0366(COD)

Proposal for a directive
Article 2 – paragraph 1 – point 19
(19) ‘maximum level’ or ‘maximum yield’ means the maximum content or emission, including 0, of a substance in a tobacco product measured in grams;
2013/05/08
Committee: IMCO
Amendment 216 #

2012/0366(COD)

Proposal for a directive
Article 8 – paragraph 3
3. For cigarette packets the general warning and the information message shall be printed on the lateral sides of the unit packets. These warnings shall have a width of not less than 20 mm and a height of not less than 43 mm. For roll-your-own tobacco the information message shall be printed on the surface that becomes visible when opening the unit packet. Both the general warning and the information message shall cover 50% of the surface on which they are printed.
2013/05/08
Committee: IMCO
Amendment 236 #

2012/0366(COD)

Proposal for a directive
Article 9 – paragraph 1 – point c
(c) cover 750 % of the external area of both the front and back surface of the unit packet and any outside packaging;
2013/05/08
Committee: IMCO
Amendment 245 #

2012/0366(COD)

Proposal for a directive
Article 9 – paragraph 1 – point e
(e) be positioned at the bottopm edge of the unit packet and any outside packaging, and in the same direction as any other information appearing on the packaging;
2013/05/08
Committee: IMCO
Amendment 253 #

2012/0366(COD)

Proposal for a directive
Article 9 – paragraph 1 – point g
(g) for unit packets of cigarettes, respect the following dimensions: (i) height: not less than 64 mm; (ii) width: not less than 55 mm.deleted
2013/05/08
Committee: IMCO
Amendment 267 #

2012/0366(COD)

Proposal for a directive
Article 9 – paragraph 3 – point c
(c) define the position, format, layout, and design, rotation and proportions of the health warnings;
2013/05/08
Committee: IMCO
Amendment 273 #

2012/0366(COD)

Proposal for a directive
Article 9 – paragraph 3 – point d
d) by way of derogation from Article 7(3), lay down the conditions under which health warnings may be broken during unit packet opening in a manner that ensures the graphical integrity and visibility of the text, photographs and cessation information.eleted
2013/05/13
Committee: IMCO
Amendment 310 #

2012/0366(COD)

Proposal for a directive
Article 13 – paragraph 1
1. A unit packet of cigarettes shall have a cuboid shape. A unit packet of roll-your- own tobacco shall have the form of a pouch, i.e. a rectangular pocket with a flap that covers the opening. The flap of the pouch shall cover at least 70% of the front of the packet. A unit packet of cigarettes shall include at least 20 cigarettes. A unit packet of roll-your-own tobacco shall contain tobacco weighing at least 40 g.deleted
2013/05/13
Committee: IMCO
Amendment 327 #

2012/0366(COD)

Proposal for a directive
Article 13 – paragraph 3
3. The Commission shall be empowered to adopt delegated acts in accordance with Article 22 to define more detailed rules for the shape and size of unit packets in so far as these rules are necessary to ensure the full visibility and integrity of the health warnings before the first opening, during the opening and after reclosing of the unit packet.
2013/05/13
Committee: IMCO
Amendment 333 #

2012/0366(COD)

Proposal for a directive
Article 13 – paragraph 4
4. The Commission shall be empowered to adopt delegated acts in accordance with Article 22 to make either cuboid or cylindric shape mandatory for unit packets of tobacco products other than cigarettes and roll-your-own tobacco if there is a substantial change of circumstances as established in a Commission report.
2013/05/13
Committee: IMCO