BETA


2014/0108(COD) Personal protective equipment

Progress: Procedure completed

RoleCommitteeRapporteurShadows
Lead IMCO FORD Vicky (icon: ECR ECR) ARIMONT Pascal (icon: PPE PPE), WESTPHAL Kerstin (icon: S&D S&D), ROCHEFORT Robert (icon: ALDE ALDE), DURAND Pascal (icon: Verts/ALE Verts/ALE)
Former Responsible Committee IMCO
Committee Opinion EMPL AGEA Laura (icon: EFDD EFDD)
Committee Opinion ENVI
Committee Opinion ITRE
Former Committee Opinion EMPL Guillaume BALAS (icon: S&D S&D)
Former Committee Opinion ENVI
Former Committee Opinion ITRE
Lead committee dossier:
Legal Basis:
TFEU 114

Events

2016/03/31
   Final act published in Official Journal
Details

PURPOSE: to update internal market rules for personal protective equipment, in order to enhance consumer safety and ensure fair competition between companies.

LEGISLATIVE ACT: Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC.

CONTENT: the new Regulation updates the existing rules in directive 89/686/EEC. It lays down requirements for the design and manufacture of personal protective equipment (PPE), which is to be made available on the market, in order to ensure protection of the health and safety of users and establish rules on the free movement of PPE in the Union.

Scope: personal protective equipment offers protection against all kinds of hazards (e.g. heat, flames, chemicals, flying particles, mechanical shocks, etc.) in a range of different environments, whether it be the home, at work or on the sports field.

Examples include: head/ear/eye protection, breathing protection, body protection, and hand/leg/foot protection. Products intended for private use to protect against atmospheric conditions that are not of an extreme nature or to protect against damp and water, including dishwashing gloves, fall outside of the scope of the Regulation.

This Regulation covers PPE which is new to the Union market when it is placed on the market; that is to say, it is either new PPE made by a manufacturer established in the Union or PPE, whether new or second-hand, imported from a third country. It applies to all forms of supply, including distance selling.

Obligations of economic operators (manufacturers, importers, distributors): all economic operators intervening in the supply and distribution chain must take appropriate measures to ensure that they make available on the market only PPE which is in conformity with the Regulation. In particular, manufacturers must ensure that PPE has been designed and manufactured in accordance with the applicable essential health and safety requirements set out in Annex II. They must:

· implement the conformity assessment procedures established by the Regulation. These procedures are linked to the degree of risk involved;

· keep the technical documentation and the EU declaration of conformity for 10 years after the PPE has been placed on the market;

· carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring;

· ensure that the PPE which they place on the market bears a type, batch or serial number or other element allowing its identification;

· indicate, on the PPE, their name, registered trade name or registered trade mark and the postal address at which they can be contacted or, where that is not possible, on its packaging or in a document accompanying the PPE;

· ensure that instructions and safety information , as well as any labelling, is clear, understandable, intelligible and legible;

· further to a reasoned request from a competent national authority , provide it with all the information and documentation, in paper or electronic form, necessary to demonstrate the conformity of the PPE with the Regulation, in a language which can be easily understood by that authority;

· immediately take the corrective measures necessary to bring PPE into conformity, to withdraw it or to recall it, as appropriate.

For their part, importers must make sure that they do not place on the market PPE which does not comply with requirements or which present a risk. They must also make sure that the conformity assessment procedures have been carried out and that the CE marking and technical documentation drawn up by manufacturers are available for inspection by the competent national authorities.

CE marking : the CE marking shall be affixed before the PPE is placed on the market and affixed visibly, legibly and indelibly to the PPE or affixed to the packaging and to the accompanying documents. The CE marking and, where applicable, the identification number of the notified body may be followed by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall take appropriate action in the event of improper use of that marking.

Notifying authorities : the Regulation sets requirements for notifying authorities responsible for conformity assessment bodies. These bodies must apply the conformity assessment procedures without creating unnecessary burdens for economic operators . Interested parties have the right to appeal against the result of a conformity assessment carried out by a notified body.

Market surveillance : in the context of aligning the legislation on PPE with the new legislative framework for the marketing of products, and in order to ensure legal certainty, the rules on Union market surveillance and control of products entering the Union market provided for in Regulation (EC) No 765/2008 apply to PPE covered by this Regulation.

The new Regulation also contains provisions regarding procedures at national level for dealing with PPE presenting a risk, Union safeguard procedures, and compliant PPE which presents a risk to health and safety.

Transitional provisions: Member States shall not impede the making available on the market of products covered by Directive 89/686/EEC which are in conformity with that Directive and which were placed on the market before 21 April 2019.

ENTRY INTO FORCE: 20.4.2016.

APPLICATION: from 21.4.2018, with the exception of certain provisions which apply from

21.10.2016 or from 21.3.2018.

DELEGATED ACTS: the Commission may adopt delegated acts in respect of amending the categories of risks against which the PPE is intended to protect users. The power to adopt delegated acts shall be conferred on the Commission for a period of 5 years (which may be tacitly extended) from 21 April 2018. The European Parliament or the Council may raise objections to a delegated act within two months from the date of notification (which may be extended by two months). If the European Parliament or the Commission raise objections, the delegated act will not enter into force.

2016/03/16
   EC - Commission response to text adopted in plenary
Documents
2016/03/09
   CSL - Draft final act
Documents
2016/03/09
   CSL - Final act signed
2016/02/12
   EP/CSL - Act adopted by Council after Parliament's 1st reading
2016/02/12
   EP - End of procedure in Parliament
2016/02/12
   CSL - Council Meeting
2016/01/20
   EP - Results of vote in Parliament
2016/01/20
   EP - Decision by Parliament, 1st reading
Details

The European Parliament adopted by 577 votes to 48, with 86 abstentions, a legislative resolution on the proposal for a regulation of the European Parliament and of the Council on personal protective equipment.

Parliament’s position, adopted at first reading following the ordinary legislative procedure, amended the Commission proposal as follows:

Purpose and scope : the Regulation lays down requirements for the design and manufacture of personal protective equipment (PPE) which is to be made available on the market, in order to ensure protection of the health and safety of users .

Amendments aiming to include in the scope of the Regulation equipment to protect against cleaning materials of weak action or prolonged contact with water. Other substances and mixtures which are hazardous to health include atmospheres with oxygen deficiency and harmful biological agents which are now inserted into Annex I, Category III which includes exclusively the risks that may cause very serious consequences such as death or irreversible damage to health.

Excluded from the scope of the legislation are PPE:

designed to be used for self-defence, with the exception of PPE intended for sporting activities; designed for private use to protect against atmospheric conditions that are not of an extreme nature and damp and water during dishwashing; for exclusive use on seagoing vessels or aircraft that are subject to the relevant international treaties applicable in Member States; for head, face or eye protection of users, that is covered by Regulation No 22 of the United Nations Economic Commission for Europe on uniform provisions concerning the approval of protective helmets and their visors for drivers and passengers of motor cycles and mopeds.

Definitions : PPE should also mean:

equipment designed and manufactured to be worn or held by a person for protection against one or more risks to that person's health or safety; connexion systems for equipment that are not held or worn by a person, that are designed to connect that equipment to an external device or to a reliable anchorage point, that are not designed to be permanently fixed and that do not require fastening works before use.

Obligations of economic operators (manufacturers, importers, distributors) :

Manufacturers and importers shall, when deemed appropriate with regard to the risks presented by PPE, carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring.

Manufacturers shall:

ensure that the PPE is accompanied by the instructions and information, as well as any labelling, shall be clear, understandable, intelligible and legible; either provide the EU declaration of conformity with the PPE or include in the instructions and information the internet address at which the EU declaration of conformity can be accessed; further to a reasoned request from a competent national authority, provide it with all the information and documentation, in paper or electronic form, necessary to demonstrate the conformity of the PPE with this Regulation.

CE marking : the CE marking shall be affixed before the PPE is placed on the market . The CE marking and, where applicable, the identification number of the notified body may be followed by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall take appropriate action in the event of improper use of that marking.

Accreditation system : in the recitals, it is stipulated that the system set out in this Regulation should be complemented by the accreditation system provided for in Regulation (EC) No 765/2008 .

Transparent accreditation ensuring the necessary level of confidence in certificates of conformity , should be considered by the national public authorities throughout the Union as the preferred means of demonstrating the technical competence of conformity assessment bodies.

However, national authorities may consider that they possess the appropriate means of carrying out that evaluation themselves. In such cases, in order to ensure the appropriate level of credibility of evaluations carried out by other national authorities, they should provide the Commission and the other Member States with the necessary documentary evidence demonstrating the compliance of the conformity assessment bodies evaluated with the relevant regulatory requirements

Appeal against decisions of notified bodies : notified bodies shall ensure that a transparent and accessible appeal procedure against their decisions is available.

Market surveillance : in line with the New Legislative Framework (NLF) on regulation of goods and in order to ensure legal certainty, Parliament proposed to clarify that rules on Union market surveillance and control of products entering the Union market provided for in Regulation (EC) No 765/2008 apply to PPE covered by this Regulation. Members also introduced provisions relating to the procedure at national level for dealing with PPE presenting a risk, Union safeguard procedure as well as PPE presenting a risk for the health and safety of persons.

Documents
2016/01/19
   EP - Debate in Parliament
2015/11/10
   EP - Approval in committee of the text agreed at 1st reading interinstitutional negotiations
Documents
2015/10/12
   CSL - Coreper letter confirming interinstitutional agreement
2015/04/30
   EP - Committee report tabled for plenary, 1st reading
Details

The Committee on the Internal Market and Consumer Protection adopted the report by Vicky FORD (ECR, UK) on the proposal for a regulation of the European Parliament and of the Council on personal protective equipment.

The committee recommended that Parliament’s position adopted at first reading following the ordinary legislative procedure should amend the Commission proposal as follows:

Purpose and scope : the Regulation lays down requirements for the design and manufacture of personal protective equipment (PPE) which is being made available on the market in order to ensure the protection of users and rules on its free movement in the Union.

Amendments aiming to include in the scope of the Regulation equipment to protect against oxygen deficiency (e.g. diving equipment), chemicals, biological agents and radiation/radioactive contamination, laser radiation and radioactive contamination, and explosive fragments are now inserted into Annex I, Category III.

Excluded from the scope of the legislation are PPE:

designed to be used for self-defence, with the exception of PPE intended for sporting activities; intended for private use to protect against: (i) damp and water not of an extreme nature; (ii) heat, for which the economic operator does not explicitly describe and market the products as having a protective function; in the form of clothing intended for private use, with reflective or fluorescent garments which are exclusively included for reasons of design or decoration, and for which the economic operator does not describe and market the products as having a protective function; designed and placed on the market as artisanal products which are decorative in nature.

Definitions: Members wanted to see more specific technical provisions, regarding:

connection systems as items essential to the PPE's function; adding a definition of 'demonstration' and 'field test' and permitting field testing to take place. Field tests should not be designed to test the protection performance of the PPE but to evaluate other non-protective aspects such as comfort, ergonomics and design.

Obligations of economic operators (manufacturers, importers, distributors):

Manufacturers should:

keep the technical documentation and the EU declaration of conformity for at least five years after the PPE has been placed on the market (rather than 10 years as proposed by the Commission); ensure that instructions , as well as any labelling, are clear, understandable and intelligible; ensure that performance as recorded during relevant technical tests to check the levels of classes of protection provided by the PPE is available electronically or upon request.

Manufacturers should include with the EPP either the simplified EU declaration of conformity or include in the instructions or information leaflet the web site address where the EU declaration of conformity might be seen.

Importers should:

indicate, on the PPE their contact details in the official language or languages of the Member State(s) in which the PPE is to be marketed; ensure that PPE is accompanied by the instructions and safety information in a language which can be easily understood by consumers; with regard to the risks presented by PPE, carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring.

Members stressed that importers and distributors should immediately inform the manufacturer and the competent national authorities if they have reason to believe that PPE that they have placed on the market is not in conformity with the Regulation.

Examination certificate : the PPE should be examined on the basis of the latest scientific evidence. The maximum period of validity of the EU type-examination certificate should be five years and a process for reviewing the certificate should be provided. Following a positive review, a renewed certificate may continue to be valid for further periods, each of which should be for a maximum of five years.

Presumption of conformity: unless otherwise provided for by Union harmonisation legislation, the withdrawal of a harmonised standard shall not invalidate existing certificates issued by notified bodies. Products produced in accordance with the existing certificate shall still benefit from continuing conformity with the essential requirements and may continue to be placed on the market until the end of the validity of the relevant certificates issued by notified bodies.

CE marking : the CE marking and, where applicable, the identification number of the notified body may be accompanied by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall take appropriate action in the event of improper use of that marking.

Notification of conformity assessment bodies : accreditation should be the general rule for notified bodies. Members also stipulated that:

Member States must notify manufacturers if a notified body has ceased activity; any appeal procedure must be transparent and accessible.

Market surveillance : noting that the existing PPE legislation is in need of updating in line with the New Legislative Framework (NLF) on regulation of goods, Members introduced a new Chapter that will take into account: the requirements of the market surveillance regulation when the latter has been finalised; Union market surveillance and control of products entering the Union market; procedure applicable to PPE presenting a risk at national level, safeguard measures, etc.

Requirements for employers : Members clarified the requirements for employers who provide PPE to their employees. Accordingly, employers shall provide PPE that complies with the relevant Union provisions on design and manufacture with respect to safety and health.

Documents
2015/04/23
   EP - Vote in committee, 1st reading
2015/04/23
   EP - Committee decision to open interinstitutional negotiations with report adopted in committee
2015/04/07
   EP - Committee opinion
Documents
2015/03/03
   EP - Amendments tabled in committee
Documents
2015/01/28
   EP - Committee draft report
Documents
2014/12/04
   CSL - Debate in Council
Documents
2014/12/04
   CSL - Council Meeting
2014/10/20
   EP - Committee referral announced in Parliament, 1st reading
2014/09/30
   EP - AGEA Laura (EFDD) appointed as rapporteur in EMPL
2014/07/17
   EP - FORD Vicky (ECR) appointed as rapporteur in IMCO
2014/07/09
   ESC - Economic and Social Committee: opinion, report
Documents
2014/05/19
   ES_PARLIAMENT - Contribution
Documents
2014/04/02
   EP - Committee referral announced in Parliament, 1st reading
2014/03/27
   EC - Document attached to the procedure
2014/03/27
   EC - Document attached to the procedure
2014/03/27
   EC - Legislative proposal published
Details

PURPOSE: to lay down requirements for the design and manufacture of personal protective equipment (PPE) in order to ensure the health and safety protection of users and rules on its free movement in the Union.

PROPOSED ACT: Regulation of the European Parliament and the Council.

ROLE OF THE EUROPEAN PARLIAMENT: the European Parliament decides in accordance with the ordinary legislative procedure and on an equal footing with the Council.

BACKGROUND: Directive 89/686/EEC on personal protective equipment was adopted on 21 December 1989 and became fully applicable as from 1 July 1995. It sets out basic requirements that PPE must comply with in order to be made available on the EU market.

The PPE Directive applies to PPE that is defined as “any device or appliance designed to be worn or held by an individual for protection against one or more health and safety hazards”.

While the directive has successfully achieved its objectives in creating a single market and ensuring a high level of protection for users of PPE, certain problems have been encountered in its implementation. These concern products on the market that do not ensure an adequate level of protection, diverging approaches of the notified bodies, the effectiveness of the market surveillance as well as risks related to protective equipment which is currently not covered by the PPE Directive.

The proposal modifies and clarifies a number of the provisions of the existing Directive and aligns it with the provisions of Decision No 768/2008/EC establishing a common framework for the marketing of products (NLF Decision). The Commission has already proposed the alignment of nine Directives to the NLF Decision within an NLF implementation package adopted on 21 November 2011.

IMPACT ASSESSMENT: the preferred option consists of amending the PPE Directive as it: (i) lead to an improved level of protection of the health and safety of the users; (ii) ensures a more effective work of the market surveillance authorities and consequently reduces the non-compliant products; (iii) does not entail significant costs for economic operators and notified bodies.

CONTENT: this proposal intends to replace Directive 89/686/EEC on personal protective equipment by a Regulation. Its general objectives are to ensure a high level of protection of human health and safety whilst guaranteeing fair competition for economic operators on the Union market and simplifying the regulatory environment in this area.

The proposal also clarifies a number of provisions of the existing Directive and aligns it with those of the Decision No 768/2008/EC establishing a common framework for the marketing of products (decision on the new legislative framework).

Scope : the Commission proposes to enlarge the scope of the current PPE Directive by deleting the exclusions of PPE designed and manufactured for private use against heat, damp and water . The proposal keeps the other existing exclusions and clarifies that it does not apply to PPE for head, face or eye protection, subject to the relevant UNECE Regulation, of users of two- or three-wheeled motor vehicles.

Two PPE specific definitions have been added in order to clarify the applicable conformity assessment procedures: “ Individually adapted PPE ” and “ Made-to-measure PPE ”.

Making available on the market, free movement, obligations of economic operators, CE marking : the proposal:

contains the typical provisions for product-related Union harmonisation legislation and sets out the obligations of the relevant economic operators (manufacturers, authorised representatives, importers and distributors), in accordance with the NLF Decision; obliges the manufacturer of PPE to draw up a technical documentation and to ensure that the PPE is accompanied by a copy of the EU declaration of conformity or a simplified EU declaration of conformity.

Notified bodies : the proposal sets out requirements for national authorities responsible for conformity assessment bodies (notified bodies). It leaves the ultimate responsibility for designating and monitoring notified bodies with the individual Member State.

Categories and Conformity assessment : the proposal simplifies the definition of the categories of PPE. The category only depends on the risk against which the PPE is intended to protect. Provisions are set out for made-to-measure PPE. PPE intended to protect the user against drowning, cuts by hand-held chain-saws, high-pressure cutting, bullet wounds or knife stabs, and harmful noise are subject to the most stringent conformity assessment procedure .

Minor amendments have been made which change marginally three essential health and safety requirements (EHSR) in order to remove requirements shown to be impracticable or that create confusion.

Application : the proposed Regulation will become applicable two years after its entry into force to allow manufacturers, notified bodies and Member States time to adapt to the new requirements. However, the designation of notified bodies pursuant to the new requirements and process needs to start shortly after the entry into force of this Regulation.

Transitional provisions are foreseen for products manufactured and the certificates issued by notified bodies under Directive 89/686/EEC so as to allow stocks to be absorbed and ensure a smooth transition to the new requirements.

DELEGATED ACTS: this proposal contains provisions empowering the Commission to adopt delegated acts in accordance with Article 290 of the Treaty on the Functioning of the European Union.

Documents

  • Final act published in Official Journal: Regulation 2016/425
  • Final act published in Official Journal: OJ L 081 31.03.2016, p. 0051
  • Commission response to text adopted in plenary: SP(2016)191
  • Draft final act: 00058/2015/LEX
  • Results of vote in Parliament: Results of vote in Parliament
  • Decision by Parliament, 1st reading: T8-0012/2016
  • Approval in committee of the text agreed at 1st reading interinstitutional negotiations: PE610.792
  • Coreper letter confirming interinstitutional agreement: GEDA/A/(2015)010800
  • Committee report tabled for plenary, 1st reading: A8-0148/2015
  • Committee opinion: PE544.202
  • Amendments tabled in committee: PE549.462
  • Committee draft report: PE546.721
  • Debate in Council: 3353
  • Economic and Social Committee: opinion, report: CES2799/2014
  • Contribution: COM(2014)0186
  • Document attached to the procedure: EUR-Lex
  • Document attached to the procedure: SWD(2014)0118
  • Document attached to the procedure: EUR-Lex
  • Document attached to the procedure: SWD(2014)0119
  • Legislative proposal published: EUR-Lex
  • Legislative proposal published: COM(2014)0186
  • Document attached to the procedure: EUR-Lex SWD(2014)0118
  • Document attached to the procedure: EUR-Lex SWD(2014)0119
  • Economic and Social Committee: opinion, report: CES2799/2014
  • Committee draft report: PE546.721
  • Amendments tabled in committee: PE549.462
  • Committee opinion: PE544.202
  • Coreper letter confirming interinstitutional agreement: GEDA/A/(2015)010800
  • Draft final act: 00058/2015/LEX
  • Commission response to text adopted in plenary: SP(2016)191
  • Contribution: COM(2014)0186

Activities

Votes

A8-0148/2015 - Vicky Ford - Résolution législative #

2016/01/20 Outcome: +: 606, -: 53, 0: 50
DE IT PL ES RO FR GB HU BE PT BG CZ SE EL NL SK AT DK FI HR LT LV SI LU IE EE MT CY
Total
87
70
45
50
32
72
71
21
20
19
16
20
19
21
25
13
16
13
12
10
8
8
7
6
9
6
6
6
icon: PPE PPE
209

Denmark PPE

For (1)

1

Finland PPE

2
2

Luxembourg PPE

3

Estonia PPE

For (1)

1
icon: S&D S&D
180
3

Netherlands S&D

3

Croatia S&D

2

Latvia S&D

1

Slovenia S&D

For (1)

1

Luxembourg S&D

For (1)

1

Ireland S&D

For (1)

1

Estonia S&D

For (1)

1

Malta S&D

3

Cyprus S&D

2
icon: ECR ECR
70

Italy ECR

2

Romania ECR

For (1)

1

Bulgaria ECR

2

Czechia ECR

2

Greece ECR

For (1)

1

Netherlands ECR

2
2

Croatia ECR

For (1)

1

Lithuania ECR

1

Latvia ECR

For (1)

1
icon: ALDE ALDE
63

Romania ALDE

3

United Kingdom ALDE

1

Denmark ALDE

3

Croatia ALDE

2
2

Latvia ALDE

1

Luxembourg ALDE

For (1)

1

Ireland ALDE

For (1)

1

Estonia ALDE

3
icon: Verts/ALE Verts/ALE
46

Hungary Verts/ALE

2

Belgium Verts/ALE

2

Sweden Verts/ALE

3

Netherlands Verts/ALE

2

Austria Verts/ALE

3

Denmark Verts/ALE

For (1)

1

Finland Verts/ALE

For (1)

1

Lithuania Verts/ALE

For (1)

1

Latvia Verts/ALE

1

Slovenia Verts/ALE

For (1)

1

Luxembourg Verts/ALE

For (1)

1

Estonia Verts/ALE

For (1)

1
icon: GUE/NGL GUE/NGL
46

Italy GUE/NGL

3

United Kingdom GUE/NGL

Abstain (1)

1
3

Czechia GUE/NGL

2

Sweden GUE/NGL

Abstain (1)

1

Netherlands GUE/NGL

3

Denmark GUE/NGL

Abstain (1)

1

Finland GUE/NGL

Abstain (1)

1

Ireland GUE/NGL

3

Cyprus GUE/NGL

2
icon: NI NI
15

Germany NI

2

Poland NI

1

France NI

3

United Kingdom NI

For (1)

1

Hungary NI

Abstain (1)

3
icon: EFDD EFDD
44

Poland EFDD

1

France EFDD

1

Czechia EFDD

Against (1)

1

Sweden EFDD

2
icon: ENF ENF
35

Poland ENF

For (1)

1

Romania ENF

Against (1)

1

United Kingdom ENF

Against (1)

1

Belgium ENF

Abstain (1)

1

Netherlands ENF

4

Austria ENF

3
AmendmentsDossier
209 2014/0108(COD)
2015/03/03 IMCO 92 amendments...
source: 549.462
2015/03/04 EMPL 117 amendments...
source: 549.449

History

(these mark the time of scraping, not the official date of the change)

committees/0/shadows/3
name
MAŠTÁLKA Jiří
group
European United Left - Nordic Green Left
abbr
GUE/NGL
docs/2/docs/0/url
Old
https://dm.eesc.europa.eu/EESCDocumentSearch/Pages/redresults.aspx?k=(documenttype:AC)(documentnumber:2799)(documentyear:2014)(documentlanguage:EN)
New
https://dmsearch.eesc.europa.eu/search/public?k=(documenttype:AC)(documentnumber:2799)(documentyear:2014)(documentlanguage:EN)
docs/3/docs/0/url
Old
http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE546.721
New
https://www.europarl.europa.eu/doceo/document/IMCO-PR-546721_EN.html
docs/4/docs/0/url
Old
http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE549.462
New
https://www.europarl.europa.eu/doceo/document/IMCO-AM-549462_EN.html
docs/5/docs/0/url
Old
http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE544.202&secondRef=03
New
https://www.europarl.europa.eu/doceo/document/EMPL-AD-544202_EN.html
events/1/type
Old
Committee referral announced in Parliament, 1st reading/single reading
New
Committee referral announced in Parliament, 1st reading
events/2/type
Old
Committee referral announced in Parliament, 1st reading/single reading
New
Committee referral announced in Parliament, 1st reading
events/4/type
Old
Vote in committee, 1st reading/single reading
New
Vote in committee, 1st reading
events/6
date
2015-04-30T00:00:00
type
Committee report tabled for plenary, 1st reading
body
EP
docs
url: https://www.europarl.europa.eu/doceo/document/A-8-2015-0148_EN.html title: A8-0148/2015
summary
events/6
date
2015-04-30T00:00:00
type
Committee report tabled for plenary, 1st reading/single reading
body
EP
docs
url: http://www.europarl.europa.eu/doceo/document/A-8-2015-0148_EN.html title: A8-0148/2015
summary
events/8/docs
  • url: http://www.europarl.europa.eu/sides/getDoc.do?secondRef=TOC&language=EN&reference=20160119&type=CRE title: Debate in Parliament
events/10
date
2016-01-20T00:00:00
type
Decision by Parliament, 1st reading
body
EP
docs
url: https://www.europarl.europa.eu/doceo/document/TA-8-2016-0012_EN.html title: T8-0012/2016
summary
events/10
date
2016-01-20T00:00:00
type
Decision by Parliament, 1st reading/single reading
body
EP
docs
url: http://www.europarl.europa.eu/doceo/document/TA-8-2016-0012_EN.html title: T8-0012/2016
summary
procedure/Modified legal basis
Rules of Procedure EP 159
procedure/Other legal basis
Rules of Procedure EP 159
procedure/instrument/1
Amended by 2017/0353(COD)
procedure/instrument/1
Repealing Directive 89/686/EEC Amended by 2017/0353(COD)
committees/0
type
Responsible Committee
body
EP
associated
False
committee_full
Internal Market and Consumer Protection
committee
IMCO
rapporteur
name: FORD Vicky date: 2014-07-17T00:00:00 group: European Conservatives and Reformists abbr: ECR
shadows
committees/0
type
Responsible Committee
body
EP
associated
False
committee_full
Internal Market and Consumer Protection
committee
IMCO
date
2014-07-17T00:00:00
rapporteur
name: FORD Vicky group: European Conservatives and Reformists abbr: ECR
shadows
committees/1/date
    committees/2
    type
    Committee Opinion
    body
    EP
    associated
    False
    committee_full
    Employment and Social Affairs
    committee
    EMPL
    rapporteur
    name: AGEA Laura date: 2014-09-30T00:00:00 group: Europe of Freedom and Direct Democracy abbr: EFDD
    committees/2
    type
    Committee Opinion
    body
    EP
    associated
    False
    committee_full
    Employment and Social Affairs
    committee
    EMPL
    date
    2014-09-30T00:00:00
    rapporteur
    name: AGEA Laura group: Europe of Freedom and Direct Democracy abbr: EFDD
    committees/5/date
      committees/6/date
        committees/7/date
          docs/8/body
          EC
          events/6/docs/0/url
          Old
          http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A8-2015-0148&language=EN
          New
          http://www.europarl.europa.eu/doceo/document/A-8-2015-0148_EN.html
          events/10/docs/0/url
          Old
          http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P8-TA-2016-0012
          New
          http://www.europarl.europa.eu/doceo/document/TA-8-2016-0012_EN.html
          activities
          • date: 2014-03-27T00:00:00 docs: url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2014&nu_doc=0186 title: COM(2014)0186 type: Legislative proposal published celexid: CELEX:52014PC0186:EN body: EC commission: DG: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry Commissioner: TAJANI Antonio type: Legislative proposal published
          • date: 2014-04-02T00:00:00 body: EP type: Committee referral announced in Parliament, 1st reading/single reading committees: body: EP responsible: False committee_full: Employment and Social Affairs committee: EMPL body: EP responsible: False committee: EMPL date: 2014-09-30T00:00:00 committee_full: Employment and Social Affairs rapporteur: group: EFD name: AGEA Laura body: EP responsible: False committee_full: Environment, Public Health and Food Safety committee: ENVI body: EP responsible: True committee_full: Internal Market and Consumer Protection committee: IMCO body: EP responsible: True committee: IMCO date: 2014-07-17T00:00:00 committee_full: Internal Market and Consumer Protection rapporteur: group: ECR name: FORD Vicky body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE
          • date: 2014-10-20T00:00:00 body: EP type: Committee referral announced in Parliament, 1st reading/single reading committees: body: EP responsible: False committee_full: Employment and Social Affairs committee: EMPL body: EP responsible: False committee: EMPL date: 2014-09-30T00:00:00 committee_full: Employment and Social Affairs rapporteur: group: EFD name: AGEA Laura body: EP responsible: False committee_full: Environment, Public Health and Food Safety committee: ENVI body: EP responsible: True committee_full: Internal Market and Consumer Protection committee: IMCO body: EP responsible: True committee: IMCO date: 2014-07-17T00:00:00 committee_full: Internal Market and Consumer Protection rapporteur: group: ECR name: FORD Vicky body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE
          • body: CSL meeting_id: 3353 docs: url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=SMPL&ROWSPP=25&RESULTSET=1&NRROWS=500&DOC_LANCD=EN&ORDERBY=DOC_DATE+DESC&CONTENTS=3353*&MEET_DATE=04/12/2014 type: Debate in Council title: 3353 council: Competitiveness (Internal Market, Industry, Research and Space) date: 2014-12-04T00:00:00 type: Council Meeting
          • date: 2015-04-23T00:00:00 body: unknown type: Committee decision to open interinstitutional negotiations with report adopted in committee
          • date: 2015-04-23T00:00:00 body: EP type: Vote in committee, 1st reading/single reading committees: body: EP responsible: False committee_full: Employment and Social Affairs committee: EMPL body: EP responsible: False committee: EMPL date: 2014-09-30T00:00:00 committee_full: Employment and Social Affairs rapporteur: group: EFD name: AGEA Laura body: EP responsible: False committee_full: Environment, Public Health and Food Safety committee: ENVI body: EP responsible: True committee_full: Internal Market and Consumer Protection committee: IMCO body: EP responsible: True committee: IMCO date: 2014-07-17T00:00:00 committee_full: Internal Market and Consumer Protection rapporteur: group: ECR name: FORD Vicky body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE
          • body: EP docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A8-2015-0148&language=EN type: Committee report tabled for plenary, 1st reading/single reading title: A8-0148/2015 type: Committee report tabled for plenary, 1st reading/single reading committees: body: EP responsible: False committee_full: Employment and Social Affairs committee: EMPL body: EP responsible: False committee: EMPL date: 2014-09-30T00:00:00 committee_full: Employment and Social Affairs rapporteur: group: EFD name: AGEA Laura body: EP responsible: False committee_full: Environment, Public Health and Food Safety committee: ENVI body: EP responsible: True committee_full: Internal Market and Consumer Protection committee: IMCO body: EP responsible: True committee: IMCO date: 2014-07-17T00:00:00 committee_full: Internal Market and Consumer Protection rapporteur: group: ECR name: FORD Vicky body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE date: 2015-04-30T00:00:00
          • date: 2016-01-19T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?secondRef=TOC&language=EN&reference=20160119&type=CRE type: Debate in Parliament title: Debate in Parliament body: EP type: Debate in Parliament
          • date: 2016-01-20T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P8-TA-2016-0012 type: Decision by Parliament, 1st reading/single reading title: T8-0012/2016 body: EP type: Decision by Parliament, 1st reading/single reading
          • date: 2016-02-12T00:00:00 body: CSL type: Council Meeting council: Economic and Financial Affairs ECOFIN meeting_id: 3445
          • date: 2016-02-12T00:00:00 body: EP/CSL type: Act adopted by Council after Parliament's 1st reading
          • date: 2016-03-09T00:00:00 body: CSL type: Final act signed
          • date: 2016-03-31T00:00:00 docs: url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32016R0425 title: Regulation 2016/425 url: http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=OJ:L:2016:081:TOC title: OJ L 081 31.03.2016, p. 0051 type: Final act published in Official Journal
          commission
          • body: EC dg: Internal Market, Industry, Entrepreneurship and SMEs commissioner: TAJANI Antonio
          committees/0
          type
          Responsible Committee
          body
          EP
          associated
          False
          committee_full
          Internal Market and Consumer Protection
          committee
          IMCO
          date
          2014-07-17T00:00:00
          rapporteur
          name: FORD Vicky group: European Conservatives and Reformists abbr: ECR
          shadows
          committees/0
          body
          EP
          responsible
          False
          committee_full
          Employment and Social Affairs
          committee
          EMPL
          committees/1
          type
          Former Responsible Committee
          body
          EP
          associated
          False
          committee_full
          Internal Market and Consumer Protection
          committee
          IMCO
          date
          committees/1
          body
          EP
          responsible
          False
          committee
          EMPL
          date
          2014-09-30T00:00:00
          committee_full
          Employment and Social Affairs
          rapporteur
          group: EFD name: AGEA Laura
          committees/2
          type
          Committee Opinion
          body
          EP
          associated
          False
          committee_full
          Employment and Social Affairs
          committee
          EMPL
          date
          2014-09-30T00:00:00
          rapporteur
          name: AGEA Laura group: Europe of Freedom and Direct Democracy abbr: EFDD
          committees/2
          body
          EP
          responsible
          False
          committee_full
          Environment, Public Health and Food Safety
          committee
          ENVI
          committees/3
          type
          Committee Opinion
          body
          EP
          associated
          False
          committee_full
          Environment, Public Health and Food Safety
          committee
          ENVI
          opinion
          False
          committees/3
          body
          EP
          responsible
          True
          committee_full
          Internal Market and Consumer Protection
          committee
          IMCO
          committees/4
          type
          Committee Opinion
          body
          EP
          associated
          False
          committee_full
          Industry, Research and Energy
          committee
          ITRE
          opinion
          False
          committees/4
          body
          EP
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          committees/5
          type
          Former Committee Opinion
          body
          EP
          associated
          False
          committee_full
          Employment and Social Affairs
          committee
          EMPL
          date
          committees/5
          body
          EP
          responsible
          False
          committee_full
          Industry, Research and Energy
          committee
          ITRE
          committees/6
          type
          Former Committee Opinion
          body
          EP
          associated
          False
          committee_full
          Environment, Public Health and Food Safety
          committee
          ENVI
          date
          committees/7
          type
          Former Committee Opinion
          body
          EP
          associated
          False
          committee_full
          Industry, Research and Energy
          committee
          ITRE
          date
          council
          • body: CSL type: Council Meeting council: Economic and Financial Affairs ECOFIN meeting_id: 3445 url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=SMPL&ROWSPP=25&RESULTSET=1&NRROWS=500&DOC_LANCD=EN&ORDERBY=DOC_DATE+DESC&CONTENTS=3445*&MEET_DATE=12/02/2016 date: 2016-02-12T00:00:00
          • body: CSL type: Council Meeting council: Competitiveness (Internal Market, Industry, Research and Space) meeting_id: 3353 url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=SMPL&ROWSPP=25&RESULTSET=1&NRROWS=500&DOC_LANCD=EN&ORDERBY=DOC_DATE+DESC&CONTENTS=3353*&MEET_DATE=04/12/2014 date: 2014-12-04T00:00:00
          docs
          • date: 2014-03-27T00:00:00 docs: url: https://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=SWD:2014:0118:FIN:EN:PDF title: EUR-Lex title: SWD(2014)0118 type: Document attached to the procedure body: EC
          • date: 2014-03-27T00:00:00 docs: url: https://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=SWD:2014:0119:FIN:EN:PDF title: EUR-Lex title: SWD(2014)0119 type: Document attached to the procedure body: EC
          • date: 2014-07-09T00:00:00 docs: url: https://dm.eesc.europa.eu/EESCDocumentSearch/Pages/redresults.aspx?k=(documenttype:AC)(documentnumber:2799)(documentyear:2014)(documentlanguage:EN) title: CES2799/2014 type: Economic and Social Committee: opinion, report body: ESC
          • date: 2015-01-28T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE546.721 title: PE546.721 type: Committee draft report body: EP
          • date: 2015-03-03T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE549.462 title: PE549.462 type: Amendments tabled in committee body: EP
          • date: 2015-04-07T00:00:00 docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=COMPARL&mode=XML&language=EN&reference=PE544.202&secondRef=03 title: PE544.202 committee: EMPL type: Committee opinion body: EP
          • date: 2015-10-12T00:00:00 docs: title: GEDA/A/(2015)010800 type: Coreper letter confirming interinstitutional agreement body: CSL
          • date: 2016-03-09T00:00:00 docs: url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=ADV&RESULTSET=1&DOC_ID=[%n4]%2F16&DOC_LANCD=EN&ROWSPP=25&NRROWS=500&ORDERBY=DOC_DATE+DESC title: 00058/2015/LEX type: Draft final act body: CSL
          • date: 2016-03-16T00:00:00 docs: url: /oeil/spdoc.do?i=25643&j=0&l=en title: SP(2016)191 type: Commission response to text adopted in plenary
          • date: 2014-05-19T00:00:00 docs: url: http://www.connefof.europarl.europa.eu/connefof/app/exp/COM(2014)0186 title: COM(2014)0186 type: Contribution body: ES_PARLIAMENT
          events
          • date: 2014-03-27T00:00:00 type: Legislative proposal published body: EC docs: url: https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2014&nu_doc=0186 title: EUR-Lex title: COM(2014)0186 summary: PURPOSE: to lay down requirements for the design and manufacture of personal protective equipment (PPE) in order to ensure the health and safety protection of users and rules on its free movement in the Union. PROPOSED ACT: Regulation of the European Parliament and the Council. ROLE OF THE EUROPEAN PARLIAMENT: the European Parliament decides in accordance with the ordinary legislative procedure and on an equal footing with the Council. BACKGROUND: Directive 89/686/EEC on personal protective equipment was adopted on 21 December 1989 and became fully applicable as from 1 July 1995. It sets out basic requirements that PPE must comply with in order to be made available on the EU market. The PPE Directive applies to PPE that is defined as “any device or appliance designed to be worn or held by an individual for protection against one or more health and safety hazards”. While the directive has successfully achieved its objectives in creating a single market and ensuring a high level of protection for users of PPE, certain problems have been encountered in its implementation. These concern products on the market that do not ensure an adequate level of protection, diverging approaches of the notified bodies, the effectiveness of the market surveillance as well as risks related to protective equipment which is currently not covered by the PPE Directive. The proposal modifies and clarifies a number of the provisions of the existing Directive and aligns it with the provisions of Decision No 768/2008/EC establishing a common framework for the marketing of products (NLF Decision). The Commission has already proposed the alignment of nine Directives to the NLF Decision within an NLF implementation package adopted on 21 November 2011. IMPACT ASSESSMENT: the preferred option consists of amending the PPE Directive as it: (i) lead to an improved level of protection of the health and safety of the users; (ii) ensures a more effective work of the market surveillance authorities and consequently reduces the non-compliant products; (iii) does not entail significant costs for economic operators and notified bodies. CONTENT: this proposal intends to replace Directive 89/686/EEC on personal protective equipment by a Regulation. Its general objectives are to ensure a high level of protection of human health and safety whilst guaranteeing fair competition for economic operators on the Union market and simplifying the regulatory environment in this area. The proposal also clarifies a number of provisions of the existing Directive and aligns it with those of the Decision No 768/2008/EC establishing a common framework for the marketing of products (decision on the new legislative framework). Scope : the Commission proposes to enlarge the scope of the current PPE Directive by deleting the exclusions of PPE designed and manufactured for private use against heat, damp and water . The proposal keeps the other existing exclusions and clarifies that it does not apply to PPE for head, face or eye protection, subject to the relevant UNECE Regulation, of users of two- or three-wheeled motor vehicles. Two PPE specific definitions have been added in order to clarify the applicable conformity assessment procedures: “ Individually adapted PPE ” and “ Made-to-measure PPE ”. Making available on the market, free movement, obligations of economic operators, CE marking : the proposal: contains the typical provisions for product-related Union harmonisation legislation and sets out the obligations of the relevant economic operators (manufacturers, authorised representatives, importers and distributors), in accordance with the NLF Decision; obliges the manufacturer of PPE to draw up a technical documentation and to ensure that the PPE is accompanied by a copy of the EU declaration of conformity or a simplified EU declaration of conformity. Notified bodies : the proposal sets out requirements for national authorities responsible for conformity assessment bodies (notified bodies). It leaves the ultimate responsibility for designating and monitoring notified bodies with the individual Member State. Categories and Conformity assessment : the proposal simplifies the definition of the categories of PPE. The category only depends on the risk against which the PPE is intended to protect. Provisions are set out for made-to-measure PPE. PPE intended to protect the user against drowning, cuts by hand-held chain-saws, high-pressure cutting, bullet wounds or knife stabs, and harmful noise are subject to the most stringent conformity assessment procedure . Minor amendments have been made which change marginally three essential health and safety requirements (EHSR) in order to remove requirements shown to be impracticable or that create confusion. Application : the proposed Regulation will become applicable two years after its entry into force to allow manufacturers, notified bodies and Member States time to adapt to the new requirements. However, the designation of notified bodies pursuant to the new requirements and process needs to start shortly after the entry into force of this Regulation. Transitional provisions are foreseen for products manufactured and the certificates issued by notified bodies under Directive 89/686/EEC so as to allow stocks to be absorbed and ensure a smooth transition to the new requirements. DELEGATED ACTS: this proposal contains provisions empowering the Commission to adopt delegated acts in accordance with Article 290 of the Treaty on the Functioning of the European Union.
          • date: 2014-04-02T00:00:00 type: Committee referral announced in Parliament, 1st reading/single reading body: EP
          • date: 2014-10-20T00:00:00 type: Committee referral announced in Parliament, 1st reading/single reading body: EP
          • date: 2014-12-04T00:00:00 type: Debate in Council body: CSL docs: url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=SMPL&ROWSPP=25&RESULTSET=1&NRROWS=500&DOC_LANCD=EN&ORDERBY=DOC_DATE+DESC&CONTENTS=3353*&MEET_DATE=04/12/2014 title: 3353
          • date: 2015-04-23T00:00:00 type: Vote in committee, 1st reading/single reading body: EP
          • date: 2015-04-23T00:00:00 type: Committee decision to open interinstitutional negotiations with report adopted in committee body: EP
          • date: 2015-04-30T00:00:00 type: Committee report tabled for plenary, 1st reading/single reading body: EP docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A8-2015-0148&language=EN title: A8-0148/2015 summary: The Committee on the Internal Market and Consumer Protection adopted the report by Vicky FORD (ECR, UK) on the proposal for a regulation of the European Parliament and of the Council on personal protective equipment. The committee recommended that Parliament’s position adopted at first reading following the ordinary legislative procedure should amend the Commission proposal as follows: Purpose and scope : the Regulation lays down requirements for the design and manufacture of personal protective equipment (PPE) which is being made available on the market in order to ensure the protection of users and rules on its free movement in the Union. Amendments aiming to include in the scope of the Regulation equipment to protect against oxygen deficiency (e.g. diving equipment), chemicals, biological agents and radiation/radioactive contamination, laser radiation and radioactive contamination, and explosive fragments are now inserted into Annex I, Category III. Excluded from the scope of the legislation are PPE: designed to be used for self-defence, with the exception of PPE intended for sporting activities; intended for private use to protect against: (i) damp and water not of an extreme nature; (ii) heat, for which the economic operator does not explicitly describe and market the products as having a protective function; in the form of clothing intended for private use, with reflective or fluorescent garments which are exclusively included for reasons of design or decoration, and for which the economic operator does not describe and market the products as having a protective function; designed and placed on the market as artisanal products which are decorative in nature. Definitions: Members wanted to see more specific technical provisions, regarding: connection systems as items essential to the PPE's function; adding a definition of 'demonstration' and 'field test' and permitting field testing to take place. Field tests should not be designed to test the protection performance of the PPE but to evaluate other non-protective aspects such as comfort, ergonomics and design. Obligations of economic operators (manufacturers, importers, distributors): Manufacturers should: keep the technical documentation and the EU declaration of conformity for at least five years after the PPE has been placed on the market (rather than 10 years as proposed by the Commission); ensure that instructions , as well as any labelling, are clear, understandable and intelligible; ensure that performance as recorded during relevant technical tests to check the levels of classes of protection provided by the PPE is available electronically or upon request. Manufacturers should include with the EPP either the simplified EU declaration of conformity or include in the instructions or information leaflet the web site address where the EU declaration of conformity might be seen. Importers should: indicate, on the PPE their contact details in the official language or languages of the Member State(s) in which the PPE is to be marketed; ensure that PPE is accompanied by the instructions and safety information in a language which can be easily understood by consumers; with regard to the risks presented by PPE, carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring. Members stressed that importers and distributors should immediately inform the manufacturer and the competent national authorities if they have reason to believe that PPE that they have placed on the market is not in conformity with the Regulation. Examination certificate : the PPE should be examined on the basis of the latest scientific evidence. The maximum period of validity of the EU type-examination certificate should be five years and a process for reviewing the certificate should be provided. Following a positive review, a renewed certificate may continue to be valid for further periods, each of which should be for a maximum of five years. Presumption of conformity: unless otherwise provided for by Union harmonisation legislation, the withdrawal of a harmonised standard shall not invalidate existing certificates issued by notified bodies. Products produced in accordance with the existing certificate shall still benefit from continuing conformity with the essential requirements and may continue to be placed on the market until the end of the validity of the relevant certificates issued by notified bodies. CE marking : the CE marking and, where applicable, the identification number of the notified body may be accompanied by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall take appropriate action in the event of improper use of that marking. Notification of conformity assessment bodies : accreditation should be the general rule for notified bodies. Members also stipulated that: Member States must notify manufacturers if a notified body has ceased activity; any appeal procedure must be transparent and accessible. Market surveillance : noting that the existing PPE legislation is in need of updating in line with the New Legislative Framework (NLF) on regulation of goods, Members introduced a new Chapter that will take into account: the requirements of the market surveillance regulation when the latter has been finalised; Union market surveillance and control of products entering the Union market; procedure applicable to PPE presenting a risk at national level, safeguard measures, etc. Requirements for employers : Members clarified the requirements for employers who provide PPE to their employees. Accordingly, employers shall provide PPE that complies with the relevant Union provisions on design and manufacture with respect to safety and health.
          • date: 2015-11-10T00:00:00 type: Approval in committee of the text agreed at 1st reading interinstitutional negotiations body: EP docs: url: http://www.europarl.europa.eu/RegData/commissions/imco/inag/2017/09-22/IMCO_AG(2017)610792_EN.pdf title: PE610.792
          • date: 2016-01-19T00:00:00 type: Debate in Parliament body: EP docs: url: http://www.europarl.europa.eu/sides/getDoc.do?secondRef=TOC&language=EN&reference=20160119&type=CRE title: Debate in Parliament
          • date: 2016-01-20T00:00:00 type: Results of vote in Parliament body: EP docs: url: https://oeil.secure.europarl.europa.eu/oeil/popups/sda.do?id=25643&l=en title: Results of vote in Parliament
          • date: 2016-01-20T00:00:00 type: Decision by Parliament, 1st reading/single reading body: EP docs: url: http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P8-TA-2016-0012 title: T8-0012/2016 summary: The European Parliament adopted by 577 votes to 48, with 86 abstentions, a legislative resolution on the proposal for a regulation of the European Parliament and of the Council on personal protective equipment. Parliament’s position, adopted at first reading following the ordinary legislative procedure, amended the Commission proposal as follows: Purpose and scope : the Regulation lays down requirements for the design and manufacture of personal protective equipment (PPE) which is to be made available on the market, in order to ensure protection of the health and safety of users . Amendments aiming to include in the scope of the Regulation equipment to protect against cleaning materials of weak action or prolonged contact with water. Other substances and mixtures which are hazardous to health include atmospheres with oxygen deficiency and harmful biological agents which are now inserted into Annex I, Category III which includes exclusively the risks that may cause very serious consequences such as death or irreversible damage to health. Excluded from the scope of the legislation are PPE: designed to be used for self-defence, with the exception of PPE intended for sporting activities; designed for private use to protect against atmospheric conditions that are not of an extreme nature and damp and water during dishwashing; for exclusive use on seagoing vessels or aircraft that are subject to the relevant international treaties applicable in Member States; for head, face or eye protection of users, that is covered by Regulation No 22 of the United Nations Economic Commission for Europe on uniform provisions concerning the approval of protective helmets and their visors for drivers and passengers of motor cycles and mopeds. Definitions : PPE should also mean: equipment designed and manufactured to be worn or held by a person for protection against one or more risks to that person's health or safety; connexion systems for equipment that are not held or worn by a person, that are designed to connect that equipment to an external device or to a reliable anchorage point, that are not designed to be permanently fixed and that do not require fastening works before use. Obligations of economic operators (manufacturers, importers, distributors) : Manufacturers and importers shall, when deemed appropriate with regard to the risks presented by PPE, carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring. Manufacturers shall: ensure that the PPE is accompanied by the instructions and information, as well as any labelling, shall be clear, understandable, intelligible and legible; either provide the EU declaration of conformity with the PPE or include in the instructions and information the internet address at which the EU declaration of conformity can be accessed; further to a reasoned request from a competent national authority, provide it with all the information and documentation, in paper or electronic form, necessary to demonstrate the conformity of the PPE with this Regulation. CE marking : the CE marking shall be affixed before the PPE is placed on the market . The CE marking and, where applicable, the identification number of the notified body may be followed by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall take appropriate action in the event of improper use of that marking. Accreditation system : in the recitals, it is stipulated that the system set out in this Regulation should be complemented by the accreditation system provided for in Regulation (EC) No 765/2008 . Transparent accreditation ensuring the necessary level of confidence in certificates of conformity , should be considered by the national public authorities throughout the Union as the preferred means of demonstrating the technical competence of conformity assessment bodies. However, national authorities may consider that they possess the appropriate means of carrying out that evaluation themselves. In such cases, in order to ensure the appropriate level of credibility of evaluations carried out by other national authorities, they should provide the Commission and the other Member States with the necessary documentary evidence demonstrating the compliance of the conformity assessment bodies evaluated with the relevant regulatory requirements Appeal against decisions of notified bodies : notified bodies shall ensure that a transparent and accessible appeal procedure against their decisions is available. Market surveillance : in line with the New Legislative Framework (NLF) on regulation of goods and in order to ensure legal certainty, Parliament proposed to clarify that rules on Union market surveillance and control of products entering the Union market provided for in Regulation (EC) No 765/2008 apply to PPE covered by this Regulation. Members also introduced provisions relating to the procedure at national level for dealing with PPE presenting a risk, Union safeguard procedure as well as PPE presenting a risk for the health and safety of persons.
          • date: 2016-02-12T00:00:00 type: Act adopted by Council after Parliament's 1st reading body: EP/CSL
          • date: 2016-02-12T00:00:00 type: End of procedure in Parliament body: EP
          • date: 2016-03-09T00:00:00 type: Final act signed body: CSL
          • date: 2016-03-31T00:00:00 type: Final act published in Official Journal summary: PURPOSE: to update internal market rules for personal protective equipment, in order to enhance consumer safety and ensure fair competition between companies. LEGISLATIVE ACT: Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC. CONTENT: the new Regulation updates the existing rules in directive 89/686/EEC. It lays down requirements for the design and manufacture of personal protective equipment (PPE), which is to be made available on the market, in order to ensure protection of the health and safety of users and establish rules on the free movement of PPE in the Union. Scope: personal protective equipment offers protection against all kinds of hazards (e.g. heat, flames, chemicals, flying particles, mechanical shocks, etc.) in a range of different environments, whether it be the home, at work or on the sports field. Examples include: head/ear/eye protection, breathing protection, body protection, and hand/leg/foot protection. Products intended for private use to protect against atmospheric conditions that are not of an extreme nature or to protect against damp and water, including dishwashing gloves, fall outside of the scope of the Regulation. This Regulation covers PPE which is new to the Union market when it is placed on the market; that is to say, it is either new PPE made by a manufacturer established in the Union or PPE, whether new or second-hand, imported from a third country. It applies to all forms of supply, including distance selling. Obligations of economic operators (manufacturers, importers, distributors): all economic operators intervening in the supply and distribution chain must take appropriate measures to ensure that they make available on the market only PPE which is in conformity with the Regulation. In particular, manufacturers must ensure that PPE has been designed and manufactured in accordance with the applicable essential health and safety requirements set out in Annex II. They must: · implement the conformity assessment procedures established by the Regulation. These procedures are linked to the degree of risk involved; · keep the technical documentation and the EU declaration of conformity for 10 years after the PPE has been placed on the market; · carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring; · ensure that the PPE which they place on the market bears a type, batch or serial number or other element allowing its identification; · indicate, on the PPE, their name, registered trade name or registered trade mark and the postal address at which they can be contacted or, where that is not possible, on its packaging or in a document accompanying the PPE; · ensure that instructions and safety information , as well as any labelling, is clear, understandable, intelligible and legible; · further to a reasoned request from a competent national authority , provide it with all the information and documentation, in paper or electronic form, necessary to demonstrate the conformity of the PPE with the Regulation, in a language which can be easily understood by that authority; · immediately take the corrective measures necessary to bring PPE into conformity, to withdraw it or to recall it, as appropriate. For their part, importers must make sure that they do not place on the market PPE which does not comply with requirements or which present a risk. They must also make sure that the conformity assessment procedures have been carried out and that the CE marking and technical documentation drawn up by manufacturers are available for inspection by the competent national authorities. CE marking : the CE marking shall be affixed before the PPE is placed on the market and affixed visibly, legibly and indelibly to the PPE or affixed to the packaging and to the accompanying documents. The CE marking and, where applicable, the identification number of the notified body may be followed by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall take appropriate action in the event of improper use of that marking. Notifying authorities : the Regulation sets requirements for notifying authorities responsible for conformity assessment bodies. These bodies must apply the conformity assessment procedures without creating unnecessary burdens for economic operators . Interested parties have the right to appeal against the result of a conformity assessment carried out by a notified body. Market surveillance : in the context of aligning the legislation on PPE with the new legislative framework for the marketing of products, and in order to ensure legal certainty, the rules on Union market surveillance and control of products entering the Union market provided for in Regulation (EC) No 765/2008 apply to PPE covered by this Regulation. The new Regulation also contains provisions regarding procedures at national level for dealing with PPE presenting a risk, Union safeguard procedures, and compliant PPE which presents a risk to health and safety. Transitional provisions: Member States shall not impede the making available on the market of products covered by Directive 89/686/EEC which are in conformity with that Directive and which were placed on the market before 21 April 2019. ENTRY INTO FORCE: 20.4.2016. APPLICATION: from 21.4.2018, with the exception of certain provisions which apply from 21.10.2016 or from 21.3.2018. DELEGATED ACTS: the Commission may adopt delegated acts in respect of amending the categories of risks against which the PPE is intended to protect users. The power to adopt delegated acts shall be conferred on the Commission for a period of 5 years (which may be tacitly extended) from 21 April 2018. The European Parliament or the Council may raise objections to a delegated act within two months from the date of notification (which may be extended by two months). If the European Parliament or the Commission raise objections, the delegated act will not enter into force. docs: title: Regulation 2016/425 url: https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32016R0425 title: OJ L 081 31.03.2016, p. 0051 url: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=OJ:L:2016:081:TOC
          other
          • body: CSL type: Council Meeting council: Former Council configuration
          • body: EC dg: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry commissioner: TAJANI Antonio
          otherinst
          • name: European Economic and Social Committee
          procedure/Mandatory consultation of other institutions
          Economic and Social Committee
          procedure/Modified legal basis
          Old
          Rules of Procedure of the European Parliament EP 150
          New
          Rules of Procedure EP 159
          procedure/dossier_of_the_committee
          Old
          IMCO/8/00401
          New
          • IMCO/8/00401
          procedure/final/url
          Old
          http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32016R0425
          New
          https://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32016R0425
          procedure/instrument
          Old
          Regulation
          New
          • Regulation
          • Repealing Directive 89/686/EEC Amended by 2017/0353(COD)
          procedure/other_consulted_institutions
          European Economic and Social Committee
          procedure/subject
          Old
          • 2.10.03 Standardisation, EC/EU standards and trade mark, certification, compliance
          • 3.40.17 Manufactured goods
          • 4.15.15 Health and safety at work, occupational medicine
          • 4.20 Public health
          • 4.60.08 Safety of products and services, product liability
          New
          2.10.03
          Standardisation, EC/EU standards and trade mark, certification, compliance
          4.15.15
          Health and safety at work, occupational medicine
          4.20
          Public health
          4.60.08
          Safety of products and services, product liability
          procedure/summary
          • Repealing Directive 89/686/EEC
          activities/12
          date
          2016-03-31T00:00:00
          docs
          type
          Final act published in Official Journal
          procedure/final
          url
          http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoc&lg=EN&numdoc=32016R0425
          title
          Regulation 2016/425
          procedure/stage_reached
          Old
          Procedure completed, awaiting publication in Official Journal
          New
          Procedure completed
          activities/11
          date
          2016-03-09T00:00:00
          body
          CSL
          type
          Final act signed
          procedure/stage_reached
          Old
          Awaiting signature of act
          New
          Procedure completed, awaiting publication in Official Journal
          activities/1/committees/3
          body
          EP
          shadows
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/2/committees/3
          body
          EP
          shadows
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/5/committees/3
          body
          EP
          shadows
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/6/committees/3
          body
          EP
          shadows
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          committees/3
          body
          EP
          shadows
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/9
          date
          2016-02-12T00:00:00
          body
          CSL
          type
          Council Meeting
          council
          Economic and Financial Affairs ECOFIN
          meeting_id
          3445
          other/0
          body
          CSL
          type
          Council Meeting
          council
          Former Council configuration
          activities/9
          date
          2016-02-12T00:00:00
          body
          EP/CSL
          type
          Act adopted by Council after Parliament's 1st reading
          procedure/stage_reached
          Old
          Political agreement in Council on its 1st reading position
          New
          Awaiting signature of act
          activities/8/docs/0/text
          • The European Parliament adopted by 577 votes to 48, with 86 abstentions, a legislative resolution on the proposal for a regulation of the European Parliament and of the Council on personal protective equipment.

            Parliament’s position, adopted at first reading following the ordinary legislative procedure, amended the Commission proposal as follows:

            Purpose and scope: the Regulation lays down requirements for the design and manufacture of personal protective equipment (PPE) which is to be made available on the market, in order to ensure protection of the health and safety of users.

            Amendments aiming to include in the scope of the Regulation equipment to protect against cleaning materials of weak action or prolonged contact with water. Other substances and mixtures which are hazardous to health include atmospheres with oxygen deficiency and harmful biological agents which are now inserted into Annex I, Category III which includes exclusively the risks that may cause very serious consequences such as death or irreversible damage to health.

            Excluded from the scope of the legislation are PPE:

            • designed to be used for self-defence, with the exception of PPE intended for sporting activities;
            • designed for private use to protect against  atmospheric conditions that are not of an extreme nature and damp and water during dishwashing;
            • for exclusive  use on seagoing vessels or aircraft that are subject to the relevant international treaties applicable in Member States;
            • for head, face or eye protection of users, that is covered by Regulation No 22 of the United Nations Economic Commission for Europe on uniform provisions concerning the approval of protective helmets and their visors for drivers and passengers of motor cycles and mopeds.

            Definitions: PPE should also mean:

            • equipment designed and manufactured to be worn or held by a person for protection against one or more risks to that person's health or safety;
            • connexion systems for equipment that are not held or worn by a person, that are designed to connect that equipment to an external device or to a reliable anchorage point, that are not designed to be permanently fixed and that do not require fastening works before use.

            Obligations of economic operators (manufacturers, importers, distributors):

            Manufacturers and importers shall, when deemed appropriate with regard to the risks presented by PPE, carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring.

            Manufacturers shall:

            • ensure that the PPE is accompanied by the instructions and information, as well as any labelling, shall be clear, understandable, intelligible and legible;
            • either provide the EU declaration of conformity with the PPE or include in the instructions and information the internet address at which the EU declaration of conformity can be accessed;
            • further to a reasoned request from a competent national authority, provide it with all the information and documentation, in paper or electronic form, necessary to demonstrate the conformity of the PPE with this Regulation.

            CE marking: the CE marking shall be affixed before the PPE is placed on the market. The CE marking and, where applicable, the identification number of the notified body may be followed by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall take appropriate action in the event of improper use of that marking.

            Accreditation system: in the recitals, it is stipulated that the system set out in this Regulation should be complemented by the accreditation system provided for in Regulation (EC) No 765/2008.

            Transparent accreditation ensuring the necessary level of confidence in certificates of conformity, should be considered by the national public authorities throughout the Union as the preferred means of demonstrating the technical competence of conformity assessment bodies.

            However, national authorities may consider that they possess the appropriate means of carrying out that evaluation themselves. In such cases, in order to ensure the appropriate level of credibility of evaluations carried out by other national authorities, they should provide the Commission and the other Member States with the necessary documentary evidence demonstrating the compliance of the conformity assessment bodies evaluated with the relevant regulatory requirements

            Appeal against decisions of notified bodies: notified bodies shall ensure that a transparent and accessible appeal procedure against their decisions is available.

            Market surveillance: in line with the New Legislative Framework (NLF) on regulation of goods and in order to ensure legal certainty, Parliament proposed to clarify that rules on Union market surveillance and control of products entering the Union market provided for in Regulation (EC) No 765/2008 apply to PPE covered by this Regulation. Members also introduced provisions relating to the procedure at national level for dealing with PPE presenting a risk, Union safeguard procedure as well as PPE presenting a risk for the health and safety of persons.

          activities/1/committees/5
          body
          EP
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/2/committees/5
          body
          EP
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/5/committees/5
          body
          EP
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/6/committees/5
          body
          EP
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          activities/7/docs
          • url: http://www.europarl.europa.eu/sides/getDoc.do?secondRef=TOC&language=EN&reference=20160119&type=CRE type: Debate in Parliament title: Debate in Parliament
          activities/7/type
          Old
          Debate scheduled
          New
          Debate in Parliament
          activities/8/docs
          • url: http://www.europarl.europa.eu/sides/getDoc.do?type=TA&language=EN&reference=P8-TA-2016-0012 type: Decision by Parliament, 1st reading/single reading title: T8-0012/2016
          activities/8/type
          Old
          Vote in plenary scheduled
          New
          Decision by Parliament, 1st reading/single reading
          committees/5
          body
          EP
          responsible
          True
          committee
          IMCO
          date
          2014-07-17T00:00:00
          committee_full
          Internal Market and Consumer Protection
          rapporteur
          group: ECR name: FORD Vicky
          procedure/stage_reached
          Old
          Awaiting Parliament 1st reading / single reading / budget 1st stage
          New
          Political agreement in Council on its 1st reading position
          activities/7/type
          Old
          Debate in plenary scheduled
          New
          Debate scheduled
          procedure/subject/0
          Old
          2.10.03 Standardisation, EC standards and trademark, certification, compliance
          New
          2.10.03 Standardisation, EC/EU standards and trade mark, certification, compliance
          activities/7/type
          Old
          Indicative plenary sitting date, 1st reading/single reading
          New
          Debate in plenary scheduled
          activities/8
          date
          2016-01-20T00:00:00
          body
          EP
          type
          Vote in plenary scheduled
          activities/0/docs/0/celexid
          CELEX:52014PC0186:EN
          activities/4
          date
          2015-04-23T00:00:00
          body
          unknown
          type
          Committee decision to open interinstitutional negotiations with report adopted in committee
          activities/7/date
          Old
          2015-10-27T00:00:00
          New
          2016-01-19T00:00:00
          activities/5/docs/0/text
          • The Committee on the Internal Market and Consumer Protection adopted the report by Vicky FORD (ECR, UK) on the proposal for a regulation of the European Parliament and of the Council on personal protective equipment.

            The committee recommended that Parliament’s position adopted at first reading following the ordinary legislative procedure should amend the commission proposal as follows:

            Purpose and scope: the Regulation lays down requirements for the design and manufacture of personal protective equipment (PPE) which is being made available on the market in order to ensure the protection of users and rules on its free movement in the Union.

            Amendments aiming to include in the scope of the Regulation equipment to protect against oxygen deficiency (e.g. diving equipment), chemicals, biological agents and radiation/radioactive contamination, laser radiation and radioactive contamination, and explosive fragments are now inserted into Annex I, Category III.

            Excluded from the scope of the legislation are PPE:

            • designed to be used for self-defence, with the exception of PPE intended for sporting activities;
            • intended for private use to protect against: (i) damp and water not of an extreme nature; (ii) heat, for which the economic operator does not explicitly describe and market the products as having a protective function;
            • in the form of clothing intended for private use, with reflective or fluorescent garments which are exclusively included for reasons of design or decoration, and for which the economic operator does not describe and market the products as having a protective function;
            • designed and placed on the market as artisanal products which are decorative in nature.

            Definitions: Members wanted to see more specific technical provisions, regarding:

            • connection systems as items essential to the PPE's function;
            • adding a definition of 'demonstration' and 'field test' and permitting field testing to take place. Field tests should not be designed to test the protection performance of the PPE but to evaluate other non-protective aspects such as comfort, ergonomics and design. 

            Obligations of economic operators (manufacturers, importers, distributors):

            Manufacturers should:

            • keep the technical documentation and the EU declaration of conformity for at least five years after the PPE has been placed on the market (rather than 10 years as proposed by the Commission);
            • ensure that instructions, as well as any labelling, are clear, understandable and intelligible;
            • ensure that performance as recorded during relevant technical tests to check the levels of classes of protection provided by the PPE is available electronically or upon request.

            Manufacturers should include with the EPP either the simplified EU declaration of conformity or include in the instructions or information leaflet the web site address where the EU declaration of conformity might be seen.

            Importers should:

            • indicate, on the PPE their contact details in the official language or languages of the Member State(s) in which the PPE is to be marketed;
            • ensure that PPE is accompanied by the instructions and safety information in a language which can be easily understood by consumers;
            • with regard to the risks presented by PPE, carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring.

            Members stressed that importers and distributors should immediately inform the manufacturer and the competent national authorities if they have reason to believe that PPE that they have placed on the market is not in conformity with the Regulation.

            Examination certificate: the PPE should be examined on the basis of the latest scientific evidence. The maximum period of validity of the EU type-examination certificate should be five years and a process for reviewing the certificate should be provided. Following a positive review, a renewed certificate may continue to be valid for further periods, each of which should be for a maximum of five years.

            Presumption of conformity: unless otherwise provided for by Union harmonisation legislation, the withdrawal of a harmonised standard shall not invalidate existing certificates issued by notified bodies. Products produced in accordance with the existing certificate shall still benefit from continuing conformity with the essential requirements and may continue to be placed on the market until the end of the validity of the relevant certificates issued by notified bodies.

            CE marking: the CE marking and, where applicable, the identification number of the notified body may be accompanied by a pictogram or other marking indicating the risk against which the PPE is intended to protect. Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall take appropriate action in the event of improper use of that marking.

            Notification of conformity assessment bodies: accreditation should be the general rule for notified bodies. Members also stipulated that:

            • Member States must notify manufacturers if a notified body has ceased activity;
            • any appeal procedure must be transparent and accessible.

            Market surveillance: noting that the existing PPE legislation is in need of updating in line with the New Legislative Framework (NLF) on regulation of goods, Members introduced a new Chapter that will take into account: the requirements of the market surveillance regulation when the latter has been finalised; Union market surveillance and control of products entering the Union market; procedure applicable to PPE presenting a risk at national level, safeguard measures, etc.

            Requirements for employers: Members clarified the requirements for employers who provide PPE to their employees. Accordingly, employers shall provide PPE that complies with the relevant Union provisions on design and manufacture with respect to safety and health.

          activities/5/docs
          • url: http://www.europarl.europa.eu/sides/getDoc.do?type=REPORT&mode=XML&reference=A8-2015-0148&language=EN type: Committee report tabled for plenary, 1st reading/single reading title: A8-0148/2015
          activities/6/date
          Old
          2015-09-08T00:00:00
          New
          2015-10-27T00:00:00
          activities/0/docs/0/celexid
          CELEX:52014PC0186:EN
          activities/0/docs/0/celexid
          CELEX:52014PC0186:EN
          activities/0/docs/0/celexid
          CELEX:52014PC0186:EN
          links/European Commission/title
          Old
          PreLex
          New
          EUR-Lex
          activities/5
          date
          2015-04-30T00:00:00
          body
          EP
          type
          Committee report tabled for plenary, 1st reading/single reading
          committees
          procedure/stage_reached
          Old
          Awaiting committee decision
          New
          Awaiting Parliament 1st reading / single reading / budget 1st stage
          activities/4
          date
          2015-04-23T00:00:00
          body
          EP
          type
          Vote in committee, 1st reading/single reading
          committees
          procedure/Modified legal basis
          Rules of Procedure of the European Parliament EP 150
          activities/4
          date
          2015-09-08T00:00:00
          body
          EP
          type
          Indicative plenary sitting date, 1st reading/single reading
          activities/3
          body
          CSL
          meeting_id
          3353
          docs
          url: http://register.consilium.europa.eu/content/out?lang=EN&typ=SET&i=SMPL&ROWSPP=25&RESULTSET=1&NRROWS=500&DOC_LANCD=EN&ORDERBY=DOC_DATE+DESC&CONTENTS=3353*&MEET_DATE=04/12/2014 type: Debate in Council title: 3353
          council
          Competitiveness (Internal Market, Industry, Research and Space)
          date
          2014-12-04T00:00:00
          type
          Council Meeting
          activities/1/committees/3/shadows/4
          group
          Verts/ALE
          name
          DURAND Pascal
          activities/2/committees/3/shadows/4
          group
          Verts/ALE
          name
          DURAND Pascal
          committees/3/shadows/4
          group
          Verts/ALE
          name
          DURAND Pascal
          activities/2
          date
          2014-10-20T00:00:00
          body
          EP
          type
          Committee referral announced in Parliament, 1st reading/single reading
          committees
          activities/1/committees/3/shadows/3
          group
          GUE/NGL
          name
          MAŠTÁLKA Jiří
          committees/3/shadows/3
          group
          GUE/NGL
          name
          MAŠTÁLKA Jiří
          activities/1/committees/0
          body
          EP
          responsible
          False
          committee
          EMPL
          date
          2014-09-30T00:00:00
          committee_full
          Employment and Social Affairs
          rapporteur
          group: EFD name: AGEA Laura
          committees/0
          body
          EP
          responsible
          False
          committee
          EMPL
          date
          2014-09-30T00:00:00
          committee_full
          Employment and Social Affairs
          rapporteur
          group: EFD name: AGEA Laura
          activities/1/committees/2/shadows/0
          group
          EPP
          name
          ARIMONT Pascal
          activities/1/committees/2/shadows/1
          group
          S&D
          name
          WESTPHAL Kerstin
          committees/2/shadows/0
          group
          EPP
          name
          ARIMONT Pascal
          committees/2/shadows/1
          group
          S&D
          name
          WESTPHAL Kerstin
          activities/1/committees/2/date
          2014-07-17T00:00:00
          activities/1/committees/2/rapporteur
          • group: ECR name: FORD Vicky
          committees/2/date
          2014-07-17T00:00:00
          committees/2/rapporteur
          • group: ECR name: FORD Vicky
          activities/1/committees/2
          body
          EP
          shadows
          group: ALDE name: ROCHEFORT Robert
          responsible
          True
          committee_full
          Internal Market and Consumer Protection
          committee
          IMCO
          committees/2
          body
          EP
          shadows
          group: ALDE name: ROCHEFORT Robert
          responsible
          True
          committee_full
          Internal Market and Consumer Protection
          committee
          IMCO
          procedure/subject/0
          Old
          2.10.03 Standardisation, EC standards and trade mark, certification, compliance
          New
          2.10.03 Standardisation, EC standards and trademark, certification, compliance
          procedure/dossier_of_the_committee
          Old
          IMCO/7/15568
          New
          IMCO/8/00401
          activities/0/docs/0/text
          • PURPOSE: to lay down requirements for the design and manufacture of personal protective equipment (PPE) in order to ensure the health and safety protection of users and rules on its free movement in the Union.

            PROPOSED ACT: Regulation of the European Parliament and the Council.

            ROLE OF THE EUROPEAN PARLIAMENT: the European Parliament decides in accordance with the ordinary legislative procedure and on an equal footing with the Council.

            BACKGROUND: Directive 89/686/EEC on personal protective equipment was adopted on 21 December 1989 and became fully applicable as from 1 July 1995. It sets out basic requirements that PPE must comply with in order to be made available on the EU market.

            The PPE Directive applies to PPE that is defined as “any device or appliance designed to be worn or held by an individual for protection against one or more health and safety hazards”.

            While the directive has successfully achieved its objectives in creating a single market and ensuring a high level of protection for users of PPE, certain problems have been encountered in its implementation. These concern products on the market that do not ensure an adequate level of protection, diverging approaches of the notified bodies, the effectiveness of the market surveillance as well as risks related to protective equipment which is currently not covered by the PPE Directive.

            The proposal modifies and clarifies a number of the provisions of the existing Directive and aligns it with the provisions of Decision No 768/2008/EC establishing a common framework for the marketing of products (NLF Decision). The Commission has already proposed the alignment of nine Directives to the NLF Decision within an NLF implementation package adopted on 21 November 2011.

            IMPACT ASSESSMENT: the preferred option consists of amending the PPE Directive as it: (i) lead to an improved level of protection of the health and safety of the users; (ii) ensures a more effective work of the market surveillance authorities and consequently reduces the non-compliant products; (iii) does not entail significant costs for economic operators and notified bodies.

            CONTENT: this proposal intends to replace Directive 89/686/EEC on personal protective equipment by a Regulation. Its general objectives are to ensure a high level of protection of human health and safety whilst guaranteeing fair competition for economic operators on the Union market and simplifying the regulatory environment in this area.

            The proposal also clarifies a number of provisions of the existing Directive and aligns it with those of the Decision No 768/2008/EC establishing a common framework for the marketing of products (decision on the new legislative framework).

            Scope: the Commission proposes to enlarge the scope of the current PPE Directive by deleting the exclusions of PPE designed and manufactured for private use against heat, damp and water. The proposal keeps the other existing exclusions and clarifies that it does not apply to PPE for head, face or eye protection, subject to the relevant UNECE Regulation, of users of two- or three-wheeled motor vehicles.

            Two PPE specific definitions have been added in order to clarify the applicable conformity assessment procedures: “Individually adapted PPE” and “Made-to-measure PPE”.

            Making available on the market, free movement, obligations of economic operators, CE marking: the proposal:

            • contains the typical provisions for product-related Union harmonisation legislation and sets out the obligations of the relevant economic operators (manufacturers, authorised representatives, importers and distributors), in accordance with the NLF Decision;
            • obliges the manufacturer of PPE to draw up a technical documentation and to ensure that the PPE is accompanied by a copy of the EU declaration of conformity or a simplified EU declaration of conformity.

            Notified bodies: the proposal sets out requirements for national authorities responsible for conformity assessment bodies (notified bodies). It leaves the ultimate responsibility for designating and monitoring notified bodies with the individual Member State.

            Categories and Conformity assessment: the proposal simplifies the definition of the categories of PPE. The category only depends on the risk against which the PPE is intended to protect. Provisions are set out for made-to-measure PPE. PPE intended to protect the user against drowning, cuts by hand-held chain-saws, high-pressure cutting, bullet wounds or knife stabs, and harmful noise are subject to the most stringent conformity assessment procedure.

            Minor amendments have been made which change marginally three essential health and safety requirements (EHSR) in order to remove requirements shown to be impracticable or that create confusion.

            Application: the proposed Regulation will become applicable two years after its entry into force to allow manufacturers, notified bodies and Member States time to adapt to the new requirements. However, the designation of notified bodies pursuant to the new requirements and process needs to start shortly after the entry into force of this Regulation.

            Transitional provisions are foreseen for products manufactured and the certificates issued by notified bodies under Directive 89/686/EEC so as to allow stocks to be absorbed and ensure a smooth transition to the new requirements.

            DELEGATED ACTS: this proposal contains provisions empowering the Commission to adopt delegated acts in accordance with Article 290 of the Treaty on the Functioning of the European Union.

          activities/0
          date
          2014-03-27T00:00:00
          docs
          url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2014&nu_doc=0186 celexid: CELEX:52014PC0186:EN type: Legislative proposal published title: COM(2014)0186
          type
          Legislative proposal published
          body
          EC
          commission
          DG: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry Commissioner: TAJANI Antonio
          activities/1/committees
          • body: EP responsible: False committee_full: Employment and Social Affairs committee: EMPL
          • body: EP responsible: False committee_full: Environment, Public Health and Food Safety committee: ENVI
          • body: EP responsible: True committee_full: Internal Market and Consumer Protection committee: IMCO
          • body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE
          committees/0
          body
          EP
          responsible
          False
          committee_full
          Employment and Social Affairs
          committee
          EMPL
          committees/1
          body
          EP
          responsible
          False
          committee_full
          Environment, Public Health and Food Safety
          committee
          ENVI
          committees/2
          body
          EP
          responsible
          True
          committee_full
          Internal Market and Consumer Protection
          committee
          IMCO
          committees/3
          body
          EP
          responsible
          False
          committee_full
          Industry, Research and Energy
          committee
          ITRE
          other/0
          body
          EC
          dg
          commissioner
          TAJANI Antonio
          procedure/Mandatory consultation of other institutions
          Economic and Social Committee
          procedure/dossier_of_the_committee
          IMCO/7/15568
          procedure/legal_basis
          • Treaty on the Functioning of the EU TFEU 114
          activities/0/body
          Old
          EC
          New
          EP
          activities/0/commission
          • DG: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry Commissioner: TAJANI Antonio
          activities/0/date
          Old
          2014-03-27T00:00:00
          New
          2014-04-02T00:00:00
          activities/0/docs
          • url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2014&nu_doc=0186 celexid: CELEX:52014PC0186:EN type: Legislative proposal published title: COM(2014)0186
          activities/0/type
          Old
          Legislative proposal published
          New
          Committee referral announced in Parliament, 1st reading/single reading
          activities/1
          date
          2014-04-02T00:00:00
          body
          EP
          type
          Committee referral announced in Parliament, 1st reading/single reading
          committees
          committees/0
          body
          EP
          responsible
          False
          committee_full
          Employment and Social Affairs
          committee
          EMPL
          committees/1
          body
          EP
          responsible
          False
          committee_full
          Environment, Public Health and Food Safety
          committee
          ENVI
          committees/2
          body
          EP
          responsible
          True
          committee_full
          Internal Market and Consumer Protection
          committee
          IMCO
          committees/3
          body
          EP
          responsible
          False
          committee_full
          Industry, Research and Energy
          committee
          ITRE
          other/0
          body
          EC
          dg
          commissioner
          TAJANI Antonio
          procedure/Mandatory consultation of other institutions
          Economic and Social Committee
          procedure/dossier_of_the_committee
          IMCO/7/15568
          procedure/legal_basis
          • Treaty on the Functioning of the EU TFEU 114
          activities
          • date: 2014-03-27T00:00:00 docs: url: http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!DocNumber&lg=EN&type_doc=COMfinal&an_doc=2014&nu_doc=0186 celexid: CELEX:52014PC0186:EN type: Legislative proposal published title: COM(2014)0186 body: EC type: Legislative proposal published commission: DG: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry Commissioner: TAJANI Antonio
          • date: 2014-04-02T00:00:00 body: EP type: Committee referral announced in Parliament, 1st reading/single reading committees: body: EP responsible: False committee_full: Employment and Social Affairs committee: EMPL body: EP responsible: False committee_full: Environment, Public Health and Food Safety committee: ENVI body: EP responsible: True committee_full: Internal Market and Consumer Protection committee: IMCO body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE
          committees
          • body: EP responsible: False committee_full: Employment and Social Affairs committee: EMPL
          • body: EP responsible: False committee_full: Environment, Public Health and Food Safety committee: ENVI
          • body: EP responsible: True committee_full: Internal Market and Consumer Protection committee: IMCO
          • body: EP responsible: False committee_full: Industry, Research and Energy committee: ITRE
          links
          European Commission
          other
          • body: EC dg: url: http://ec.europa.eu/enterprise/ title: Enterprise and Industry commissioner: TAJANI Antonio
          procedure
          dossier_of_the_committee
          IMCO/7/15568
          Mandatory consultation of other institutions
          Economic and Social Committee
          reference
          2014/0108(COD)
          instrument
          Regulation
          legal_basis
          Treaty on the Functioning of the EU TFEU 114
          stage_reached
          Awaiting committee decision
          summary
          Repealing Directive 89/686/EEC
          subtype
          Legislation
          title
          Personal protective equipment
          type
          COD - Ordinary legislative procedure (ex-codecision procedure)
          subject