BETA

21 Amendments of Alex AGIUS SALIBA related to 2020/2028(INI)

Amendment 5 #
Motion for a resolution
Recital B
B. whereas the purpose of the Construction Products Regulation (CPR) is to remove technical barriers to trade in construction products in order to enhance their free movement in the internal market; while ensuring that products meet safety standards, no matter where they are manufactured in the EU;
2020/10/12
Committee: IMCO
Amendment 7 #
Motion for a resolution
Recital B a (new)
Ba. whereas safe products are one key to reducing the accident rates, which are particularly high in the construction sector;
2020/10/12
Committee: IMCO
Amendment 8 #
Motion for a resolution
Recital C
C. whereas the slow adoption and non- citation of harmonised standards is problematic, as the adoption process is not keeping pace with developments in the sector, creating uncertainty for businesses; whereas, it is necessary to establish clear and comprehensive requirements at European level as regards the quality of construction products;
2020/10/12
Committee: IMCO
Amendment 17 #
Motion for a resolution
Paragraph 2
2. Points to the specific nature of the CPR, which differs from the general principles of the new legislative framework (NLF), chiefly because it does not harmonise any specific requirements or minimum safety levels for construction products, thus unbalancing and fragmenting the internal market, but instead defines a common technical language for measuring the performance of construction products over their essential characteristics;
2020/10/12
Committee: IMCO
Amendment 19 #
Motion for a resolution
Paragraph 2 a (new)
2a. Considers that the common technical language must be the same for all construction products;
2020/10/12
Committee: IMCO
Amendment 27 #
Motion for a resolution
Paragraph 5 a (new)
5a. Considers that construction products and the purpose of the common technical specifications must be explicitly described;
2020/10/12
Committee: IMCO
Amendment 37 #
Motion for a resolution
Paragraph 8
8. Points to the fact that standardisation issues need to be addressed in all steps of the preparation process; calls for transparency, clarity and openness from all parties involved; highlights the need to ensure the high quality of the mandates issued by the Commission and the necessity to provide clear guidelines for the standardisation bodies; suggests establishing clearly defined timeframes for the Commission toand increase human resources in the relevant units to efficiently assess the prepared standards and clear deadlines for all parties to ensure further revision if a mandate or the CPR is found not to have been adhered to; considers it important to define the scope of the standards more precisely so that manufacturers can have clear guidance when declaring that their products fall within the scope;
2020/10/12
Committee: IMCO
Amendment 47 #
Motion for a resolution
Paragraph 12 a (new)
12a. Highlights that Product Contact Points for Construction are implemented in all Member States and have a preponderant role to play in informing economic operators about the application of the Regulation; regrets that in 2018, only 57% of stakeholders were aware of their existence; suggests therefore to increase awareness of the existence of such contact points in each Member States;
2020/10/12
Committee: IMCO
Amendment 49 #
Motion for a resolution
Paragraph 12 b (new)
12a. Highlights that the European Technical Assessment (ETA) can be helpful as alternative process to the standardisation system and should be maintained in way that encourages the development of innovative products and the participation of SMEs;
2020/10/12
Committee: IMCO
Amendment 50 #
Motion for a resolution
Paragraph 12 c (new)
12c. Underlines that a common technical language is key to promote a circular economy as it allows manufacturers to display their products’ performance in a common manner; further, considers that a greater focus should be put on standards that can help promoting a circular economy in Europe;
2020/10/12
Committee: IMCO
Amendment 65 #
Motion for a resolution
Paragraph 16 a (new)
16a. Highlights that national marks, in particular mandatory marks, continue to apply in national Member States creating additional requirements to products already covered by harmonised standards and potentially creating unjustified barriers to the free movement of goods in the Single Market; suggests that the Commission could assess whether additional action are needed in order to ensure a well functioning of the Single Market;
2020/10/12
Committee: IMCO
Amendment 68 #
Motion for a resolution
Paragraph 17
17. Is concerned by the fact that market surveillance for construction products is seen as insufficient and ineffective by the industry; emphasises that such a situation undermines the level playing field for economic operators who comply with the legislation, to the benefit of rogue traders, who do not; points out that weak and inconsistent market surveillance could lead to an increase of products that do not meet their declared performance, putting end- users at riskboth businesses, especially SMEs, and end- users at risk; outlines that market surveillance need to be enhanced and a more consistent approach needs to be applied across all Member States;
2020/10/12
Committee: IMCO
Amendment 71 #
Motion for a resolution
Paragraph 18
18. Calls on the Member States to fully implement Regulation (EU) 2019/1020, which aims to strengthen the market surveillance of products covered by Union harmonisation legislation, including the CPR and to provide the necessary financial, human and technical resources to allow market surveillance authorities to perform their duties efficiently;
2020/10/12
Committee: IMCO
Amendment 78 #
Motion for a resolution
Paragraph 20
20. Considers it necessary for national market surveillance authorities responsible for construction products to cooperate closely with national building control authorities and with producers to ensure a nuanced approach in assessing the conformity of construction products used in construction works with the declared performance or intended use, as well as ensure their compliance with building regulations, thereby guaranteeing the safety and security of end-users, as well as fair competition in the internal market;
2020/10/12
Committee: IMCO
Amendment 83 #
Motion for a resolution
Paragraph 21
21. Points to the increase in online sales in the construction sector; highlights the need to ensure the effective market surveillance of construction products sold online, especially those purchased from non-EU economic operators, that might not comply with the EU legislation and therefore could influence the quality and safety of constructions;
2020/10/12
Committee: IMCO
Amendment 91 #
Motion for a resolution
Paragraph 22 a (new)
22a. Calls on the Commission to assess how the CPR could support the placing on the market of certain used or used and remanufactured construction products in order to promote circularity of construction products;
2020/10/12
Committee: IMCO
Amendment 98 #
Motion for a resolution
Paragraph 24
24. Calls on the Commission to explore the relevance of incorporating certain requirements such as sustainability criteriaenvironmental into the harmonised standards under the CPR, so as to provide manufacturers with one single framework for the testing of products; stresses the importance of a proper assessment of the product categories to which such requirements would be relevant; highlights that such incorporation should not lead to an increase in the prices of construction products;
2020/10/12
Committee: IMCO
Amendment 100 #
Motion for a resolution
Paragraph 24 a (new)
24a. Considers that environmental requirements must take into account products’ characteristics and clear environmental priorities; asks the Commission to consult all relevant stakeholders when determining such requirements in order to align them with sectors’ needs and EU’s environmental goals;
2020/10/12
Committee: IMCO
Amendment 103 #
Motion for a resolution
Paragraph 25 a (new)
25a. Regrets that the objective of creating a level playing field by allowing simplified procedures for SMEs has not proven effective due to lack of awareness and legal uncertainties; suggests the Commission to further clarify the simplified procedure in order to be full used by SMEs;
2020/10/12
Committee: IMCO
Amendment 104 #
Motion for a resolution
Paragraph 26
26. Calls on the Commission to clarify the relationship of the CPR to related internal market legislation, such as the Ecodesign Directive16 , the Energy Labelling Regulation17 , the Waste Framework Directive18 and the Drinking Water Directive19 , and, where necessary, to streamline the relevant provisions in order to close regulatory loopholes and ensure legal clarity for businesses, while taking into account new business models; __________________ 16 OJ L 285, 31.10.2009, p. 10. 17 OJ L 198, 28.7.2017, p. 1. 18 OJ L 312, 22.11.2008, p. 3. 19 OJ L 330, 5.12.1998, p. 32.
2020/10/12
Committee: IMCO
Amendment 107 #
Motion for a resolution
Paragraph 28
28. Stresses the need to ensure legal clarity for a transitional period as regards any revision of the CPR and the review of the CPR acquis, in order to avoid a legal vacuum; considers that it is necessary to clarify the purpose and limits of the CPR in relation to other European legislative acts in order to avoid possible overlap of legislation;
2020/10/12
Committee: IMCO