Next event: Text adopted by Parliament, 1st reading/single reading 2024/04/10 more...
- Decision by Parliament, 1st reading 2024/04/10
- Approval in committee of the text agreed at 1st reading interinstitutional negotiations 2024/02/13
- Coreper letter confirming interinstitutional agreement 2024/02/02
- Text agreed during interinstitutional negotiations 2024/02/02
- Results of vote in Parliament 2023/07/11
- Decision by Parliament, 1st reading 2023/07/11
- Matter referred back to the committee responsible 2023/07/11
- Committee report tabled for plenary, 1st reading 2023/06/02
- Vote in committee, 1st reading 2023/05/23
- Committee opinion 2023/05/15
- Committee opinion 2023/02/09
- Contribution 2022/12/21
- Amendments tabled in committee 2022/12/20
- Amendments tabled in committee 2022/12/20
- Amendments tabled in committee 2022/12/20
- Committee draft report 2022/11/14
- Economic and Social Committee: opinion, report 2022/10/26
- Referral to associated committees announced in Parliament 2022/09/15
- MATTHIEU Sara (Verts/ALE) appointed as rapporteur in ENVI 2022/09/05
Progress: Awaiting Council's 1st reading position
Role | Committee | Rapporteur | Shadows |
---|---|---|---|
Lead | IMCO | DOLESCHAL Christian ( EPP) | GRAPINI Maria ( S&D), GOZI Sandro ( Renew), GRUFFAT Claude ( Verts/ALE), BASSO Alessandra ( ID), FIDANZA Carlo ( ECR), KONEČNÁ Kateřina ( GUE/NGL) |
Committee Opinion | BUDG | ||
Committee Opinion | ENVI | MATTHIEU Sara ( Verts/ALE) | Malin BJÖRK ( GUE/NGL), Sirpa PIETIKÄINEN ( PPE), Ondřej KNOTEK ( RE), Marcos ROS SEMPERE ( S&D) |
Committee Opinion | ITRE | ARIMONT Pascal ( EPP) | Iskra MIHAYLOVA ( RE), Bronis ROPĖ ( Verts/ALE), Beata SZYDŁO ( ECR), Ivan DAVID ( ID), Marcos ROS SEMPERE ( S&D) |
Lead committee dossier:
Legal Basis:
RoP 57, TFEU 114
Legal Basis:
RoP 57, TFEU 114Subjects
Events
The European Parliament adopted, by 498 votes to 124 with 16 abstentions, European Parliament amendments to the proposal for a regulation of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products, amending Regulation (EU) 2019/1020 and repealing Regulation (EU) 305/2011.
The matter was referred back to the committee responsible for inter-institutional negotiations.
Purpose of the Regulation
The revised Construction Products Regulation (CPR) should:
- lay down conditions for the placing and making available on the market of construction products defining harmonised rules for expressing the environmental and safety performance and life-cycle assessment of construction products in relation to their essential characteristics;
- establish obligations incumbent on economic operators dealing with construction products or their components or with double use products, including the de-installation and reuse of those products.
This Regulation contributes to the efficient functioning of the internal market by ensuring the free movement of safe and sustainable construction products in the Union and to the objectives of a green and digital transition by preventing and reducing the impact that construction products have on the environment and on the health and safety of people.
‘ Construction product’ means any product or a kit which is produced and placed on the market or supplied to the construction site for incorporation in a permanent manner in construction works or parts thereof within the Union, including 3D-printed products or other items covered by this Regulation.
Reducing complexity
The CPR is a piece of legislation that should be understandable and implementable by economic actors throughout the value chain . The amendments therefore aim to clarify, reduce bureaucratic burden and - in same cases - delete provisions that present a real risk of regulatory overreach.
Legislators should be careful not to create uncertainty by introducing unnecessary adjustments.
Division of powers
Members believe that Member States should set the safety level of construction works in accordance with their responsibilities to their citizens, while the EU sets the framework conditions for the internal market. Member States should remain competent to adopt provisions relating to construction works.
Essential characteristics of products
The essential characteristics of construction products should be identified by the Commission, taking into account the regulatory needs of the Member States and Union safety, environmental, circularity and climate objectives.
Members consider that priority should be given to the elaboration of standards . The Commission should be able to supplement the Regulation by adopting delegated acts where this is genuinely necessary in the interests of the internal market: for example, in the event of unjustified delays in adopting standards, where there is an urgent need to adopt standards or where essential characteristics are not covered by the standard.
CE marking
A CE marking should be sufficient proof of the conformity of a product with the characteristics and requirements laid down by this Regulation. Member States should not therefore introduce any barriers to their markets based on characteristics and requirements that are not covered by the harmonised zone.
Construction products standards
Construction products standards should be established by the European standardisation organisations on the basis of a standardisation request issued by the Commission. The Commission should adopt implementing acts laying down a clear and stable set of rules for the whole standardisation process including roles, responsibilities, competences and the general procedural deadlines for all stakeholders involved as well as templates to be used.
Digital gateway
To facilitate this communication, Member States should register in the Single Digital Gateway all their national regulatory and administrative measures directly or indirectly influencing the usability of construction products on their territory.
Supply of the declaration of performance and of the declaration of conformity
To simplify supply chain communication, declarations of performance and declarations of conformity should additionally be made available in a machine-readable format . This would allow the user via an app to check conformity with the application rules of the Member State where the product is used. An important prerequisite for machine-readable declarations is a standardised IT format, which is required for each harmonised technical specification.
Obligations of all economic operators
The economic operator should be able to present all documentation, including the declaration of performance and the declaration of conformity, to the authorities using the digital construction products passports.
Unless the safety of the products or the safety of the construction works is adversely affected, the manufacturer would be subject to the following obligations:
- design and manufacture products and their packaging in such a way that the protection of human health and their overall environmental sustainability are maximised , including for climate and biodiversity, as well as energy and resource efficiency, indoor air quality and the avoidance of substances of concern unless a lower level:
- ensure that, where technically and economically feasible and without impacting the safety of construction works, by 10 years after the adoption of performance classes in accordance with Article 4(4), point (a), or Article 5(2), all products placed on the market fall within the two highest environmental performance classes established;
- without creating unjustified barriers to the single market, give preference to local, reusable, sustainably sourced bio-based or recyclable materials, materials gained from re-use or recycling and by-products, while taking into account the environmental and climate impacts of transporting such materials;
- comply with the minimum recycled content obligations and other limit values relating to aspects of environmental sustainability, including climate sustainability, biodiversity and the efficient use of energy and resources, set out in the harmonised technical specifications;
- make available, at least in the permalinks of their own websites or by means of QR codes and in the digital product passport, relevant instructions for use.
Obligations relating to 3D printing of construction products
A natural or legal person who 3D prints construction products should (i) satisfy with the obligations incumbent on manufacturers when placing their products on the market; (ii) use the appropriate 3D data sets; (iii) ensure that the materials used have undergone the procedures applicable to products under the Regulation; (iv) ensure that the information provided by the manufacturer of the 3D data set and the information provided by the manufacturer of the printing equipment coincide.
Establishment of a digital passport for construction products
Members introduced a new article stipulating that the Commission should adopt delegated acts to establish a digital passport for construction products. The digital passport should contain the declaration of performance or the combined declaration of performance and conformity, product information and technical documentation.
The digital passport should be accessible free of charge to all economic operators , customers, users and authorities by means of QR codes, a bar code, an RFID chip or a permalink.
The digital passports should be accessible on the manufacturer's website, in its database or on an online platform chosen by the manufacturer of the products concerned for ten years after the last product has been placed on the market. The Commission should establish and maintain a register storing the information contained in the construction product passports by means of delegated acts.
Legal and planning certainty for the transition period
While the Commission proposes that Regulation (EU) 305/2011 be repealed with effect from 1 January 2045, Members propose that that Regulation be repealed with effect from the date of entry into force of this Regulation, with some exceptions which would be repealed with effect from 10 years after its date of entry into force.
Parliament proposed that the Commission should establish, no later than six months after entry into force, a working plan for transition and standardisation priorities covering at least the following three-year period. The work plan should be publicly available, regularly updated and contain a list of product families considered to be priorities for issuing standardisation requests.
The Committee on the Internal Market and Consumer Protection adopted the report by Christian DOLESCHAL (EPP, DE) on the proposal for a regulation of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products, amending Regulation (EU) 2019/1020 and repealing Regulation (EU) 305/2011.
The committee responsible recommended that the position of the European Parliament adopted at first reading under the ordinary legislative procedure should amend the proposal as follows:
Purpose of the Regulation
The revised Construction Products Regulation (CPR) should:
- lay down conditions for the placing and making available on the market of construction products defining harmonised rules for expressing the environmental and safety performance and life-cycle assessment of construction products in relation to their essential characteristics;
- establish obligations incumbent on economic operators dealing with construction products or their components or with double use products, including the de-installation and reuse of those products.
This Regulation contributes to the efficient functioning of the internal market by ensuring the free movement of safe and sustainable construction products in the Union and to the objectives of a green and digital transition by preventing and reducing the impact that construction products have on the environment and on the health and safety of people.
‘ Construction product ’ means any product or a kit which is produced and placed on the market or supplied to the construction site for incorporation in a permanent manner in construction works or parts thereof within the Union, including 3D-printed products or other items covered by this Regulation.
Reducing complexity
The CPR is a piece of legislation that should be understandable and implementable by economic actors throughout the value chain. The amendments therefore aim to clarify, reduce bureaucratic burden and - in same cases - delete provisions that present a real risk of regulatory overreach.
Legislators should be careful not to create uncertainty by introducing unnecessary adjustments.
Division of powers
Members believe that Member States should set the safety level of construction works in accordance with their responsibilities to their citizens, while the EU sets the framework conditions for the internal market. Member States should remain competent to adopt provisions relating to construction works. The harmonised zone should also apply to public contracts, grants or other positive incentives with the exception of fiscal incentives.
Essential characteristics of products
The essential characteristics of construction products should be identified by the Commission, taking into account the regulatory needs of the Member States and Union safety, environmental, circularity and climate objectives.
Members consider that priority should be given to the elaboration of standards .
The Commission should be able to supplement the Regulation by adopting delegated acts where this is genuinely necessary in the interests of the internal market: for example, in the event of unjustified delays in adopting standards, where there is an urgent need to adopt standards or where essential characteristics are not covered by the standard.
Product information requirements
All construction products covered by this Regulation should, prior to their placing on the market, satisfy the product information requirements set out in Annex I Part C3. The product information requirements set out in Annex I Part C3 may be specified for the respective product family or category by means of delegated acts adopted by the Commission or by means of standards following a standardisation request made by the Commission.
Construction products standards
Construction products standards should be established by the European standardisation organisations on the basis of a standardisation request issued by the Commission. The Commission should adopt implementing acts laying down a clear and stable set of rules for the whole standardisation process including roles, responsibilities, competences and the general procedural deadlines for all stakeholders involved as well as templates to be used.
Digital gateway
To facilitate this communication, Member States should register in the Single Digital Gateway all their national regulatory and administrative measures directly or indirectly influencing the usability of construction products on their territory.
Supply of the declaration of performance and of the declaration of conformity
To simplify supply chain communication, declarations of performance and declarations of conformity should additionally be made available in a machine-readable format . This would allow the user via an app to check conformity with the application rules of the Member State where the product is used. An important prerequisite for machine-readable declarations is a standardised IT format, which is required for each harmonised technical specification.
Obligations of all economic operators
The economic operator should be able to present all documentation, including the declaration of performance and the declaration of conformity, to the authorities using the digital construction products passports.
Unless the safety of the products or the safety of the construction works is adversely affected, the manufacturer would be subject to the following obligations:
- design and manufacture products and their packaging in such a way that the protection of human health and their overall environmental sustainability are maximised, including for climate and biodiversity, as well as energy and resource efficiency, indoor air quality and the avoidance of substances of concern unless a lower level:
- ensure that, where technically and economically feasible and without impacting the safety of construction works, by 10 years after the adoption of performance classes in accordance with Article 4(4), point (a), or Article 5(2), all products placed on the market fall within the two highest environmental performance classes established;
- without creating unjustified barriers to the single market, give preference to local, reusable, sustainably sourced bio-based or recyclable materials, materials gained from re-use or recycling and by-products, while taking into account the environmental and climate impacts of transporting such materials;
- comply with the minimum recycled content obligations and other limit values relating to aspects of environmental sustainability, including climate sustainability, biodiversity and the efficient use of energy and resources, set out in the harmonised technical specifications;
- make available, at least in the permalinks of their own websites or by means of QR codes and in the digital product passport, relevant instructions for use.
Establishment of a digital passport for construction products
Members introduced a new article stipulating that the Commission should adopt delegated acts to establish a digital passport for construction products. The digital passport should contain the declaration of performance or the combined declaration of performance and conformity, product information and technical documentation.
The digital passport should be accessible free of charge to all economic operators, customers, users and authorities by means of QR codes, a bar code, an RFID chip or a permalink.
The digital passports should be accessible on the manufacturer's website, in its database or on an online platform chosen by the manufacturer of the products concerned for ten years after the last product has been placed on the market. The Commission should establish and maintain a register storing the information contained in the construction product passports by means of delegated acts.
Legal and planning certainty for the transition period
While the Commission proposes that Regulation (EU) 305/2011 be repealed with effect from 1 January 2045, Members propose that that Regulation be repealed with effect from the date of entry into force of this Regulation, with some exceptions which would be repealed with effect from 10 years after its date of entry into force.
Members proposed that the Commission should establish, no later than six months after entry into force, a working plan for transition and standardisation priorities covering at least the following three-year period. The work plan should be publicly available, regularly updated and contain a list of product families considered to be priorities for issuing standardisation requests.
PURPOSE: to lay down harmonised rules for the making available on the market and direct installation of construction products.
PROPOSED ACT: Regulation of the European Parliament and of the Council.
ROLE OF THE EUROPEAN PARLIAMENT: the European Parliament decides in accordance with the ordinary legislative procedure and on an equal footing with the Council.
BACKGROUND: Regulation (EU) No 305/2011 of the European Parliament and of the Council (the Construction Products Regulation or CPR) lays down harmonised conditions for the marketing of construction products. The CPR ensures the smooth functioning of the single market and the free movement of construction products in the EU. It does so through harmonised technical specifications, which provide for a common technical language on how to test and communicate the performance of construction products (e.g. reaction to fire, thermal conductivity or sound insulation).
In order to contribute to the objectives of the European Green Deal and the Circular Economy Action Plan, and to ensure safe construction products, inherent product requirements related to safety, functionality and protection of environment, including climate, are necessary.
CONTENT: the proposed Regulation seeks to achieve a well-functioning single market for construction products ; and to make the framework apt to contribute to the objectives of the green and digital transition, particularly the modern, resource-efficient and competitive economy.
Its specific objectives aim to:
- unblock the technical harmonisation system;
- reduce national barriers to trade for products covered by the CPR;
- improve enforcement and market surveillance;
- provide more clarity (more comprehensive definitions, reducing overlaps, collision rules with other legislation) and simplification;
- reduce the administrative burden, including through simplification and digitalisation;
- ensure safe construction products;
- contribute to reducing the overall climate and environmental impact of construction products, including through the application of digital tools (Digital Product Passport).
The proposal:
- improves the standardisation process which has been underperforming and is outdated . In the absence of appropriate standardisation at the EU, environmental and safety performances of construction products are addressed in different ways at the national level, leading to a divergence in the requirements for economic operators;
- defines the scope, including construction products, 3D-printing related products and services, key parts, part or materials if requested by the manufacturer, kits or assemblies covered harmonised technical specification or EADs, pre-fabricated one-family houses;
- defines the basic work requirements and modalities to establish the essential characteristics (performance-based, e.g. recycled content) of construction products;
- empowers the Commission to adopt delegated acts defining thresholds and classes of performance in relation to the essential characteristics as well as delegated acts containing technical specifications and those concerning technical progress or to cover new risks and environmental aspects;
- defines the ‘ harmonised zone ’, as opposed to the areas under the responsibility of Member States. In addition, it sets up a mechanism to deal with Member States imperative regulatory needs on health, safety or protection of the environment, including climate;
- lays down provisions governing the declaration of performance (DoP) and its applicable exemptions (including for micro-enterprises who do no trade cross-border, under certain conditions: for remanufactured products or for parts of construction works prepared for re-use or remanufactured);
- lays down rules on declaration of conformity (DoC). To minimise the administrative burden, the DoC should be combined with the DoP. The DoP and a DoC can be supplied in an electronic format or via a permalink. They should be supplied in the languages required by the Member States where the manufacturer intends to make the product available;
- sets the general principles and conditions for the CE marking and for use of other markings;
- defines the environmental obligations for manufacturers including the obligation to declare the mandatory sustainability characteristics, the global warming potential , and performance-based requirements or the minimum recycled content ;
- provides for simplified procedures in order to reduce the administrative burden, particularly for SMEs and micro-enterprises;
- empowers the Commission to set up an EU construction products database or system to facilitate the access to product information (especially DoP, DoC and instructions for use).
Documents
- Text adopted by Parliament, 1st reading/single reading: T9-0188/2024
- Decision by Parliament, 1st reading: T9-0188/2024
- Approval in committee of the text agreed at 1st reading interinstitutional negotiations: PE758.887
- Coreper letter confirming interinstitutional agreement: GEDA/A/(2024)000829
- Text agreed during interinstitutional negotiations: PE758.887
- Results of vote in Parliament: Results of vote in Parliament
- Decision by Parliament, 1st reading: T9-0253/2023
- Committee report tabled for plenary, 1st reading: A9-0207/2023
- Committee opinion: PE738.659
- Committee opinion: PE736.636
- Contribution: COM(2022)0144
- Amendments tabled in committee: PE739.670
- Amendments tabled in committee: PE739.827
- Amendments tabled in committee: PE739.828
- Committee draft report: PE738.491
- Economic and Social Committee: opinion, report: CES2765/2022
- Document attached to the procedure: EUR-Lex
- Document attached to the procedure: SEC(2022)0167
- Document attached to the procedure: EUR-Lex
- Document attached to the procedure: SWD(2022)0087
- Document attached to the procedure: EUR-Lex
- Document attached to the procedure: SWD(2022)0088
- Document attached to the procedure: EUR-Lex
- Document attached to the procedure: SWD(2022)0089
- Legislative proposal published: COM(2022)0144
- Legislative proposal published: EUR-Lex
- Document attached to the procedure: EUR-Lex SEC(2022)0167
- Document attached to the procedure: EUR-Lex SWD(2022)0087
- Document attached to the procedure: EUR-Lex SWD(2022)0088
- Document attached to the procedure: EUR-Lex SWD(2022)0089
- Economic and Social Committee: opinion, report: CES2765/2022
- Committee draft report: PE738.491
- Amendments tabled in committee: PE739.670
- Amendments tabled in committee: PE739.827
- Amendments tabled in committee: PE739.828
- Committee opinion: PE736.636
- Committee opinion: PE738.659
- Coreper letter confirming interinstitutional agreement: GEDA/A/(2024)000829
- Text agreed during interinstitutional negotiations: PE758.887
- Text adopted by Parliament, 1st reading/single reading: T9-0188/2024
- Contribution: COM(2022)0144
Activities
- Christian DOLESCHAL
Plenary Speeches (0)
History
(these mark the time of scraping, not the official date of the change)
docs/13 |
|
events/9/summary |
|
docs/13 |
|
events/9/summary |
|
docs/13 |
|
events/9 |
|
procedure/stage_reached |
Old
Awaiting Parliament's position in 1st readingNew
Awaiting Council's 1st reading position |
docs/13 |
|
events/9 |
|
procedure/stage_reached |
Old
Awaiting Parliament's position in 1st readingNew
Awaiting Council's 1st reading position |
docs/13 |
|
events/9 |
|
procedure/stage_reached |
Old
Awaiting Parliament's position in 1st readingNew
Awaiting Council's 1st reading position |
docs/13 |
|
events/9 |
|
procedure/stage_reached |
Old
Awaiting Parliament's position in 1st readingNew
Awaiting Council's 1st reading position |
links |
|
links |
|
docs/12 |
|
events/8/docs |
|
events/8 |
|
docs/11 |
|
docs/11/date |
Old
2022-12-20T00:00:00New
2022-12-21T00:00:00 |
events/5 |
|
docs/11 |
|
docs/11 |
|
events/5/summary |
|
docs/11 |
|
events/5 |
|
events/6 |
|
forecasts |
|
forecasts/0 |
|
forecasts/0 |
|
docs/11 |
|
events/4/summary |
|
docs/11/docs/0/url |
https://www.europarl.europa.eu/doceo/document/A-9-2023-0207_EN.html
|
events/4/docs/0/url |
https://www.europarl.europa.eu/doceo/document/A-9-2023-0207_EN.html
|
docs/11 |
|
events/4/docs |
|
events/4 |
|
procedure/stage_reached |
Old
Awaiting committee decisionNew
Awaiting Parliament's position in 1st reading |
events/3 |
|
procedure/Other legal basis |
Rules of Procedure EP 159
|
docs/10/date |
Old
2023-05-03T00:00:00New
2023-05-15T00:00:00 |
docs/10 |
|
forecasts |
|
procedure/Legislative priorities/0 |
|
procedure/Legislative priorities/0/title |
Old
Joint Declaration on EU legislative priorities for 2023 and 2024New
Joint Declaration 2023-24 |
procedure/Legislative priorities/1 |
|
procedure/Legislative priorities/1 |
|
docs/9/docs/0/url |
https://www.europarl.europa.eu/doceo/document/ENVI-AD-736636_EN.html
|
docs/9 |
|
docs/0 |
|
events/0 |
|
docs/0 |
|
events/0 |
|
docs/4 |
|
docs/5/docs/0/url |
https://www.europarl.europa.eu/doceo/document/IMCO-AM-739670_EN.html
|
docs/7/docs/0/url |
https://www.europarl.europa.eu/doceo/document/IMCO-AM-739828_EN.html
|
docs/6/docs/0/url |
https://www.europarl.europa.eu/doceo/document/IMCO-AM-739827_EN.html
|
docs/0 |
|
docs/5 |
|
docs/5/date |
Old
2022-12-19T00:00:00New
2022-12-20T00:00:00 |
docs/6 |
|
docs/6 |
|
docs/6/date |
Old
2022-12-19T00:00:00New
2022-12-20T00:00:00 |
docs/7 |
|
docs/7 |
|
docs/7/date |
Old
2022-12-19T00:00:00New
2022-12-20T00:00:00 |
docs/8 |
|
events/0 |
|
docs/6/date |
Old
2022-12-15T00:00:00New
2022-12-19T00:00:00 |
docs/7/date |
Old
2022-12-17T00:00:00New
2022-12-19T00:00:00 |
docs/8/date |
Old
2022-12-17T00:00:00New
2022-12-19T00:00:00 |
docs/7/date |
Old
2022-12-16T00:00:00New
2022-12-17T00:00:00 |
docs/8/date |
Old
2022-12-16T00:00:00New
2022-12-17T00:00:00 |
docs/7/date |
Old
2022-12-15T00:00:00New
2022-12-16T00:00:00 |
docs/8/date |
Old
2022-12-15T00:00:00New
2022-12-16T00:00:00 |
docs/0 |
|
docs/5 |
|
docs/7 |
|
docs/7/date |
Old
2022-12-14T00:00:00New
2022-12-15T00:00:00 |
events/0 |
|
docs/5 |
|
docs/6 |
|
docs/7 |
|
docs/4 |
|
docs/4 |
|
docs/4 |
|
committees/0/shadows/5 |
|
committees/1 |
Old
New
|
committees/2 |
Old
New
|
committees/3 |
Old
New
|
procedure/Legislative priorities |
|
docs/0 |
|
events/0 |
|
docs/0 |
|
events/0 |
|
committees/0/shadows/4 |
|
events/2 |
|
docs/0 |
|
events/0 |
|
docs/0 |
|
events/0 |
|
procedure/legal_basis/0 |
Rules of Procedure EP 57
|
committees/1 |
|
committees/1/rapporteur |
|
committees/3 |
|
docs/0/docs/0 |
|
docs/0 |
|
events/0 |
|
docs/0 |
|
events/0 |
|
committees/0/shadows/1 |
|
committees/1 |
Old
New
|
committees/2 |
Old
New
|
committees/3 |
Old
New
|
docs/2/docs/0 |
|
docs/3/docs/0 |
|
committees/0/shadows/2 |
|
committees/1 |
Old
New
|
committees/2 |
Old
New
|
committees/3 |
Old
New
|
docs/1/docs/0 |
|
events/0/docs/1 |
|
docs/0 |
|
events/0 |
|
committees/0/shadows/1 |
|
events |
|
procedure/dossier_of_the_committee |
|
procedure/stage_reached |
Old
Preparatory phase in ParliamentNew
Awaiting committee decision |
procedure/title |
Old
Construction products: harmonised conditions for the marketingNew
New Regulation on Construction Products |
commission |
|
committees/0 |
|
committees/0 |
|
committees/1/opinion |
False
|
committees/3/rapporteur |
|
docs/0/docs/0/url |
http://www.europarl.europa.eu/RegData/docs_autres_institutions/commission_europeenne/com/2022/0144/COM_COM(2022)0144_EN.pdf
|
docs/0/summary |
|