BETA

Activities of Edit HERCZOG related to 2011/0172(COD)

Plenary speeches (1)

Energy efficiency (debate)
2016/11/22
Dossiers: 2011/0172(COD)

Amendments (6)

Amendment 272 #
Proposal for a directive
Recital 28
(28) Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions includes energy efficiency among the criteria for determining the Best Available Techniques that should serve as a reference for setting the permit conditions for installations within its scope, including combustion installations with a total rated thermal input of 50 MW or more. However, that Directive gives Member States the option not to impose requirements relating to energy efficiency on combustion units or other units emitting carbon dioxide on the site, for the activities listed in Annex I to Directive 2003/87/EC of the European Parliament and of the Council of 13 October 2003 establishing a scheme for greenhouse gas emission allowance trading within the Community. To ensure that significant energy efficiency improvements are achieved in electricity and heat generation installations and mineral oil and gas refineries, actual energy efficiency levels should be monitored and compared with the relevant energy efficiency levels associated with the application of the Best Available Techniques. The Commission should compare energy efficiency levels and consider proposing additional measures if significant discrepancies exist between the actual energy efficiency levels and the levels associated with the application of the Best Available Techniques. The information collected on the actual energy efficiency values should also be used in reviewing the harmonised efficiency reference values for separate production of heat and electricity set out in Commission Decision 2007/74/EC of 21 December 2006.
2011/11/16
Committee: ITRE
Amendment 274 #
Proposal for a directive
Recital 28 a (new)
(28 a) Any measure in this Directive, which applies to energy intensive industries recognized as exposed to significant risk of carbon leakage under ETS must consider the competitiveness of these industries and therefore should be cost effective.
2011/11/16
Committee: ITRE
Amendment 974 #
Proposal for a directive
Article 8 – paragraph 1 – subparagraph 4
In case of heating and cooling, where a building is supplied from a district heating network, a heat meter shall be installed at the building entry. In multi-apartment buildings, individual heat consumption meters shall also be installed to measure the consumption of heat or cooling for each apartment. Where the use of individual heat consumption meters is not technically and economically feasible, individual heat cost allocators, in accordance with the specifications in Annex VI(1.2), shall be used for measuring heat consumption at each radiator.
2011/11/17
Committee: ITRE
Amendment 1327 #
Proposal for a directive
Article 11 – paragraph 1
Member States shall draw up an inventory of data in accordance with Annex X for all installations undertaking the combustion of fuels with total rated thermal input of 50 MW or more and installations undertaking the refining of mineral oil and gas within their territory. This shall be updated every three years. The annual installation-specific data contained in these inventories shall be made available to the Commission upon request. Member States shall include a non-confidential summary containing aggregated information of the inventories in the reports referred to in Article 19(2).
2011/11/18
Committee: ITRE
Amendment 1526 #
Proposal for a directive
Article 19 – paragraph 5 – subparagraph 1
The Commission's assessment of the first supplementary report shall include an assessment of the energy efficiency levels of existing and new installations undertaking the combustion of fuels with a total rated thermal input of 50 MW or more and installations undertaking the refining of mineral oil and gas, in the light of the relevant best available techniques as developed in accordance with Directive 2010/75/EU and Directive 2008/1/EC. Where this assessment identifies significant discrepancies between the actual energy efficiency levels of such installations and energy efficiency levels associated with the application of the relevant best available techniques, the Commission shall propose, if appropriate, requirements to improve the energy efficiency levels achieved by such installations or that the use of such techniques shall in future be a condition for the permitting of new installations and for the periodic review of the permits for existing installations.
2011/11/22
Committee: ITRE
Amendment 1783 #
Proposal for a directive
Annex X – point d
(d) a non-nominative list of installations undertaking the refining of mineral oil and gas, indicating for each: – annual average installation energy input (MWth); – annual average installation energy output (energy content of the fuel mix, MWth); – annual average feedstock; – plant type and technology employed at the installation; – design efficiency (theoretical); – operation start date; – date of last substantial refurbishment; – the number of annual average operating hours; – annual average net operational efficiency.deleted
2011/11/22
Committee: ITRE