Activities of Tomas TOBÉ related to 2022/0104(COD)
Opinions (1)
OPINION on the proposal for a directive of the European Parliament and of the Council amending Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) and Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste
Amendments (7)
Amendment 60 #
Proposal for a directive
Article 1 – paragraph 1 – point 3 – point c a (new)
Article 1 – paragraph 1 – point 3 – point c a (new)
Directive 2010/75/EU
Article 3 – paragraph 1 – point (14 a) (new)
Article 3 – paragraph 1 – point (14 a) (new)
(ca) 'Innovative techniques' are techniques relevant to activities within the scope of that Directive, their level of development from research to deployment (technology readiness level or ‘TRL’) and their environmental performance. Innovative techniques should be at least at the level of technology demonstrated in relevant environment (industrially relevant environment in the case of key enabling technologies) or system prototype demonstration in operation environment (TRL 6-7).
Amendment 152 #
Proposal for a directive
Article 1 – paragraph 1 – point 12
Article 1 – paragraph 1 – point 12
Directive 2010/75/EU
Article 15 – paragraph 3 – introductory part
Article 15 – paragraph 3 – introductory part
The competent authority shall set the strictest possible emission limit values that are consistent with the lowest emissions achievable by applying BAT in the installation, and that ensure that, under normal operating conditions, emissions do not exceed the emission levels associated with the best available techniques (BAT- AELs) as laid down in the decisions on BAT conclusions referred to in Article 13(5). The emission limit values shall be based on an assessment by the operator analysing the feasibility of meeting the strictest end of the BAT-AEL range and demonstrating the best performance the installation can achieve by applying BAT as described in BAT conclusions, while taking into account fluctuations of the performance of the best available techniques and the circumstances where the installation operates at the highest end of the emission values range. . The emission limit values shall be set through either of the following:
Amendment 167 #
Proposal for a directive
Article 1 – paragraph 1 – point 12
Article 1 – paragraph 1 – point 12
Directive 2010/75/EU
Article 15 – paragraph 3 a
Article 15 – paragraph 3 a
3a. The competent authority shall set environmental performance limit valuelevels that ensure that, under normal operating conditions, such performance limits values do not exceed the environmental performance levels associated with BATs as laid down in the decisions on BAT conclusions referred to in Article 13(5).
Amendment 188 #
Proposal for a directive
Article 1 – paragraph 1 – point 15 a (new)
Article 1 – paragraph 1 – point 15 a (new)
Directive 2010/75/EU
Article 21 – paragraph 3 a (new)
Article 21 – paragraph 3 a (new)
(15a) 3a. In case undertakings are implementing deep industrial transformations towards EU objectives of a circular and climate neutral economy, the competent authority shall exempt the operator from the reconsideration and updating of permit conditions for the activities concerned until the transformation is completed.
Amendment 209 #
Proposal for a directive
Article 1 – paragraph 1 – point 22
Article 1 – paragraph 1 – point 22
Directive 2010/75/EU
Article 27 c (new)
Article 27 c (new)
By way of derogation from Article 15(3) and (3a) and 21(3), the competent authority may when an operator chooses that option, set emission limit values that ensure that, within 6 years of publication of a decision on BAT conclusions in accordance with Article 13(5) relating to the main activity of an installation, emissions shall not, under normal operating conditions, exceed emission levels associated with emerging techniques as laid down in the decisions on BAT conclusions. Where the time period referred in the first paragraph has elapsed and where the operator cannot comply with the emission limit values set by way of derogation from Article 15(3), the competent authority shall ensure that within a maximum period of 4 years following the expiry of the time period referred to in the first paragraph:(a) the permit conditions for the installation concerned are reconsidered and, if necessary, updated to ensure compliance with this Directive, in particular, with Article15(3) and (4), where applicable;(b) the installation complies with those permit conditions. For the time period in between the expiry of the time period referred to in the first paragraph and the reconsideration and updating of the permit conditions, the competent authority shall apply the derogation principles referred to in Article 15(4).
Amendment 212 #
Proposal for a directive
Article 1 – paragraph 1 – point 22
Article 1 – paragraph 1 – point 22
Directive 2010/75/EU
Article 27 d (new)
Article 27 d (new)
Amendment 269 #
Proposal for a directive
Article 1 – paragraph 1 – point 32
Article 1 – paragraph 1 – point 32
Directive 2010/75/EU
Article 79 a (new) – paragraph 4
Article 79 a (new) – paragraph 4