BETA

8 Amendments of Andreas SCHWAB related to 2008/0100(COD)

Amendment 42 #
Proposal for a regulation
Recital 9
(9) It is appropriate to establish the principle that vehicles must be designed, constructed and assembled so as to minimise the risk of injury to the vehicle occupants and to other road users. For this purpose, it is necessary that manufacturers ensure that vehicles comply with the relevant requirements set out in this Regulation. These provisions should include, but not be limited to, requirements relating to vehicle structural integrity, systems to aid the driver’s control of the vehicle, systems to provide the driver with visibility and information on the state of the vehicle and the surrounding area, vehicle lighting systems, vehicle occupant protection systems, continuous damping control systems, being systems that precisely adjust the dampers to the vehicle’s weight and driving situation, the vehicle exterior and accessories, vehicle masses and dimensions, vehicle tyres, advanced vehicle systems and miscellaneous items. In addition, it is necessary that vehicles comply with specific provisions relating to certain goods vehicles and their trailers, or specific provisions relating to buses, as the case may be.
2008/11/18
Committee: IMCO
Amendment 51 #
Proposal for a regulation
Recital 14
(14) Electronic Stability Control Systems, Advanced Emergency Braking Systems and Lane Departure Warning Systems have a high potential to produce considerable casualty reductions. Therefore requirements for such systems should be established for those vehicle categories in which their application is appropriate and for which it is demonstrated that they will improve the overall level of safety. Sufficient lead time until implementation should be provided to allow for implementation measures to be completed and subsequently for development and in- vehicle application of these complex technologies.
2008/11/18
Committee: IMCO
Amendment 52 #
Proposal for a regulation
Recital 14 a (new)
(14a) In setting detailed implementation deadlines for electronic stability control systems, a lead time of 12 months after completion of implementation measures should be allowed before the initial mandatory implementation deadline. After this initial deadline, lead times for mandatory implementation for each vehicle category should follow the timings published in regulation UN/ECE R13.11.
2008/11/18
Committee: IMCO
Amendment 65 #
Proposal for a regulation
Article 5 - paragraph 3
3. The Commission shall determine to which categories of vehicles among those mentioned in Article 2 the requirements set out in paragraphs 1 and 2 of this Article shall apply. Those measures, designed to amend non- essential elements of this Regulation, by supplementing it, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 40(2) of Directive 2007/46/ECrequirements set out in paragraphs 1 and 2 shall apply to the vehicles, components and separate technical units referred to in Annex -I.
2008/11/18
Committee: IMCO
Amendment 70 #
Proposal for a regulation
Article 6 - paragraph 6
6. The Commission shall set out additional safety requirements for vehicles intended for the transport of dangerous goods by road within or between Member StaVehicles intended for the transport of dangerous goods by road within the meaning of Directive 2008/68/EC shall comply with additional safety requirements to be established by the Commission with regard to, inter alia, electrical installations, fire risks, braking and speed limiters, with a view to minimising the risk and consequences of accidents and taking account of the nature and characteristics of the goods transportesd.
2008/11/18
Committee: IMCO
Amendment 98 #
Proposal for a regulation
Article 11 - paragraph 1 a (new)
1a. With effect from 12 month after the adoption of technical measures in respect of this Regulation, implementation dates for electronic stability control systems for vehicles of categories M2, M3, N2 , N3 should be determined following the lead times set out in regulation UN/ECE R13.11.
2008/11/18
Committee: IMCO
Amendment 102 #
Proposal for a regulation
Article 11 - paragraph 2 a (new)
2a. With effect from 12 month after the adoption of technical measures in respect of this Regulation, implementation dates for electronic stability control systems for vehicles of categories M2, M3, N2 and N3 should be determined following the lead times set out in regulation UN/ECE R13.11.
2008/11/18
Committee: IMCO
Amendment 132 #
Proposal for a regulation
Annex - I (new)
Scope of application of the requirements set out in Article 5, paragraphs 1 and 2. Subject Fuel tanks/rear protective X X devices Rear registration plate X X Steering effort X X Door latches and hinges X Audible warning X X Indirect vision devices X X Braking X X Radio interference X X (electromagnetic compatibility) Interior fittings Anti-theft and immobiliser X X Protective steering X Seat strength X X Exterior projections Speedometer X X Plates (statutory) X X Seat belt anchorages X X X X Installation of lighting X X X X and light signalling devices Retro reflectors X X X X End-outline, front- X X X X position (side), rear- position (side), stop, side marker, daytime running lamps Direction indicators X X X X Rear registration plate X X X X lamps Headlamps (including X X X X bulbs) Front fog lamps X X X X Towing hooks X X X X Rear fog lamps X X X X Reversing lamps X X X X Parking lamps X X X X Seat belts and restraint X X X X systems Forward vision Identification of controls, X X X X tell-tales and indicators Defrost/demist X ( ( ( Wash/wipe X ( ( ( Heating systems X X X X Wheel guards Head restraints Lateral protection X Spray-suppression systems X Safety glazingApplicability M M M N N N O O O O 1 2 3 1 2 3 1 2 3 4 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X ( ( 1 1 1 1 1 ) ) ) ) ) ( ( 2 2 2 2 2 ) ) ) ) ) X X X X X X X X X X X X X X X X X X X X X X X X X X X TyresX X X X X X X X Speed limitation devices X X X Masses and dimensions X X X X X External projections of X X cabs Couplings X X X X X Flammability Buses and coaches X Frontal impact Side impact X Vehicles intended for the X X transport of dangerous goods ( ( Front underrun protectionX ( ( ( ( ( ( 3 3 3 3 3 3 ) ) ) ) ) ) X X X ( 5 ) X ( ( 6 6 ) ) X X X X X ( ( ( ( ( 4 4 4 4 4 4 4 ) ) ) ) ) ) ) X X
2008/11/18
Committee: IMCO