BETA

17 Amendments of Bolesław G. PIECHA related to 2018/0172(COD)

Amendment 121 #
Proposal for a directive
Recital 11
(11) For certain single-use plastic products, suitable and more sustainable alternatives are not yet readily available and the consumption of most such single- use plastic products is expected to increase. To reverse that trend and promote efforts towards more sustainable solutions Member States should be required to take the necessary measures to achieve a significant reduction in the consumption of those products, without compromising food hygiene or food safety, good hygiene practices, good manufacturing practices, consumer information, or traceability requirements set out in Union food legislation44 . __________________ 44Regulation (EC) 178/2002 laying down the general principles and requirements of food law (OJ L 31, 1.2.2002, p.1-24), Regulation (EC) No 852/2004 on the hygiene of foodstuffs (OJ L 139, 30.4.2004, p.1-54), Regulation (EC) No 1935/2004 on materials intended to come into contact and other relevant legislation related to food safety, hygiene and labelling (OJ L 338, 13.11.2004, p.4-17).deleted
2018/09/05
Committee: ENVI
Amendment 148 #
Proposal for a directive
Recital 13
(13) Caps and lids, with a significant part made of plastic,Plastic caps and lids from beverage containers are among the most found single-use plastic items littered on Union beaches. Therefore, beverage containers that are single-use plastic products should only be allowed to be placed on the market if they fulfil specific product design requirements significantly reducing the leakage into the environment of beverage container caps and lids. For beverage containers that are single-use plastic products and packaging, this requirement is an addition to the essential requirements on the composition and the reusable and recoverable, including recyclable, nature of packaging set out in Annex II of Directive 94/62/EEC. In order to facilitate conformity with the product design requirement and ensure a smooth functioning of the internal market, it is necessary to develop a harmonised standard adopted in accordance with Regulation (EU) No 1025/2012 of the European Parliament and of the Council45 and the compliance with that standard should allow presumption of conformity with those requirements. Sufficient time should be envisaged for the development of a harmonised standard and to allow the producers to adapt their production chains in relation to the implementation of the product design requirement. __________________ 45 Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (OJ L 316, 14.11.2012, p.12).
2018/09/05
Committee: ENVI
Amendment 161 #
Proposal for a directive
Recital 15
(15) With regard to single-use plastic products for which there are no readily available suitable and more sustainable alternatives, Member States should, in line with the polluter pays principle, also introduce extended producer responsibility schemes to cover the costs of waste management and clean-up of litter as well as the costs of awareness- raising measures to prevent and reduce such litter.deleted
2018/09/05
Committee: ENVI
Amendment 188 #
Proposal for a directive
Recital 18
(18) In order to prevent littering and other inappropriate forms of disposal resulting in marine litter containing plastic, consumers need to be properly informed about the most appropriate waste disposal options available and/or waste disposal options to be avoided, best practices with regard to waste disposal and the environmental impact of bad disposal practices as well as about the plastic content in certain single-use plastic products and fishing gear. Therefore, Member States should be required to take awareness raising measures ensuring that such information is given to the consumers. The information should not contain any promotional content encouraging the use of the single-use plastic products. Member States should be able to choose the measures which are most appropriate based on the nature of the product or its use. Producers of single-use plastic products and fishing gear containing plastic should cover the costs of the awareness raising measures as part of their extended producer responsibility obligation.
2018/09/05
Committee: ENVI
Amendment 190 #
Proposal for a directive
Recital 19
(19) Directive 2008/98/EC lays down general minimum requirements for extended producer responsibility schemes. Those requirements should apply to extended producer responsibility schemes established by this Directive. This Directive, however, establishes additional extended producer responsibility requirements, for example, the requirement on producers of certain single-use plastic products to cover the costs of clean-up of litter.
2018/09/05
Committee: ENVI
Amendment 196 #
Proposal for a directive
Recital 20
(20) Beverage bottles that are single- use plastic products are one of the most found marine litter items on the beaches in the Union. This is due to ineffective separate collection systems and low participation in those systems by the consumers. It is necessary to promote more efficient separate collection systems and therefore, a minimum separate collection target should be established for beverage bottles that are single-use plastic products. Member States should be able to achieve that minimum target by setting separate collection targets for beverage bottles that are single-use plastic products in the framework of the extended producer responsibility schemes or by establishing deposit refund schemes or by any other measure that they find appropriate. This will have a direct, positive impact on the collection rate, the quality of the collected material and the quality of the recyclates, offering opportunities for the recycling business and the market for the recyclate.deleted
2018/09/05
Committee: ENVI
Amendment 214 #
Proposal for a directive
Recital 24
(24) In order to ensure uniform conditions for the implementation of this Directive, implementing powers should be conferred on the Commission in respect of the methodology for the calculation of the annual consumption of the single-use plastic products for which consumption reduction objectives have been set, the specifications for the marking to be affixed on certain single-use plastic products and the format of the information to be provided by Member States and compiled by the European Environment Agency on the implementation of this Directive. Those powers should be exercised in accordance with Regulation (EU) No 182/2011 of the European Parliament and of the Council49 . __________________ 49 Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission’s exercise of implementing powers (OJ L 55, 28.2.2011, p. 13).
2018/09/05
Committee: ENVI
Amendment 229 #
Proposal for a directive
Article 1 – paragraph 1
The objective of this Directive is to prevent and reduce the impact of certain plastic products on the environment, in particular the aquaticmarine environment, and on human health as well as to promote the transition to a circular economy with innovative business models, products and materials, thus also contributing to the efficient functioning of the internal market.
2018/09/05
Committee: ENVI
Amendment 280 #
Proposal for a directive
Article 4
1. Member States shall take the necessary measures to achieve a significant reduction in the consumption of the single-use plastic products listed in Part A of the Annex on their territory by … [six years after the end-date for transposition of this Directive]. Those measures may include national consumption reduction targets, measures ensuring that reusable alternatives to those products are made available at the point of sale to the final consumer, economic instruments such as ensuring that single-use plastic products are not provided free of charge at the point of sale to the final consumer. Those measures may vary depending on the environmental impact of the products referred to in the first subparagraph. 2. implementing act laying down the methodology for the calculation and verification of the significant reduction in the consumption of the single-use plastic products referred to in paragraph 1. That implementing act shall be adopted in accordance with the examination procedure referred to in Article 16(2).4 Article 4 deleted Consumption reduction The Commission may adopt an
2018/09/05
Committee: ENVI
Amendment 338 #
Proposal for a directive
Article 6 – paragraph 1
1. From the date of publication of the harmonised standards referred to in paragraph 3 in the Official Journal of the European Union, Member States shall ensure that single-use plastic products listed in Part C of the Annex that have plastic caps and lids with a significant part made of plastic may be placed on the market only if the caps and lids remain attached to the container during the product’s intended use stage.
2018/09/05
Committee: ENVI
Amendment 350 #
Proposal for a directive
Article 6 – paragraph 4
4. From the date of publication of the harmonised standards referred to in paragraph 3 in the Official Journal of the European Union, beverage containers referred tosingle-use plastics products listed in pParagraph 1t C of the Annex which are in conformity with those standards or parts thereof shall be presumed to be in conformity with the requirement covered by those standards or parts thereof laid down in paragraph 1.
2018/09/05
Committee: ENVI
Amendment 361 #
Proposal for a directive
Article 7 – paragraph 1 – introductory part
1. Member States shall ensure that each single-use plastic product or packaging of the products listed in Part D of the Annex placed on the market bears a conspicuous, clearly legible and indelible marking informing consumers of one or more of the following:
2018/09/05
Committee: ENVI
Amendment 397 #
Proposal for a directive
Article 8 – paragraph 1
1. Member States shall ensure that extended producer responsibility schemes are established for all single-use plastic products listed in Part E of the Annex placed on the Union market, in accordance with the provisions on extended producer responsibility in Directive 2008/98/EC.deleted
2018/09/05
Committee: ENVI
Amendment 402 #
Proposal for a directive
Article 8 – paragraph 2
2. With regard to the schemes established pursuant to paragraph 1, Member States shall ensure that the producers of the single-use plastic products listed in Part E of the Annex shall cover the costs of the collection of waste consisting of those single-use plastic products and its subsequent transport and treatment, including the costs to clean up litter and the costs of the awareness raising measures referred to in Article 10 regarding those products. For single-use plastic products that are packaging, the requirements laid down in this paragraph supplement the requirements regarding extended producer responsibility schemes laid down in Directive 94/62/EEC and Directive 2008/98/EC.deleted
2018/09/05
Committee: ENVI
Amendment 440 #
Proposal for a directive
Article 9 – paragraph 1 – introductory part
Member States shall take the necessary measures to collect separately, by 2025, an amount of waste single-use plastic products listed in Part F of the Annex equal to 970% of such single-use plastic products placed on the market in a given year by weight. In order to achieve that objective Member States may inter alia:
2018/09/05
Committee: ENVI
Amendment 528 #
Proposal for a directive
Annex I – part A
A Single-use plastic products covered by Article 4 on consumption reduction — such as boxes, with or without a cover, used to contain food that is intended for immediate consumption from the receptacle either on-the-spot or take-away without any further preparation, such as food containers used for fast food, except beverage containers, plates and packets and wrappers containing food —deleted Food containers, i.e. receptacles Cups for beverages
2018/09/05
Committee: ENVI
Amendment 646 #
Proposal for a directive
Annex I – part E
E Single use plastic products covered by Article 8 on extended producer responsibility — such as boxes, with or without a cover, used to contain food that is intended for immediate consumption from the receptacle either on-the-spot or take-away without any further preparation, such as food containers used for fast food, except beverage containers, plates and packets and wrappers containing food — flexible material containing food that is intended for immediate consumption from the packet or wrapper without any further preparation — receptacles used to contain liquid such as beverage bottles including their caps and lids — — filters marketed for use in combination with tobacco products — care, domestic and industrial wipes — industrial or other professional uses and applications, that are not distributed to consumers — defined in Article 3(1c) of Directive 94/62/ECdeleted Food containers, i.e. receptacles Packets and wrappers made from Beverage containers, i.e. Cups for beverages Tobacco products with filters and Wet wipes, i.e. pre-wetted personal Balloons, except balloons for Lightweight plastic carrier bags as
2018/09/05
Committee: ENVI