BETA

10 Amendments of Dita CHARANZOVÁ related to 2014/0136(COD)

Amendment 203 #
Proposal for a regulation
Recital 15
(15) The provisions of this Regulation do not affect the Member States’ entitlement to lay down rules concerning commissioning or periodic inspections of appliances burning gaseous fuels in order, or other measures such as installer training or certification, to ensure their correct installation, use and maintenance, including precautionary safety measures.
2015/03/04
Committee: IMCO
Amendment 205 #
Proposal for a regulation
Recital 17
(17) As this Regulation does not cover such risks caused by appliances burning gaseous fuels in case of incorrect installation, maintenance or use, Member States are strongly encouraged to take measures to ensure that public is made aware of the health and safety risks related to combustion products and in particular tothe need for proper precautionary safety measures, in particular in relation to emissions of carbon monoxide.
2015/03/04
Committee: IMCO
Amendment 210 #
Proposal for a regulation
Recital 47
(47) Fittings are not appliances burning gaseous fuels, but intermediate products made available between professionals and intendintended for appliance manufacturers and designed to be incorporated into an appliance. As the appropriatHowever, fittings should satisfy the design of a fitting contributes to the correct and safe functioningsential requirements so as to fulfil correctly their intended purpose when incorporated into an appliance ofr a finished appliance and as the gas related risks of an appliance can only be assessed aftssembled to constitute such an appliance. With a view to simplification and in order to avoid any confusion and misunderstanding for manufacturers incorporation of implementation of their obligations, it is considered justified theat fitting, it is appropriate thats should also bear the CE marking. Exceptions should be provided for in cases where the size or nature of the fittings does not bearallow the CE marking to be affixed to it.
2015/03/04
Committee: IMCO
Amendment 218 #
Proposal for a regulation
Article 9 – paragraph 2 – subparagraph 2 a (new)
Pursuant to Article 18, importers shall ensure the CE marking is affixed to any packaging and instructions accompanying the fitting where it is not possible or warranted for the fitting to bear the CE marking. Or. en (see amendments on Article 18)
2015/03/04
Committee: IMCO
Amendment 222 #
Proposal for a regulation
Article 10 – paragraph 2 – subparagraph 2 a (new)
Pursuant to Article 18, distributors shall verify that the CE marking is affixed to any packaging and instructions accompanying the fitting where it is not possible or warranted for the fitting to bear the CE marking. Or. en (see amendments on Article 18)
2015/03/04
Committee: IMCO
Amendment 223 #
Proposal for a regulation
Article 18 – paragraph 1
(1) The CE marking and the inscriptions referred to in Annex IV shall be affixed visibly, legibly and indelibly to the appliance or to its data plate. Where that is not possible or warranted on account of the nature of the appliance, the CE marking shall be affixed to the packaging and to the instructions accompanying the appliance.
2015/03/04
Committee: IMCO
Amendment 224 #
Proposal for a regulation
Article 18 – paragraph 2
(2) The inscriptions referred to point 2 of Annex IV shall be affixed, visibly, legibly and indelibly to the fitting or to its data plate, as far as relevant. Where that is not possible or warranted on account of the nature of the fitting, the CE marking shall be affixed to the packaging and to the instructions accompanying the fitting.
2015/03/04
Committee: IMCO
Amendment 225 #
Proposal for a regulation
Article 18 – paragraph 3
(3) The CE marking and/or the inscriptions referred to in Annex IV shall be affixed before the appliance or the fitting is placed on the market. Where that is not possible or warranted on account of the nature of the appliance or fitting, the CE marking shall be affixed to the packaging and to the instructions accompanying the appliance or fitting.
2015/03/04
Committee: IMCO
Amendment 227 #
Proposal for a regulation
Annex I – part 1 – point 1.6.2 – paragraph 2
The manufacturer of the appliance shall include in the instructions accompanying the appliance, all necessary information for adjustment, operation and maintenance of the fittings as part of the finished appliance, as appropriate. Such instructions may note where maintenance by a professional would be advisable.
2015/03/04
Committee: IMCO
Amendment 228 #
Proposal for a regulation
Annex I – part 3 – point 3.4 – point 3.4.4
3.4.4. Appliances shall be so designed and constructed that, when used normally, they do not cause a concentration of any substances harmful to health, such as they would be likely to present a danger to the health of persons and domestic animals exposed.
2015/03/04
Committee: IMCO