7 Amendments of Krzysztof HETMAN related to 2021/0105(COD)
Amendment 21 #
Proposal for a regulation
Recital 29
Recital 29
(29) The manufacturer or the manufacturer’s authorised representative should also ensure that a risk assessment is carried out for the machinery product, which the manufacturer wishes to place on the market. For this purpose, the manufacturer should determine which of the essential health and safety requirements that are applicable to the machinery product and in respect of which measures must be taken to address the risks that the machinery product may present. Where the machinery product integrates an artificial intelligence system, the risks identified during the risk assessment should include those only foreseeable risks that may appear during the machinery product’s lifecycle due to an intended evolution of its behaviour to operate with varying levels of autonomy. In this respect, where the machinery product integrates an artificial intelligence system, the risk assessment for the machinery product should consider the risk assessment for that artificial intelligence system that has been carried out pursuant to Regulation (EU) .../... of the European Parliament and of the Council23 . _________________ 23 +OJ: Please insert in the text the number of the Regulation contained in document ….
Amendment 40 #
Proposal for a regulation
Article 2 – paragraph 2 – point g
Article 2 – paragraph 2 – point g
(g) agricultural and forestry vehicles, as well as systems, components, separate technical units, parts and equipment designed and constructed for such vehicles, that fall within the scope of application of Regulation (EU) No 167/2013; , with the exclusion of machinery mounted on those vehicles”;
Amendment 88 #
Proposal for a regulation
Annex III – Part 1 – point 1.1 – point 1.1.9 – paragraph 2
Annex III – Part 1 – point 1.1 – point 1.1.9 – paragraph 2
A hardware component relevant for connection or access to software that is critical for the compliance of the machinery product with the relevant health and safety requirements shall be designed so that it is adequately protected against accidental or intentional corruption. The machinery product shall collect evidence of a legitimate or illegitimate intervention in the aforementioned hardware component (relevant for connection or access to software that is critical for the compliance of the machinery product).
Amendment 91 #
Proposal for a regulation
Annex III – Part 1 – point 1.2 – point 1.2.1 – paragraph 2 – point a
Annex III – Part 1 – point 1.2 – point 1.2.1 – paragraph 2 – point a
(a) they can reasonably withstand, where appropriate to the circumstances and the risks, the intended operating stresses and intended and unintended external influences, including malicious attempts from third parties to create a hazardous situation;
Amendment 130 #
Proposal for a regulation
Annex III – Part 3 – point 3.3 – point 3.3.3 – paragraph 6 – introductory part
Annex III – Part 3 – point 3.3 – point 3.3.3 – paragraph 6 – introductory part
Autonomous mobile machinery products shall comply with anyt least one of the two following conditions:
Amendment 131 #
Proposal for a regulation
Annex III – Part 3 – point 3.3 – point 3.3.3 – paragraph 6 – point b
Annex III – Part 3 – point 3.3 – point 3.3.3 – paragraph 6 – point b
(b) it shall be equipped with devices intended to detect any human, domestic animal or any other obstacle in its vicinity, where those obstacles could give rise to a risk to health and safety of persons or where appropriate of domestic animals or to safe operation of the machinery product.
Amendment 149 #
Proposal for a regulation
Article 2 – paragraph 2 – point g
Article 2 – paragraph 2 – point g
(g) agricultural and forestry vehicletractors, as well as systems, components, separate technical units, parts and equipment designed and constructed for such vehicles, that fall within the scope of application of Regulation (EU) No 167/2013, with the exclusion of machinery mounted on those vehicles;