7 Amendments of Jan HUITEMA related to 2019/0101(COD)
Amendment 40 #
Proposal for a regulation
Recital 9
Recital 9
(9) In order to allow manufacturers to comply with the Euro 6 emission limits in the context of RDE test procedure, the compliance criteria for RDE should be introduced in two steps. During the first step, upon the request of the manufacturer, a temporary conformity factor should apply, while as a second step only the final conformity factor should be used. The Commission should keep under review the final conformity factors in lightwill apply the final conformity. The Commission should adjust downwards the margin of error used to calculate the final conformity factor every year as a result of the improved accuracy of the measuring procedure ofr technical progress of PEMS equipment.
Amendment 48 #
Proposal for a regulation
Recital 9 a (new)
Recital 9 a (new)
(9 a) The Commission should establish ambitious and robust requirements for PEMS measuring equipment that may be used for RDE tests. These requirements should ensure the use of the best available PEMS equipment to ensure accurate measurement of air pollutants, including NOx and number of particles (PN).
Amendment 53 #
Proposal for a regulation
Recital 9 b (new)
Recital 9 b (new)
(9 b) In order to reduce air pollution, the emission limits standards for NOx (and other particle) emissions need to be revised downwards in the post-Euro 6 legislative proposal. Therefore, it is of utmost importance that the Commission present the post-Euro-6 legislative proposal as soon as possible, and at the latest by June 2021, in line with the commitments made under the European Green Deal ensuring a pathway towards zero-emission mobility.
Amendment 74 #
Proposal for a regulation
Article 1 – paragraph 1 – point 10
Article 1 – paragraph 1 – point 10
Regulation (EC) No 715/2007
Article 14 – paragraph 3 – point a a (new)
Article 14 – paragraph 3 – point a a (new)
(a a) amending this Regulation in order to establish ambitious requirements for PEMS measuring equipment, based on the best available techniques, to ensure accurate measurement of air pollutants. Results of those measurements shall be submitted in a unified form and shall be made publicly available online across the Union.
Amendment 81 #
Proposal for a regulation
Article 1 – paragraph 1 – point 10
Article 1 – paragraph 1 – point 10
Regulation (EC) No 715/2007
Article 14 – paragraph 3 – point b
Article 14 – paragraph 3 – point b
(b) amending this Regulation in order to adapt to technical progresreview annually downwards the pollutant-specific final conformity factors set out in Table 2a to Annex I.;
Amendment 92 #
Proposal for a regulation
Annex – paragraph 1
Annex – paragraph 1
Regulation (EC) No 715/2007
Annex I – table 2a – row 2
Annex I – table 2a – row 2
CF 1,43 1 + margin 1,5+ - - - pollutant- final (2) of error margin of -final (2) (margin error =0,32*) (margin =0,5*) * To be revised downwards on the basis of the imminent assessment of the Joint Research Centre. (2) CF pollutant-final is the conformity factor used to determine compliance with the Euro 6 emission limits by taking into account the technical uncertainties linked with the use of the Portable Emission Measurement Systems (PEMS). It is therefore expressed as 1 + a margin of error.
Amendment 99 #
Proposal for a regulation
Annex – paragraph 1
Annex – paragraph 1