Activites

• 2014/03/29 Final act published in Official Journal
  • Directive 2014/34
  • OJ L 096 29.03.2014, p. 0309
• 2014/02/26 Final act signed
• 2014/02/26 End of procedure in Parliament
• #3295
• 2014/02/20 Council Meeting
• 2014/02/20 Act adopted by Council after Parliament's 1st reading
• 2014/02/05 Results of vote in Parliament
  • Results of vote in Parliament
  • T7-0084/2014 summary

    The European Parliament adopted by 646 votes to 13, with 12 abstentions, a legislative resolution on the proposal for a directive of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast). Parliament adopted its position at first reading following the ordinary legislative procedure. The amendments adopted in plenary are the result of an agreement reached between the European Parliament and the Council. They amended the proposal as follows: Further align the Directive to the “new legislative framework” and ensure legal certainty: the amendments made by the Parliament seek to ensure that the proposed Directive is more consistent with the terms used by Decision No 768/2008/EC and to eliminate any inconsistencies in the text which could otherwise create legal uncertainty. Purpose and scope: the objective of this Directive is to ensure that products on the market fulfil the requirements providing for a high level of protection of health and safety of persons, especially workers, and, where appropriate, protection of domestic animals and property. This Directive covers products which are new to the Union market when they are placed on the market; that is to say they are either new products made by a manufacturer established in the Union or products, whether new or second-hand, imported from a third country. It should apply to components intended to be incorporated into equipment and protective systems intended for use in potentially explosive atmospheres. This Directive should apply to all forms of supply, including distance selling. Obligations of economic operators: manufacturers should ensure that each product is accompanied by a copy of the EU declaration of conformity or of the attestation of conformity, as appropriate. However, where a large number of products is delivered to a single user, the batch or consignment concerned may be accompanied by a single copy. They should also ensure that products, other than components, which they have placed on the market bear the specific marking of explosion protection. In order to protect the health and safety of end-users, manufacturers and importers should: carry out sample testing of products made available on the market, investigate non-conforming products and product recalls, if necessary, keep a register of complaints, of non-conforming products and product recalls, and keep distributors informed of any such monitoring; indicate, on the product, their name, registered trade name or registered trade mark and the postal address at which they can be contacted or, where that is not possible, on its packaging or in a document accompanying the product. Distributors who consider or have reason to believe that a product which they have made available on the market is not in conformity with this Directive should make sure that the corrective measures necessary to bring that product into conformity, to withdraw it or recall it, if appropriate, are taken. In order to increase consumer protection, manufacturers should ensure that the product is accompanied by instructions and safety information in a language which can be easily understood by end-users, as determined by the Member State concerned. Such instructions and safety information, as well as any labelling, shall be clear, understandable and intelligible. In order to facilitate communication between economic operators, market surveillance authorities and end-users, Member States should encourage economic operators to include a website address in addition to the postal address. Before making a product available on the market, distributors shall verify that it bears the CE marking, that it is accompanied by the EU declaration of conformity, by the required documents and by the instructions and safety information. CE marking: Parliament enhanced the rules as regards the CE marking. Specific, clear marking of equipment and protective systems, stating their use in a potentially explosive atmosphere, has also been introduced. Parliament called on the Member States to build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall take appropriate action in the event of improper use of that marking. Notified bodies: a conformity assessment body shall have the means necessary to perform the technical and administrative tasks connected with the conformity assessment activities in an appropriate manner and shall have access to all necessary equipment or facilities. The impartiality of the conformity assessment bodies, their top level management and of the personnel responsible for carrying out the conformity assessment tasks shall be guaranteed. Market surveillance: Member States should take all appropriate measures to ensure that products covered by this Directive may be placed on the market only if, when properly stored and used for their intended purpose, or under conditions of use which can be reasonably foreseen, they do not endanger the health and safety of persons. Restrictive measures in case of non-compliance: Member States should ensure that appropriate restrictive measures, such as withdrawal of the product concerned, are taken in respect of the measuring instrument concerned without delay. Rules on penalties applicable to infringements by economic operators may include criminal penalties for serious infringements. These penalties should be effective, proportionate and dissuasive. Stock: distributors should therefore be able to supply products that have been placed on the market, namely stock that is already in the distribution chain, before the date of application of national measures transposing this Directive. Implementing measures: in order to ensure uniform conditions for the implementation of this Directive, implementing powers should be conferred on the Commission. On duly justified imperative grounds of urgency relating to the protection of health and safety of persons, the Commission should adopt immediately applicable implementing acts. When matters relating to this Directive, other than its implementation or infringements, are being examined, i.e. in a Commission expert group, the European Parliament should receive full information and documentation and, where appropriate, an invitation to attend such meetings.

• 2014/02/04 Debate in Parliament
  • Debate in Parliament
• 2012/07/25 Committee report tabled for plenary, 1st reading/single reading
  • A7-0255/2012 summary

    The Committee on the Internal Market and Consumer Protection adopted the report by Zuzana ROITHOVÁ (EPP, CZ) on the proposal for a directive of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast). The committee recommends that the European Parliament’s position adopted at first reading, under the ordinary legislative procedure, should amend the Commission proposal as follows: Further align the Directive with the new legislative framework and ensure legal certainty: Members consider it important to bring a number of changes to the proposed Directive in order to reach a higher level of consistency with the terms used by the Decision No 768/2008/EC and eliminate the possible inconsistencies in the text which could otherwise create legal uncertainty. They also consider it important to clarify the legal situation for products which have been legally placed on the market in compliance with the current Directive before the new Directive applies, but which are still in stock. They propose that economic operators should be able to sell stocks of non-automatic weighing instruments that are already in the distribution chain on the date of application of national measures transposing this Directive. Obligations imposed on economic operators: an amendment stipulates that manufacturers shall indicate, on the instrument (or on the label if this is not possible), their name, registered trade name or registered trade mark the postal, or, if available, the website address at which they can be contacted. The contact details shall be in a language easily understood by end-users and market surveillance authorities. With a view to enhancing consumer protection, Members state that such instructions and safety information as well as any labelling shall be clear, understandable and intelligible. Moreover, they consider that all obligations imposed on economic operators by this Directive should also apply in the case of distance selling. EU declaration of conformity: upon request of the market surveillance authority, the economic operator shall provide a copy of the EU declaration of conformity in paper form or by electronic means and shall ensure that it is translated into the language or languages required by the Member State in which market the non-automatic weighing instruments is placed or made available. To cut red tape, Members state that when issuing a single EU declaration of conformity could cause specific problems due to the complexity or scope of that single EU declaration, it should be possible to replace that single EU declaration by individual EU declarations of conformity. Restrictive measures in the case of non-compliance: appropriate restrictive measures should be taken, such as withdrawal of the instrument from their market, without delay. Improve market surveillance: Members propose that the Member States: (i) provide, on an annual basis, the Commission with details of the activities of their market surveillance authorities; (ii) provide adequate funding to their market surveillance authorities in order to ensure that their activities are coherent and effective across the Union. Improper marking and penalties: Members call on the Member States to build upon existing mechanisms to ensure correct application of the regime governing the CE marking and to take appropriate action in the event of improper use of the marking. Rules on penalties applicable to infringements by economic operators may include criminal penalties for serious infringements. The penalties shall be effective, proportionate to the seriousness of the offence. Transparency: the Commission should have the obligation to publish on the Internet the national provisions of transposed Directive and relevant sanctions.

• 2012/07/10 Vote in committee, 1st reading/single reading
• 2011/11/30 Committee referral announced in Parliament, 1st reading/single reading
• 2011/11/21 Legislative proposal published
  • COM(2011)0772 summary

    PURPOSE: to align Directive 94/9/EC on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres with the new legislative framework, in particular to Decision No 768/2008/EC establishing a common framework for the marketing of products (Goods Package). PROPOSED ACT: Directive of the European Parliament and of the Council.  BACKGROUND: experience with the implementation of Union harmonisation legislation has shown – on a cross-sector scale – certain weaknesses and inconsistencies in the implementation and enforcement of this legislation, leading to: the presence of non-compliant or dangerous products on the market and consequently a certain lack of trust in CE marking; competitive disadvantages for economic operators complying with the legislation as opposed to those circumventing the rules; unequal treatment in the case of non-compliant products and distortion of competition amongst economic operators due to different enforcement practices; differing practices in the designation of conformity assessment bodies by national authorities; problems with the quality of certain notified bodies. To remedy these horizontal shortcomings in Union harmonisation legislation observed across several industrial sectors, the “New Legislative Framework” was adopted in 2008 as part of the goods package. Its objective is to strengthen and complete the existing rules and to improve practical aspects of their application and enforcement. The New Legislative Framework (NLF) consists of two complementary instruments, Regulation (EC) No 765/2008 on accreditation and market surveillance and Decision No 768/2008/EC establishing a common framework for the marketing of products. This proposal on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres is presented in the framework of the implementation of the “goods package” adopted in 2008. It is part of a package of proposals aligning ten product directives to Decision No 768/2008/EC establishing a common framework for the marketing of products. IMPACT ASSESSMENT: based on the information collected, the Commission carried out an impact assessment which examined and compared three options: Option 1 – No changes to the current situation; Option 2 – Alignment to the NLF Decision by non-legislative measures; Option 3 – Alignment to NLF Decision by legislative measures: this option consists in integrating the provisions of the NLF Decision into the existing directives. Option 3 was found to be the preferred option for the following reasons: (i) it will improve the competitiveness of companies and notified bodies taking their obligations seriously, as opposed to those cheating on the system; (ii) it will improve the functioning of the internal market by ensuring equal treatment of all economic operators, notably importers and distributors, as well as notified bodies; (iii) it does not entail significant costs for economic operators and notified bodies; (iv) it is considered more effective than option 2: due to the lack of enforceability of option 2 it is questionable that the positive impacts would materialise under that option. LEGAL BASIS: Article 114 of the Treaty on the Functioning of the European Union (TFEU). CONTENT: the alignment to the NLF Decision requires a number of substantive amendments to the provisions of Directive 94/9/EC. To ensure the readability of the amended text, the technique of recasting has been chosen. The proposal does not change the scope of Directive and the essential health and safety requirements. The main elements of the proposal are as follows: Horizontal definitions: the proposal introduces harmonised definitions of terms which are commonly used throughout Union harmonisation legislation and should therefore be given a consistent meaning throughout that legislation. Obligations of economic operators and traceability requirements: the proposal clarifies the obligations of manufacturers and introduces obligations for importers and distributors. Importers must verify that the manufacturer has carried out the applicable conformity assessment procedure and has drawn up a technical documentation. They must also make sure with the manufacturer that this technical documentation can be made available to authorities upon request. Furthermore importers must verify that the products are correctly marked and accompanied by instructions and safety information. They must keep a copy of the Declaration of conformity and indicate their name and address on the product, or where this is not possible on the packaging or the accompanying documentation. Distributors must verify that the products bear the CE marking, the name of the manufacturer and of the importer, if relevant, and that it is accompanied by the required documentation and instructions. Harmonised standards: compliance with harmonised standards provides a presumption of conformity with the essential requirements. On 1 June 2011, the Commission adopted a proposal for a Regulation on European Standardisation that sets out a horizontal legal framework for European standardisation. The proposal for the Regulation contains inter alia provisions on standardisation requests from the Commission to the European Standardisation Organisations, on the procedure for objections to harmonised standards and on stakeholder participation in the standardisation process. Consequently the provisions of Directive 94/9/EC which cover the same aspects have been deleted in this proposal for reasons of legal certainty. The provision conferring presumption of conformity to harmonised standards has been modified to clarify the extent of the presumption of conformity when standards only partially cover the essential requirements. Conformity assessment and CE marking: Directive 94/9/EC on the placing on the market of products has selected the appropriate conformity assessment procedures which manufacturers have to apply in order to demonstrate that their products comply with the essential safety requirements. The proposal aligns these procedures to their updated versions set out in the NLF Decision. Notified Bodies: the proposal reinforces the notification criteria for notified bodies. It clarifies that subsidiaries or subcontractors must also comply with the notification requirements. Specific requirements for notifying authorities are introduced, and the procedure for notification of notified bodies is revised. The competence of a notified body must be demonstrated by an accreditation certificate. Market surveillance and the safeguard clause procedure: the proposal revises the existing safeguard clause procedure. It introduces a phase of information exchange between Member States, and specifies the steps to be taken by the authorities concerned, when a non-compliant article is found. BUDGETARY IMPLICATIONS: this proposal does not have any implications for the EU budget. DELEGATED ACTS: the proposal contains provisions empowering the Commission to adopt delegated acts in accordance with Article 290 of the Treaty on the Functioning of the European Union.

  • DG {'url': 'http://ec.europa.eu/enterprise/', 'title': 'Enterprise and Industry'}, TAJANI Antonio

Documents

• Legislative proposal published: COM(2011)0772
• Committee report tabled for plenary, 1st reading/single reading: A7-0255/2012
• Debate in Parliament: Debate in Parliament
• Results of vote in Parliament: Results of vote in Parliament
• Decision by Parliament, 1st reading/single reading: T7-0084/2014
• : Directive 2014/34
• : OJ L 096 29.03.2014, p. 0309

History

(these mark the time of scraping, not the official date of the change)