BETA

39 Amendments of Alexander BERNHUBER related to 2022/0396(COD)

Amendment 314 #
Proposal for a regulation
Recital 23
(23) In order to stimulate innovation in packaging, it is appropriate to allow that packaging, which presents innovative features resulting in significant improvement in the core function of packaging and has demonstrable environmental benefits, is given limited additional time of five years to comply withexempt from the recyclability requirements. The innovative features should be explained in the technical documentation accompanying the packaging.
2023/05/12
Committee: ENVI
Amendment 317 #
Proposal for a regulation
Recital 24
(24) In order to protect human and animal health and safety, due to the nature of the packaged products and the related requirements, it is appropriate that the recyclability requirements should not apply to immediate packaging as defined in Article 1 of Directive 2001/83/EC of the European Parliament and of the Council50and in Article 4(25) of Regulation (EU) 2019/6 of the European Parliament and of the Council51, which are in direct contact with the medicinal product, as well as contact sensitive plastic packaging of medical devices covered by Regulation (EU) 2017/745 of the European Parliament and of the Council52andof in vitro diagnostics medical devices covered by Regulation (EU) 2017/746 of the European Parliament and of the Council53.These exemptions should apply until 1 January 2035.and contact sensitive packaging for foods covered by Regulation (EC) No 1935/2004 and Regulation (EU) No 609/2013 _________________ 50 Directive 2001/83/EC of the European Parliament and of the Council of 6 November 2001 on the Community code relating to medicinal products for human use (OJ L 311, 28.11.2001, p. 67). 51 Regulation (EU) 2019/6 of the European Parliament and of the Council of 11 December 2018 on veterinary medicinal products and repealing Directive 2001/82/EC (OJ L 4, 7.1.2019, p. 43). 52 Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices, amending Directive 2001/83/EC, Regulation (EC) No 178/2002 and Regulation (EC) No 1223/2009 and repealing Council Directives 90/385/EEC and 93/42/EEC (OJ L 117, 5.5.2017, p. 1). 53 Regulation (EU) 2017/746 of the European Parliament and of the Council of 5 April 2017 on in vitro diagnostic medical devices and repealing Directive 98/79/EC and Commission Decision 2010/227/EU (OJ L 117, 5.5.2017, p. 176).
2023/05/12
Committee: ENVI
Amendment 333 #
Proposal for a regulation
Recital 28
(28) In order to ensure a high level of human and animal health protection in accordance with requirements in Union legislation and to avoid any risk to the security of supply and to the safety of medicines and medical devices safety, it is appropriate to provide for the exclusion from the obligation of a minimum recycled content in plastic packaging for immediate packaging as defined in Article 1, point 23, of Directive 2001/83/EC and in Article 4, point 25, of Regulation (EU) 2019/6, as well as for contact sensitive plastic packaging of medical devices covered by Regulation (EU) 2017/745 and for contact sensitive packaging of in vitro diagnostics medical devices covered by Regulation (EU) 2017/746 and of contact sensitive packaging for foods covered by Regulation (EC) No 1935/2004 and Regulation (EU) No 609/2013. This exclusion should also apply to outer packaging of human and veterinary medicinal products as defined in Article 1, point 24, of Directive 2001/83/EC and in Article 4, point 26, of Regulation (EU) 2019/6 in cases where it has to comply with specific requirements to preserve the quality of the medicinal product.
2023/05/12
Committee: ENVI
Amendment 335 #
Proposal for a regulation
Recital 29
(29) In order to prevent barriers to the internal market and ensure the efficient implementation of the obligations, economic operators should ensure that the plastic part of each unit of packaging contains a certain minimum percentage of recycled content recovered from post- consumer plastic waste calculated as an average of the plastic packaging placed by a producer on the Union market. This provision should not apply to food or feed contact plastic packaging in those cases when the recycled content risks affecting human and animal health and/or compromising the organoleptic characteristics of products.
2023/05/12
Committee: ENVI
Amendment 478 #
(70) Achieving re-use and refill targets can be challenging for smaller economic operators. Therefore, certain economic operators should be exempted from the obligation to meet the packaging re-use targets if they place less than a certain volume of packaging on the market, or fulfil the definition of micro-company under Commission Recommendation 2003/36160, or have the sales area, including all storage and dispatch areas, under a certain surface limit, or in case of farms and agricultural businesses that carry out direct sales activities in farmers' markets regulated by national or regional law. The power to adopt acts in accordance with Article 290 of the Treaty should be delegated to the Commission to establish re-use and refill targets for other products, to lay down further exemptions for other economic operators or to exempt specific packaging formats covered by the reuse or refill targets in case of severe hygiene, food safety or environmental issues preventing the achievement of these targets. Such delegated act should lay down the requirements for the preparation of life cycle assessments according to which exemptions from the obligation to reusable packaging pursuant to Article 4(2) of Directive 2008/98/EC can be justified. _________________ 60 Commission Recommendation of 6 May 2003 concerning the definition of micro, small and medium-sized enterprises (notified under document number C(2003) 1422) (OJ L 124, 20.5.2003, p. 36).
2023/05/12
Committee: ENVI
Amendment 606 #
(f) permeable tea or coffee bagsingle- serve units necessary to contain a tea or coffee product and intended to be used and disposed of together with the product;
2023/05/12
Committee: ENVI
Amendment 614 #
Proposal for a regulation
Article 3 – paragraph 1 – point 1 – point g
(g) coffee or teaprotective beverage system single- serve unit necessary to contain a coffee or tea product and intended to be used and disposed of together with the product;
2023/05/12
Committee: ENVI
Amendment 637 #
Proposal for a regulation
Article 3 – paragraph 1 – point 18 a (new)
(18a) ‘plastic packaging’ means a packaging that is wholly or predominantly made of plastic.
2023/05/12
Committee: ENVI
Amendment 694 #
Proposal for a regulation
Article 3 – paragraph 1 – point 32
(32) ‘recycled at scale’ means collected, sorted and recycled through installed state-of-the-artthe existence of a clear pathway and sufficient capacity for the collected packaging waste to be directed to defined and recognised waste streams through infrastructure and established processes, cover ing at least 75 % of the Unioctual systems proven in populerational environment, including packaging waste exported from the Union that meets the requirements of Article 47(5);
2023/05/12
Committee: ENVI
Amendment 715 #
Proposal for a regulation
Article 3 – paragraph 1 – point 34
(34) ‘integrated component’ means a packaging component that may be distinct from the main body of the packaging unit, and may be of a different material, but is integral to the packaging unit and its functioning and does not need to be separated from the main packaging unit in order to consume the product and is typically discarded at the same time asis recommended to be disposed together with the main body of the packaging unit, although not necessarily in the same disposal route;
2023/05/12
Committee: ENVI
Amendment 720 #
Proposal for a regulation
Article 3 – paragraph 1 – point 35
(35) ‘separate component’ means a packaging component that is distinct from the main body of the packaging unit, which may be of a different material, that needs to be disassembled completely and permanentlycan be manually disassembled from the main packaging unit in order to access the product, and that is typically discarded prior to and separately from the packaging unit. If elements are easily separable by the consumer they must be considered as separate components;
2023/05/12
Committee: ENVI
Amendment 859 #
Proposal for a regulation
Article 6 – paragraph 1
1. All packaging shall be recyclabplaced on the market shall be recyclable in accordance with paragraph 2 of this Article.
2023/05/12
Committee: ENVI
Amendment 882 #
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 1 – point b
(b) it is effectively and efficientlycan be recycled at scale so that it is included in a separately collectedion stream in accordance with Article 43(1) and (2);
2023/05/12
Committee: ENVI
Amendment 886 #
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 1 – point c
(c) it is sorted into defined waste streams without affecting the recyclability of other waste streams;
2023/05/12
Committee: ENVI
Amendment 896 #
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 1 – point d
(d) it can be recycled so that the resulting secondary raw materials are of sufficient quality to substitute the primary raw materials;
2023/05/12
Committee: ENVI
Amendment 898 #
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 1 – point e
(e) it can be recycled at scale.deleted
2023/05/12
Committee: ENVI
Amendment 916 #
Proposal for a regulation
Article 6 – paragraph 2 – subparagraph 2
Point (a) shall apply from 1 January 2030 and point (eb) shall apply from 1 January 2035.
2023/05/12
Committee: ENVI
Amendment 929 #
Proposal for a regulation
Article 6 – paragraph 3
3. Recyclable packaging shall, a) from either 1 January 2030, comply with the design for recycling criteria as laid down in the delegated acts adopted pursuant to paragraph 4or 36 months after the entry into force of the delegated acts adopted pursuant to paragraph 4, whichever is the latest, comply with design for recycling criteria, and, b) from either 1 January 2035, also with the recyclability at scale requirements laid down in the delegated acts adopted pursuant to paragraph 6or 36 months after the entry into force of the delegated acts adopted pursuant to paragraph 6, whichever is the latest, also comply with the recyclability at scale requirements. Where such packaging complies with those delegated acts, it shall be considered to comply with paragraph 2, points (a) and (eb).
2023/05/12
Committee: ENVI
Amendment 963 #
Proposal for a regulation
Article 6 – paragraph 4 – subparagraph 1
The Commission is empowered toBy 1 January 2027, the Commission shall adopt delegated acts in accordance with Article 58 to supplement this Regulation in order to establish design for recycling criteria and recycling performance grades based on the criteria and parameters listed in Table 2 of Annex II for packaging categories listed in Table 1 of that Annex II, as well as rules concerning the modulation of financial contributions to be paid by producers to comply with their extended producer responsibility obligations set out in Article 40(1), based on the packaging recycling performance grade, and for plastic packaging, the percentage of recycled content. Design-for- recycling criteria shall be based on existing sectoral voluntary approaches and EU harmonised standards and consider state of the art collection, sorting and recycling processes and shall cover all packaging components.
2023/05/12
Committee: ENVI
Amendment 969 #
Proposal for a regulation
Article 6 – paragraph 4 – subparagraph 2
The Commission is empowered to adopt delegated acts in accordance with Article 58 to amend Table 1 of Annex in order to adapt it to scientific and technical development in material and product design, collection, sorting and recycling infrastructure. Should the adoption of the above- mentioned delegated acts be delayed, a presumption of compliance with the requirements set out in paragraph 1 of this Article based on industry guidelines and EU harmonized standards on design for recycling shall apply from 1 January 2030 to all packaging placed on the Union market until such criteria are adopted. Requirements laid out in the delegated act should apply 3 years after the entry into force of such delegated act.
2023/05/12
Committee: ENVI
Amendment 1005 #
Proposal for a regulation
Article 6 – paragraph 6 – point b
(b) amounts of separately collected packaging waste, per packaging material listed in Table 1 of Annex II, in the Union as whole and in each Member State, taking into account Member States obligation under Article 43 of this Regulation;
2023/05/12
Committee: ENVI
Amendment 1008 #
Proposal for a regulation
Article 6 – paragraph 6 – point d
(d) installed infrastructure capacities for sorting and recycling in the Union as a whole for each packaging type listed in Table 1 of Annex II, taking into account Member States obligation under Article 43 of this Regulation. Requirements laid out in the delegated act should apply three years after the entry into force of such delegated act.
2023/05/12
Committee: ENVI
Amendment 1106 #
Proposal for a regulation
Article 7 – paragraph 1 – introductory part
1. From 1 January 2030, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from post-consumer plastic waste, per unit of packaging:
2023/05/12
Committee: ENVI
Amendment 1118 #
Proposal for a regulation
Article 7 – paragraph 1 – point a
(a) 30 % for contact sensitive plastic packaging made from polyethylene terephthalate (PET) as the major component;
2023/05/12
Committee: ENVI
Amendment 1129 #
(b) 10 % for contact sensitive plastic packaging made from plastic materials other than PET, except single use plastic beverage bottles;
2023/05/12
Committee: ENVI
Amendment 1148 #
Proposal for a regulation
Article 7 – paragraph 1 – subparagraph 1 (new)
Targets shall be calculated as an average of the plastic packaging placed by a producer on the Union market.
2023/05/12
Committee: ENVI
Amendment 1165 #
Proposal for a regulation
Article 7 – paragraph 2 – introductory part
2. From 1 January 2040, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from post-consumer plastic waste, per unit of packaging:
2023/05/12
Committee: ENVI
Amendment 1191 #
Proposal for a regulation
Article 7 – paragraph 2 – subparagraph 1 (new)
Targets shall be calculated as an average of the plastic packaging placed by a producer on the Union market.
2023/05/12
Committee: ENVI
Amendment 1206 #
Proposal for a regulation
Article 7 – paragraph 3 – point d a (new)
(da) lacquers, inks and adhesives
2023/05/12
Committee: ENVI
Amendment 1254 #
Proposal for a regulation
Article 7 – paragraph 7
7. By 31 December 2026, the Commission is empowered to adopt implementing acts establishing the methodology for the calculation and verification of the percentage of recycled content recovered from post-consumer plastic waste, per unit of plastic packaging, and the format for the technical documentation referred to in Annex VII. The methodology shall be based on an EU harmonized fuel-exempt mass balance chain of custody method.Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3).
2023/05/12
Committee: ENVI
Amendment 1292 #
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 1
By 31 JanuaryDecember 20285, the Commission shall assess the need for derogations from the minimum percentage laid down in paragraph 1, points a, b and d, for specific plastic packaging, or for the revision of the derogation established under paragraph 3 for specific plastic packaging.
2023/05/12
Committee: ENVI
Amendment 1295 #
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 1 a (new)
By 31 December 2035, the Commission shall assess the need for derogations from the minimum percentages laid down in paragraph 2, point a, b and c for specific plastic packaging, or for the revision of the derogation established under paragraph 3 for specific plastic packaging.
2023/05/12
Committee: ENVI
Amendment 1297 #
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 1 b (new)
These assessments shall be based on market availability and prices of recycled plastics on an annual basis from the year of entry into force of this Regulation. These assessments shall consider Eurostat data for the EU-27 achieved plastic packaging recycling levels, recycled plastic price indices and annual rates of price change based on a monitoring tool to be established by the European Commission, and be based on the uptake of new recycling technologies and their impact on available market volumes.
2023/05/12
Committee: ENVI
Amendment 1301 #
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 2 – introductory part
Based on this assessment, the Commission is empowered toshall, at the latest by 31 December 2026 and by 31 December 2036 respectively, adopt delegated acts in accordance with Article 58 to amend this Regulation in order to:
2023/05/12
Committee: ENVI
Amendment 1306 #
Proposal for a regulation
Article 7 – paragraph 9 – subparagraph 2 – point a
(a) provide for derogations from the scope, timing or level of minimum percentage laid down in paragraph 1, points a, b and d, and in paragraph 2, points a, b and c for specific plastic packaging, and, as appropriate,
2023/05/12
Committee: ENVI
Amendment 1349 #
Proposal for a regulation
Article 8 – paragraph 1
1. By [OP: please insert the date = 24 months from the entry into force of this Regulation], packaging referred to in Article 3(1), points (f) and (g), sticky labels attached to fruit and vegetables and very lightweight plastic carrier bags shall be compostable in industrially controlled conditions in bio- waste treatment facilities.
2023/05/12
Committee: ENVI
Amendment 1425 #
Proposal for a regulation
Article 9 – paragraph 2
2. Packaging not necessary to comply with any of the performance criteria set out in Annex IV and packaging with characteristics that are only aimed to increase the perceived volume of the product, including double walls, false bottoms, and unnecessary layers, shall not be placed on the market, unless the packaging design is subject to geographical indications of origin protected under Union legislation.
2023/05/12
Committee: ENVI
Amendment 1699 #
Proposal for a regulation
Article 22
Restrictions on use of certain packaging 1. Economic operators shall not place on the market packaging in the formats and for the purposes listed in Annex V. 2. By way of derogation from paragraph 1, economic operators shall not place on the market packaging in the formats and for the purposes listed in point 3 of Annex V as of 1 January 2030. 3. Member States may exempt economic operators from point 3 of Annex V if they comply with the definition of micro- company in accordance with rules set out in the Commission Recommendation 2003/361, as applicable on [OP: Please insert the date = the date of entry into force of this Regulation], and where it is not technically feasible not to use packaging or to obtain access to infrastructure that is necessary for the functioning of a reuse system. 4. The Commission shall be empowered to adopt delegated acts in accordance with Article 58 to amend Annex V in order to adapt it to technical and scientific progress with the objective to reducing packaging waste. When adopting those delegated acts, the Commission shall consider the potential of the restrictions on the use of specific packaging formats to reduce the packaging waste generated while ensuring an overall positive environmental impact, and shall take into account the availability of alternative packaging solutions that meet requirements set out in legislation applicable to contact sensitive packaging, as well as their capability to prevent microbiological contamination of the packaged product.Article 22 deleted formats
2023/05/12
Committee: ENVI
Amendment 1894 #
Proposal for a regulation
Article 26 – paragraph 5
5. The manufacturer and the final distributor making available on the market within the territory of a Member State in sales packaging alcoholic beverages in the form of wine, with the exception of sparkling wine, shall ensure that: (a) from 1 January 2030, 5 % of those products are made available in reusable packaging within a system for re-use or by enabling refill; (b) from 1 January 2040, 15 % of those products are made available in reusable packaging within a system for re-use or by enabling refill.deleted
2023/05/12
Committee: ENVI